Will it fit in her mouth?

jms033 · Post by **jms033** » Sat Dec 16, 2017 5:52 pm

Hello all, a few months back, I ordered a WM 135cm doll with a #20 head. No complaints at all, but I have one concern. The website said it has: "Sex enter: Oral, Vagina, Anal" Which is great, but I'm a little worried about her mouth. I am only average size, but it seems too big for her mouth, and I'm afraid of taring or ripping her mouth area if I try oral with her. Is the TPE "stretchy" enough to handle a slow "BJ"? Thanks for any help!

Broven · Post by **Broven** » Sat Dec 16, 2017 5:56 pm

I've had oral from my WM 140cm with head #36 several times. I'm average in size myself and it hasn't been a problem. I'm nervous to do it too often for the reasons you mentioned. And oral with these WM dolls causes their eyes to bulge out, so it's a little weird looking anyway. I usually try to brush her hair into her face to hide her eyes as best I can, but when you're done her eyes stay bugged out until you push them back in. It makes her look VERY surprised. lol

Stewie studmuffin · Post by **Stewie studmuffin** » Sat Dec 16, 2017 6:01 pm

I suppose having a cock shoved into her mouth without any warning WOULD be a bit surprising! :haha4:

Nord · Post by **Nord** » Sat Dec 16, 2017 6:11 pm

I have a 140 and are of average size too and have no problem with oral action. I only do it with my #39 head though which have closed eyes, and the good thing with that is that there are no eyes that pop out during the act. The TPE is indeed very stretchy and wont break from that alone if using enough lube, but always keep an eye after any damage just in case, which can be fixed before it gets worse. Don't forget to treat the opening with vaseline from time to time as with the other openings on your doll, which will keep it stretchy and enduring over time!

Worth noting however is that WM has several different designs to their heads. I have a #53 as well which is a lot tighter due to a tongue that is molded inside her mouth, while my #39 is more open and came with a loose tongue that could be set in place or skipped. Then there are also the more advanced versions with the enhanced oral experience, which I personally know nothing about yet. There might be more variants as well that are unique to specific heads. I have no idea about the #20 unfortunately.

The Romantic · Post by **The Romantic** » Sat Dec 16, 2017 7:03 pm

Treat the entire mouth area inside and out with Vaseline occasionally to enhance her ability to stretch and accommodate you. Let it soak in overnight before the first time.

BluWolf · Post by **BluWolf** » Sat Dec 16, 2017 8:41 pm

Broven wrote:I've had oral from my WM 140cm with head #36 several times. I'm average in size myself and it hasn't been a problem. I'm nervous to do it too often for the reasons you mentioned. And oral with these WM dolls causes their eyes to bulge out, so it's a little weird looking anyway. I usually try to brush her hair into her face to hide her eyes as best I can, but when you're done her eyes stay bugged out until you push them back in. It makes her look VERY surprised. lol

has her eyes even popped out of there sockets. after reading your post i could not stop

every time i think about it. the thought of the eyes bulging out just cracks me up :haha4:

puma uma · Post by **puma uma** » Sat Dec 16, 2017 9:22 pm

yea i had no issue with mine doing oral. i just remember her eyes popping out while i was doing it lol.

jms033 · Post by **jms033** » Sun Dec 17, 2017 7:08 am

Thanks everyone.

It was something that always concerned me, but I'll have to give it a try now!

deerman · Post by **deerman** » Sun Dec 17, 2017 9:29 am

Where there is a will there is a way!

avante · Post by **avante** » Mon Dec 18, 2017 10:49 am

I'll always put vaseline in the mouth first...but really, just the dick head in a tiny bit and her pretty head is already starting to look messed up...for me it is really, really, unbelievable not a single producer (as far as I know) has actually fixed this flaw. I call it a flaw, since for most people eyeballs popping out and face deformation is kind off a turn off...sort of makes you feel like maybe she don't want it

Maxwedge · Post by **Maxwedge** » Mon Dec 18, 2017 11:44 am

Yes, it was a MAJOR turn off for me. Now cheeks puffed out, eyes wide would be cute/hot, but eyeballs coming out of the sockets and the nose stretching up like the transformation in American Werewolf in London?? Not hot. Bone killer.

There was a recent thread on here ("Give me Head" or something) where the poster was doing surgery to the "skull" to open the fiberglass (?) skull structure up inside. I think there has to be an easy change that can come from the manufacturers, and make them LOTS of MONEY. Hear that Manufacturers? This is my idea-

The skull structure looks like it's a "bubble" of some resin or FG that is blown in a mold, to give it it's shape. It has a lower "jaw" support structure, but no upper jaw. This allows the roof of mouth to stretch outward to accept your, um.. whatever you're pushing in there. But this causes her face to distort unnaturally and is worse with smaller heads, even though they usually have the same 5.1" depth as larger heads. RD has a flexible lower jaw system and mouth/throat inserts, but I can't afford a $6000 doll. So my wish is that manufacturers eliminate the lower "jaw" and put an upper jaw in. At least something across the cheek bones. This would keep the face's shape, with no distortion of her pretty eyes and nose. With no FG in the lower face the mouth will now stretch Down, much more realistically. It would look much more realistic if you saw it from the side, but you'll actually be above her and just see her cheek puffing out. VERY realistic in my mind. And looking at the naked skull, I think it would be just as easy to manufacture.

It would just take a manufacturer to make the new design and skins for it (with current hollow chins now being solid TPE, and upper jaw opened up for cheek structure to fit). It would be totally different than the current standard, but the same costs to manufacture once the molds were created. And I think they would sell like crazy.

I'd crowd fund that for sure.

avante · Post by **avante** » Mon Dec 18, 2017 11:59 am

Maxwedge wrote:Yes, it was a MAJOR turn off for me. Now cheeks puffed out, eyes wide would be cute/hot, but eyeballs coming out of the sockets and the nose stretching up like the transformation in American Werewolf in London?? Not hot. Bone killer.

There was a recent thread on here ("Give me Head" or something) where the poster was doing surgery to the "skull" to open the fiberglass (?) skull structure up inside. I think there has to be an easy change that can come from the manufacturers, and make them LOTS of MONEY. Hear that Manufacturers? This is my idea-

The skull structure looks like it's a "bubble" of some resin or FG that is blown in a mold, to give it it's shape. It has a lower "jaw" support structure, but no upper jaw. This allows the roof of mouth to stretch outward to accept your, um.. whatever you're pushing in there. But this causes her face to distort unnaturally and is worse with smaller heads, even though they usually have the same 5.1" depth as larger heads. RD has a flexible lower jaw system and mouth/throat inserts, but I can't afford a $6000 doll. So my wish is that manufacturers eliminate the lower "jaw" and put an upper jaw in. At least something across the cheek bones. This would keep the face's shape, with no distortion of her pretty eyes and nose. With no FG in the lower face the mouth will now stretch Down, much more realistically. It would look much more realistic if you saw it from the side, but you'll actually be above her and just see her cheek puffing out. VERY realistic in my mind. And looking at the naked skull, I think it would be just as easy to manufacture.

It would just take a manufacturer to make the new design and skins for it (with current hollow chins now being solid TPE, and upper jaw opened up for cheek structure to fit). It would be totally different than the current standard, but the same costs to manufacture once the molds were created. And I think they would sell like crazy.

I'd crowd fund that for sure.

I'd second that! I my opinion, this really cannot be that complicated...well if you do it pre-TPE casting at least...
Let me assure you, manufacturer that reads this, that if you are the company that puts heads out like these, you'll be my no1 head supplier starting that day!

Saw that mod thread as well btw, but man, I don't want to be doing that...

Maxwedge · Post by **Maxwedge** » Mon Dec 18, 2017 12:18 pm

avante wrote:I'd second that! I my opinion, this really cannot be that complicated...well if you do it pre-TPE casting at least...
Let me assure you, manufacturer that reads this, that if you are the company that puts heads out like these, you'll be my no1 head supplier starting that day!

Saw that mod thread as well btw, but man, I don't want to be doing that...

Yeah, I'm pretty handy / mechanical but I don't want to risk ruining a perfectly good head. We recently crowd-funded two new products from Climax dolls. I wonder if they would make us a new skull design, with 2 or 3 different faces to start with. If they sell out I'm sure they'd add more faces to the line.

DollLove86 · Post by **DollLove86** » Mon Dec 18, 2017 12:27 pm

I also have head 20 and the oral is fantastic, I also have 2 oral videos at my pornhub like below with wm140 head 20 if you dare to watch. Keep it lubed ad wet also it helps if you slide a finger in after to release any air after you insert your member

jms033 · Post by **jms033** » Wed Dec 20, 2017 9:09 pm

DollLove86 wrote:I also have head 20 and the oral is fantastic, I also have 2 oral videos at my pornhub like below with wm140 head 20 if you dare to watch. Keep it lubed ad wet also it helps if you slide a finger in after to release any air after you insert your member

Thanks DollLove86

Now that the holidays are here, I'll have to wait until they are over, before I can have a little "treat" for myself.