Entry issues

TXDOLLMAN · Post by **TXDOLLMAN** » Sun Mar 12, 2017 12:16 am

Does anybody have trouble entering there doll?

TXDOLLMAN · Post by **TXDOLLMAN** » Sun Mar 12, 2017 12:19 am

Seems like I will need Viagra to enter my doll

Stewie studmuffin · Post by **Stewie studmuffin** » Sun Mar 12, 2017 3:58 am

Well the harder you are the easier it will be.

Especially with the small opening of TPE inserts. Is your doll a built in or a removable? I would think it would be easier to enter a built in. The problem with a removable is that if you don't hit the opening just right, it will move all over the place or get jammed up in the doll. And if you're like me and can't see what's going on down there, then it can indeed get a bit frustrating.

One thing that helped in my case was to bevel out the opening of the insert into the shape of a funnel to help with entry. I wouldn't want to open up a built in like that, but I suppose it can be done if you are extra careful.

crowe111 · Post by **crowe111** » Sun Mar 12, 2017 9:13 am

I know exactly what you mean and once I'm in, it feels like I'm being pushed out because of the tightness. I'm thinking that I made a mistake with getting the removable.

symmes · Post by **symmes** » Sun Mar 12, 2017 10:03 am

Some suggestions based on my ~1.5 months of ownership:

Try different positions; some may be easier than others.
In many positions, the doll's legs must be spread fairly wide.
In missionary or similar front-entry positions, bend the doll's pelvis forward -- the skeleton is designed for this, and it will make the vaginal opening more accessible. If you were to try to stand the doll like this, she'd be leaning forward significantly.
Lubricate! I use Vaseline inside the insert and on my own matching part. Others prefer other lubricants, but I use Vaseline because it's helpful in the care of TPE dolls. (Caution: Vaseline is bad for silicone, so if anybody with a silicone doll reads this, do not use Vaseline!)
Be sure you're fully erect. If you're even a little shy of that, it'll become much harder to make use of your doll.
Use your hand to locate the opening and guide yourself into it.
If your doll uses an insert, be sure it's fully inserted. I've found that if this isn't done, the insert's "business end" tends to bend out of the way or even pop out, neither of which is helpful. Some people have suggested using dowels to help push the insert all the way in. I find that if it doesn't go all the way in, placing my hand between the vaginal opening and outside of the insert lets me grasp it and push it the rest of the way in. (TPE is very stretchy, so it's surprisingly easy to do this.)
For Jinsan (WM, OR, and YL) products, inserts are available with both 2cm and 2.5cm openings. If you've got a 2cm model, maybe you need a 2.5cm one. I've got one of each and don't notice a big difference, myself; but of course this is a very personal thing.

trauma · Post by **trauma** » Sun Mar 12, 2017 12:24 pm

Had a RD2 that was tough on entry, disappointed to hear WM is having this problem.

Dont they have a 2.5/larger insert available?

Boobiologist · Post by **Boobiologist** » Sun Mar 12, 2017 12:40 pm

An effective resolution of this problem is to use the doll with an insert without insert. Use condom and vaseline as lubricant. Water based lubricant can't be used in this case, because cavity is not sealed and water can get to the skeleton. Using this method you may entrance the doll without any erection at all and get it in the process.

LaDollyVita · Post by **LaDollyVita** » Sun Mar 12, 2017 12:43 pm

symmes wrote: If your doll uses an insert, be sure it's fully inserted. [...] I find that if it doesn't go all the way in, placing my hand between the vaginal opening and outside of the insert lets me grasp it and push it the rest of the way in.

Great post, symmes!

Here is a video by George at X/S Dolls that shows how to properly put in an insert using a WM girl as the model. It shows the technique symmes is suggesting:

https://www.youtube.com/watch?v=MicEroIwgoo

Boobiologist · Post by **Boobiologist** » Sun Mar 12, 2017 12:48 pm

LaDollyVita wrote:
symmes wrote: If your doll uses an insert, be sure it's fully inserted. [...] I find that if it doesn't go all the way in, placing my hand between the vaginal opening and outside of the insert lets me grasp it and push it the rest of the way in.
Great post, symmes!

Here is a video by George at X/S Dolls that shows how to properly put in an insert using a WM girl as the model. It shows the technique symmes is suggesting:

https://www.youtube.com/watch?v=MicEroIwgoo

I most like the number of views of this video and comments.

LaDollyVita · Post by **LaDollyVita** » Sun Mar 12, 2017 12:56 pm

Boobiologist wrote:I most like the number of views of this video and comments.

Yes, the views George gets are amazing. However, public comments on anything lovedoll related are a cesspool. Once you've read them on one video / article, you've basically read them for *any* video / article.

TXDOLLMAN · Post by **TXDOLLMAN** » Sun Mar 12, 2017 1:25 pm

My doll has a fixed vagina.
The doll is brand new and looks great but I am so frustrated with my experience trying to enjoy her that I am thinking it is not worth the hassle and may just sell her.

William403 · Post by **William403** » Sun Mar 12, 2017 1:51 pm

TXDOLLMAN wrote:My doll has a fixed vagina.
The doll is brand new and looks great but I am so frustrated with my experience trying to enjoy her that I am thinking it is not worth the hassle and may just sell her.

Try not to get too discouraged. I had the same problem when I got my doll. Like others said above, it really is about finding the right position, angle and lubrication (I also use lots of Vaseline) Once you get it figured out, I am sure she will be very enjoyable for you. It took me several tries to make each position I like to work, but once I did, it is easier to get her back in her correct position the next time.

ILoveCoffee · Post by **ILoveCoffee** » Sun Mar 12, 2017 2:02 pm

Don't give up! It can be frustrating to find the best position for you, and that does not help with getting a satisfactory erection. The doll can't position herself like a RG, so it's all up to you to position her. Once you get it figured out, you can position her ahead of time, and have the lube ready. When you are in the mood, you won't be having to fiddle with her. Once you get it figured out, your confidence along with your erection will increase. And don't expect to be able to "finish" the first few times. That will "cum" eventually, and be easier as you play with your doll more.

I have found that having the doll laying on the bed, with me standing on the floor, was the position that worked for me, and now I can get her in the exact position quickly and easily, before my passion wanes. I found that over time, I am able to keep an erection for longer periods, and now am always able to finish. I am now working on "cowgirl", but I haven't got her pre-positioning quite worked out, but that will also come with practice.

I found it easier to use the lube that came with the doll, as it is slicker than Vaseline. Vaseline seems to diminish the feeling.

Starquake · Post by **Starquake** » Sun Mar 12, 2017 3:53 pm

It can take a while to find the right angles

Similar to the above advice, I find lifting the doll on a few pillows can make a big difference and give you a few more options to show her a good time.

oberyn · Post by **oberyn** » Sun Mar 12, 2017 5:36 pm

Boobiologist wrote:An effective resolution of this problem is to use the doll with an insert without insert. Use condom and vaseline as lubricant. Water based lubricant can't be used in this case, because cavity is not sealed and water can get to the skeleton. Using this method you may entrance the doll without any erection at all and get it in the process.

Good idea gonna try that.