163cm Head 45 and 39 Review

xcentrik · Post by **xcentrik** » Fri Aug 14, 2015 8:29 pm

The original thread for posting may be found here: http://dollforum.com/forum/viewtopic.ph ... lit=review

This review is for the WM Doll 163cm
Heads #45 and #39
Skin color is tanned
Shoe size US 5.5 / UK 3
Dress Size XS / S / 00
Green Eyes (on photos they look fake but they actually look very convincing)

The doll shipped on 8/08/15 from China and arrived on 8/14/15 to USA due to a weather delay
There was no strong smell from the tpe. I was not expecting this doll to be this heavy. I can handle the weight but if you are not exactly a fitness freak like me i would advise going for a lighter doll. It may be awkward trying to dress her without laying her flat because you need to juggle the weight on one hand and dress her with the other so be patient otherwise you will either break her costume or your back.

The feet have a solid bone rod like the legs but only the big toe has a wire.
Make sure you powder her well specially on the places where the skin touches like the inner thighs so that the tpe wont stick and tear. Talc will also add an extra softness to the touch.
So far i tested the oral and the insert and they are both really good.
Her vajayjay inner walls are thicker than the old wmdolls so it retains its shape even when the legs are spread out

I just received it a few hours ago so i have several outfit combinations to try from my previous dolls so i will post more photos later.
This is my first TPE doll. Previously ive only had heavily modified inflatables with TPE boobs and inserts so i can assure you the insert is very good and tight.

Her thighs will not lift up to high so certain positions will be painful unless you can move her hip forward or backwards due to the lack of motion range on the legs.

Her fingers and wrists are very delicate so you need to keep that in mind at all times while you pose her or dress her. I would not dare support any of her weight on the wrists. I would rather use her elbows for support. a douche came included with the accessories for cleaner the mouth and anal.

for the insert i carefully flipped it inside out for cleaning and drying but I immediately restored it to it original position.

The wigs shed a little but look acceptable. Keep in mind that blond hair is the most difficult to simulate so if you decide to go for a more realistic wig and you dont want to spend much, kanekalon (synthetic) wigs with highlights may give a realistic blond hair look.

The heads do not really have any fancy makeup so getting a makeup set with eye shadow, countour and lipgloss & lipliner is a must to give her the foxy look. Youtube is your friend if you need help

So far im happy with the quality and craftmanship of the doll. It looks so gorgeous you
will definitely enjoy looking at her in a sexy outfit and taking pictures besides playing with her. More of those pictures later so stay tuned.

Any pierciengs and tatoos you will be seeing in the pictures were added by me after the doll purchase.

xcentrik · Post by **xcentrik** » Fri Aug 14, 2015 8:33 pm

Forgot to mention she has hollow breasts

xcentrik · Post by **xcentrik** » Fri Aug 14, 2015 8:34 pm

Head #39

xcentrik · Post by **xcentrik** » Sat Aug 15, 2015 2:21 am

More information about the unpacking. A lot of accesories came included
USB Warmer
Stain Remover
2 Wigs ( Long brown and Blonde)
Hair Comb
Cotton Gloves ( Size Small )
Operating and Maintenance Guide
Nail Glue
Lipstick
Insert
Pink Dress
Flushing douche
Pink Blanquet
Full body storage bag
Pouch for each head & foam protective eyewear

The blanket is a static electricity magnet
The full body bag came filled with styrofoam beads and it had a little hole underneath so all those millions beads stuck to the doll and everywhere you can think off all over the room
It took me a while clean the mess. Try touching bare metal to discharge your electricity
The gloves dont fit but thats my fault for having big hands. They are size small so maybe you can put them on your doll and even make fingerless gloves
If you plan on using the USB warmer, get a usb extension because the cord is very short. Do not leave the warmer unattended unless you want to find your insert looking like a melted cheese pizza. TPE doesnt have high tolerance for heat like silicone.
If you plan to use the comb make sure you spray the wig with dish washing liquid soapy water and always grab the root of the hair and comb away towards the ends to unentangle.
The wigs came with a hair net so you can keep her hair in place if you wish to sleep with her unless you want to swallow a hairball and find her hair all over the pillow.
All my outfits have been prewashed at least twice and no dark colors. i made sure to get talc without cornstarch as i know from experience tpe attracts bacteria and you dont want putting your manhood in a black bacteria stained insert.
Thats it for now folks!

xcentrik · Post by **xcentrik** » Sat Aug 15, 2015 6:11 am

Its the back to school season

xcentrik · Post by **xcentrik** » Sat Aug 15, 2015 2:10 pm

Thanks guys.

The introduction of the #45 is here:
http://dollforum.com/forum/viewtopic.php?f=215&t=63715

I used a water bottle cap for teeth
The #45 has a long nose bridge with a downwards curved nosetip and flat forehead. It doesnt have a very pronounced bone structure over the eyes. This are very distinct Asian facial feature, like a
Japanese gravure model. The eyes are not asian looking and the face is not very round.
This make it look like a young woman face and slightly older than the #39 which is slightly
smaller.Notice that the makeup has a lot to do with it. If you want to make your face look more
Asian, color the lips darker inside, lighter outside. Eye makeup draws the eyes larger and wider.
Westerner makeup is the opposite and uses countour lines on the face . Asian cheeks makeup is paler and shinier, like Koreans do. Notice that my #45 nose is marked from the styrofoam eye protector during shipping since I just received the package yesterday.

Here are some more pics with the #39 face.

xcentrik · Post by **xcentrik** » Sat Aug 15, 2015 4:26 pm

I first mentioned her thighs would not lift up too high but on a later photo i show she is very flexible. I guess the joints were too stiff since shes only a day old. She has very squeezable breasts but they dont really jiggle too much. So from 1 to 10,
1 = latex
3 = hard silicone
6 = 163cm breasts
7 = silicone breast forms
9 = Busty Aichan Boobs (TPE)
10 = real breasts

xcentrik · Post by **xcentrik** » Sun Aug 16, 2015 7:21 am

some more with the #39 face

xcentrik · Post by **xcentrik** » Sun Aug 16, 2015 9:27 am

the first time i tried putting the insert it was very difficult because the insert is very long and inside the doll it traps air so to take it out again it creates suction. i decided to wrap the insert in a small plastic bag because the plastic bag slides easier with talc powder and doesnt create friction inside the doll. pulling the insert out is super easy with the bag

xcentrik · Post by **xcentrik** » Mon Aug 17, 2015 12:44 am

Day 3 - Head 45
Yeah i know... i know... I need to think of name for each head because right now they are just numbers, but here she is

xcentrik · Post by **xcentrik** » Mon Aug 17, 2015 12:52 am

and the navel pierced

xcentrik · Post by **xcentrik** » Mon Aug 17, 2015 10:27 am

it takes some experimenting. In missionary, if you want to play with her she either needs to have her legs spread out to the sides 180 degrees like if shes doing a split or if i want to lift her legs up i have to carry her and support the back of her torso on a desk. This is because of the position of her girly parts and you trying to go in all the way. Thats just my case but it may vary for you with how you are shaped and length. You can do missionary if you lay on top of her but my two suggestions allow me to look at her at the same time because im angled slightly away from her torso.
Regarding inserts, you can use other inserts like the lilith but the opening is so tight and creates so much suction that somehow i end up using tons of lube. This doesnt happen when i use the same inserts on an inflatable. I ended up getting some aloe vera gel because its cheaper. It was like $6 at Walgreens for 16oz and it comes in a hand lotion dispenser bottle. I havent tried the home made recipe for making water based lube with xhanthan gum and glycerin.
The other orifices are fine but are more difficult to clean and the oral you might want to take the head off. If you try to do oral while sliding on her breasts you put too much stress on her neck. These dolls have an issue where if you tighten the head all the way the neck's flexible tube compresses and with the tension you might end up breaking the neck if you try to move it around because you are over extending it.
If shes in doggie position on the bed and im standing on the floor i have to position her back arched down instead of arched up as expected. it may be because the height of the bed. i had to buy a platform metal bed frame which is 14 inches high underneath to give me space to slide her box under the bed. it was like $100 on ebay for a queen size mattress

xcentrik · Post by **xcentrik** » Mon Aug 17, 2015 11:45 am

The box is 10x17x62 inches(25x43x157cm). You can also use a padded bag of snow skis to store her. Like a 156cm

xcentrik · Post by **xcentrik** » Mon Aug 17, 2015 3:06 pm

There is a "birthmark" between her shoulder blades. Thats the spot where you can screw an eye hook on the spine.
Note that this doll is not designed to be stored hanging.
TPE is like an extremely heavy chewed gum. Silicone dolls are different because the material is not that soft so there no risk of deformation like with the TPE. You may hang it for a couple of minutes but over long periods, the material is so heavy that either
a) the screw will break inside the spine and the doll will fall
b) the doll will deform due to the weight
c) some really cool disaster ( make sure you film it and upload it to youtube )

So with this knowledge most likely i will hang her to take some quick photos but thats it