Introducing April my 145 plus
Moderator: jiayi
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Introducing April my 145 plus
The items she came with were a white satin rob with red lace trim, 2 inserts, 2 wigs (short and long) and the 2 bolts for the standing feet which had 2 washers and 2 nuts each. The problem with the bolts is they don't screw in all the way for some reason so I can't stand her up at the moment. For the right foot the bolt barely goes in but the left goes in further but not far enough, the bolts are about 3 inches long. I wiped her down with warm water and antibacterial soap then fresh clean water then I powdered her. My only 3 complaints is she's a bit shiny looking, stuff sticks to her easily and the seams are pretty extreme. Other than that she's very nice so far and I'm gonna try her out Tonight to see how she compares to my TPE doll.
Sorry about the mess in the pics and i'll try to take more when I get a chance. If you have any questions about her just let me know.
- Attachments
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
- Attachments
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: Introducing April my 145 plus
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
I hope I can figure out this standing feet option because it didn't come with a hanging kit.
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: Introducing April my 145 plus
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
Re: Introducing April my 145 plus
Her arrival: http://dollforum.com/forum/viewtopic.php?f=267&t=80325
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
Here she is as a Blonde
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
Re: Introducing April my 145 plus
- von_Shredhead
- Doll Guru
- Posts: 5561
- Joined: Tue Mar 06, 2012 7:34 pm
- Location: Third Rock From The Sun
- Contact:
Re: Introducing April my 145 plus
As far as shiny-ness ... a good bath and powdering should alleviate her shine.
I eagerly await your review and comparison between DS and TPE doll. I am curious as to how soft DS silicone mix has evolved since 2015.
Cheers!
Von
Nina's Thread - Doll Sweet 145cm
Lila's Thread - Doll Sweet 145cm
Heather's Thread - 4Woods Allure
Sativa's Thread - Virgin Rose Kelu
Naomi's Thread - 1AM WM125
"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life."
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
- RaDiv
- Platinum Member
- Posts: 3654
- Joined: Tue Nov 06, 2007 12:00 am
- Location: Northern Europe
- Contact:
Re: Introducing April my 145 plus
A little warning from me, the sleeping bag can stain your doll. About the bolts, you should check the threads and check for anything obscuring the threads. If the factory has used a worn threading tap it may be harder to screw. "Refreshing" the threads can be a good idea, if metric threading taps can be obtained in the US.
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
About the threads I haven't checked but that's a good idea about re-tapping if I can't figure out the problem. I also might try different bolts from the hardware store.
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211
-
- Contributing Poster
- Posts: 46
- Joined: Wed Dec 08, 2010 6:00 pm
- Contact:
Re: Introducing April my 145 plus
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2556
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Introducing April my 145 plus
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)
Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)
All via BCD (Jeff is the man)
CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387
April's thread
viewtopic.php?f=143&t=89211