Ds doll high heels

Realrobotdoll · Post by **Realrobotdoll** » Fri May 26, 2017 8:32 am

Hi can a ds doll wear hi heels if standing useing a bracket as iv got the none standing ds doll

Mishka1965 · Post by **Mishka1965** » Fri May 26, 2017 10:57 am

Sure,

I have always used heels for mine. On my DS160+ and 158, they stand on all photo sets. Now I stand them very carefully, and never harm the feet by rough handling. My understanding is that some people get problems quickly by them perhaps not being able to hold the doll (60+lb) for a long time and very gently lower her onto the ground.
Anyway, I always use heels on all dolls, as that is what I like

Mishka

haremlover · Post by **haremlover** » Fri May 26, 2017 11:44 am

Great encouragement - thanks

Is this the new soft silicone or the 2014 harder silicone?

Best wishes

Harem

samara78 · Post by **samara78** » Fri May 26, 2017 12:10 pm

Size 3 heels are great. On the 2014 dolls there will be no damage owing to the firmness of her. Any newer dolls can be stood with a bracket and heels.

Mishka1965 · Post by **Mishka1965** » Fri May 26, 2017 12:50 pm

Mine are 2015 but I did add permatex silicone under her feet a 1/2 year ago. Although her feet feel soft, I am also amazed no damage occurred, but that's probably because I am very careful and photo them sparingly. I have had to do all sorts of minor cosmetic repairs over the years, but they're both ok and stand fine as their joints are strong!

Mishka

Realrobotdoll · Post by **Realrobotdoll** » Fri May 26, 2017 12:55 pm

Hi I had the doll for about 7 months now I got it from love doll UK used it's Head:

lilith

Body:

145plus-used

Eyes:

Green

Skin Tone:

LPink

Joint Type:

Loose

Finger Bones:

NoBone

Nails:

paints

Pubic Hair:

browns

Not sure when it was made

haremlover · Post by **haremlover** » Fri May 26, 2017 9:25 pm

What do you mean by adding Permatex under the feet? Cut and inside the heel? Or external coating?

Dating dolls- perhaps we might start a register of serial numbers. . .

Best wishes

Harem

Mishka1965 · Post by **Mishka1965** » Fri May 26, 2017 10:31 pm

A 12g blunt cannulated needle and permatex adhesive is injected under the silicone skin just above the metal foot.
The permatex is harder than the silicone and gives a nice solid foot for standing.
I use 1/2 tube per foot.
Mishka

Snow- · Post by **Snow-** » Fri May 26, 2017 11:21 pm

looks great. but i prefer sneaker, can protect feet

MannyCan · Post by **MannyCan** » Fri May 26, 2017 11:27 pm

Mishka1965 wrote:A 12g blunt cannulated needle and permatex adhesive is injected under the silicone skin just above the metal foot.
The permatex is harder than the silicone and gives a nice solid foot for standing.
I use 1/2 tube per foot.
Mishka

Any chance you can give more information or a tutorial on this?

haremlover · Post by **haremlover** » Sat May 27, 2017 5:45 am

Mishka1965 wrote:under the silicone skin just above the metal foot.

You are a star! This may well be the solution to my 158+ emerging from the cupboard for more photoshoots.

What do you mean by "above the metal foot" - do you not mean below, as in below the heel?

It depends on whether we're in the northern or southern hemisphere . . .

and on a worldwide forum that's a little difficult to determine.

Many thanks

Best wishes

Harem

MannyCan · Post by **MannyCan** » Sat May 27, 2017 9:35 am

haremlover wrote:
Mishka1965 wrote:under the silicone skin just above the metal foot.
You are a star! This may well be the solution to my 158+ emerging from the cupboard for more photoshoots.

YES!! Pictures please!!

Mishka1965 · Post by **Mishka1965** » Sat May 27, 2017 10:43 am

No pics, as I just did the procedure after I inflated the DS doll's breasts with air. I had extra glue and used it. There's a heel plate in the foot which can perforate the skin and that's what you see when a puncture occurs. So to seal you would add silicone between the metal plate and foot to create a cushion or buffer of silicone. It may need more than one treatment, but on mine I simply added about 5cc of the adhesive there and let dry. She should be sitting when done and glue may need clingfilm to finish drying and not leak out.

Mishka

RJAce1014 · Post by **RJAce1014** » Sat May 27, 2017 7:50 pm

Mishka1965 wrote:A 12g blunt cannulated needle and permatex adhesive is injected under the silicone skin just above the metal foot.
The permatex is harder than the silicone and gives a nice solid foot for standing.
I use 1/2 tube per foot.
Mishka

That's a great idea only that we need tutorials for it. It's a long years weighting we define a mod to help our girls stand and DS is not doing anything about it. I request a hard silicone on both feet on which they refuse. They can do hard silicone doll though but that would make her heavier.

This is a sum great idea. Not only what I asked for before but also keeps up the hard silicone on her heels.

Cheers,

RJ