My Z-One 162cm from BCD 'Fumiko'

DocGrok · Post by **DocGrok** » Wed Jun 21, 2017 12:06 am

This is my formal review of the Z-One 162cm as requested by Jeff, detailing my experience with this wonderful lady

Introduction
I am a 32 year old medical professional who has crazy swing shifts and on-call shifts. This prevents me from exploring more conventional dating scenes with the exception of coworkers, who are either married or too far out of the age range I'd look for in a long term relationship. Thus, I had to look for alternatives for companionship. I've always been attracted to the idea of an artificial companion ever since seeing Weird Science at an early age and finding RealDoll when they premiered has always left a love doll an option in the back of my mind. Unfortunately, their high prices always left it out of the realm of reality as 7000$ is too much for me to purchase sight unseen. Now nearly 20 years later, I stumbled upon TDF and saw there were other excellent dolls that could be had for a third of the price. Due to a relatively uncommon request I had, I decided to go with a silicone doll. Only Z-One offered the body, face, and rather importantly the heating system to complete the experience I was looking for. I chose BCD as my vendor because nearly everyone recommended him above all others and his testaments are longer than my Thesis Paper

I wanted the best vendor for my first (and probably only)doll purchase and he surpassed my expectations! And now, enough rambling about my reasons, time for the review!

Specifications- I chose the 162cm body because it had the curves I wanted at a height that an average real girl would have. At 171cm, the Z-One 170 would have been just slightly too tall and while her hips, legs and ass were gorgeous, I wanted less projection and the illusion of gravity. Furthermore, after reading the two other 170cm reviews, I did not think I would quite have the strength to handle a 110lb doll Here are the options I chose for her:

SKIN 'Normal'
FACE A5
WIG #5

: 7fdfc249-7ee3-4d0b-ae1a-bb81e87ab5e6.jpg (315.84 KiB) Viewed 2215 times

EYES Forest Green
AREOLA SIZE #3
AREOLA COLOR #3

: Nipple Colors.jpg (2.51 MiB) Viewed 2215 times

FINGER NAIL #1
VAGINA Insert
VAGINA COLOR 3 (light brown or pink if unavailable)
TOE NAILS #1
UPGRADES:
STANDING FEET Yes
PUBIC HAIR #3

The Order was placed May 20th, 2017 and I picked her up at the FedEx Depot on June 10th, 2017. 3 weeks from creation to pick up was excellent considering FedEx had a 2 day delay in getting her to me. Jeff kept me updated throughout the creation and shipping process. These are the passport photos Jeff sent me before she boarded her flight

: thumbnail_1.jpg (180.84 KiB) Viewed 2215 times

: thumbnail_3.jpg (190.75 KiB) Viewed 2215 times

As you can see, her areola size was the #2, but I alerted Jeff as soon as I saw the photos and David had the issue corrected before she left the factory.

Shipping Box- The shipping box was quite heavy and barely manageable by myself. It weighed in at 55.7kg according to the FedEx guy at the Shipping Depot. I was able to enlist the aid of the only friend I knew that could keep the secret to himself. After getting the box into the house I noticed some minor damage underneath the thorough taping job Z-One did. It was seriously like trying to break into Ft. Knox. Their custom cut padding held her approximately 3" away from the sides of the box and there was no indentations from the damage on the exterior of the box. The accessories included a pink outfit, her wig, a douching syringe, a metal comb, the insert, a USB orifice warmer, and a vibrator egg(this did not work and I did not care)

: IMG_2604.JPG (1.22 MiB) Viewed 2215 times

: IMG_2606.JPG (986.01 KiB) Viewed 2215 times

: IMG_2605.JPG (1.47 MiB) Viewed 2215 times

Skeleton- I got the tight joints for photography and while I probably should have gotten loose joints, her arm and leg joints have loosened a bit in the 10 days I have owned her( mainly from dressing her), the movements are smooth and I don't move them further than 70 degrees from default as a precautionary measure(don't want tears).

Material- The silicone is very slightly tacky when clean and unpowdered, giving just the right amount of friction. Unfortunately, unpowdered skin will attract every bit of dust, lint, and hair floating in the environment. Once powdered, the skin is deliciously smooth, and damn near necessitates a repowdering because I can't stop touching it.

Body- Her measurements come in at 86cm-63cm-86cm which translates to a 34-25-34 which makes finding outfits particularly easy. She seems to run a US 4-6(S) depending on the brand. She is molded with a hourglass figure and her legs are well defined with calf musculature which is a refreshing departure from thin or undefined legs I see on many of the smaller dolls. The cost of this is that she weighs in at 44.3kg(97.5lbs) which is about the limit of my strength.Her breasts are a teardrop DD(E) and should fit a 30E bra nicely as the 32F bra was loose in the cups even after extensive adjustments. Her body is pretty firm with the exception of the breasts which are softer, slightly jiggly, and feel very real. While I wish her butt was slightly softer, this means I can have her seated for long periods in normal furniture without deformation.

Heating system- copied from my other review
Temperature Rise
Test was performed at 70 degree room with no fan or A/C running.

The system runs for 30minutes then shuts off for safety reasons. I placed 3 probe thermometers Anal, Vaginal and taped one to her breasts( per Anataus' request) and ran the cycle twice.

After the first cycle we had:
Anal 86 degrees
Vaginal 93 degrees
Breast 77 degrees

The heating system is strongest in the bottom 6 quadrants of the abdomen and the medial aspects of the thighs. I suspect they actually reached body temperature after the first cycle.
After the second cycle:
Anal 94 degrees
Vaginal 97 degrees
Breast 82 degrees

At this point all abdominal quadrants were very warm, and as I suspected, the ambient heat transfer was moving to the breasts via radiation. Since I was unable to place a temperature probe into the breast itself, I suspect that the real temp would be a few degrees higher. Since breasts hang outside the chest cavity they are going to be a lower temperature any unless they have been kept under an insulated material or held close to the chest via a brassiere.

In short, get the heating system, you don't have to worry about overheating as it shuts itself after 30 minutes and it makes a huge difference in the realism of the doll

Entries- The entries are lightly textured and the suction is pretty awesome. There are only two issues I've encountered so far:
1) With the insert in the vagina , you must be at 100% full attention, otherwise the vacuum will push you back out quite easily.
2) The face I selected is not the best for oral sex, I did not expect to have oral capacity so this not surprising, but the opening is a small slit in her lips and when penetrating causes the upper lip to fold into the mouth and so have to be mindful of the force you use to prevent tearing. I would suggest a more open mouth if you plan to have a dedicated oral doll such as A35, A39 or A46.

Face- I love the A5 face, the quiet smile she has instantly hooked me and brings great realism to the doll. As I've mentioned elsewhere, This face reminds of a Japanese OL(Office Lady) I had a crush on when I spent two years in Japan. One of the reasons I chose the 162 body was to replicate the look as well, though her breasts were smaller, but hey fantasy right?

Posing/Standing- Please note that Z-One only offers the standing option on the 162/170cm models at request only. I purchased this mainly as a safety precaution in case I had to have her 'half stand' for dressing or table doggy. It definitely helped when dressing her in pants as her ass has quite a projection and makes pulling the pants up to her waist much easier. I try to limit these types of activities to a few minutes at a time as I do not want her skeleton to bend. Otherwise her feet stay in padded athletic socks to prevent damage.

Final Thoughts- I am extremely pleased with this doll. I purchased this doll primarily as a companion and she does not disappoint. Her figure and face are a perfect match for simulating the perfect girlfriend proxy. Her maintenance is very simple due to being silicone and for the most part I have been extremely gentle with her as I want her to last as long as I need her. While I do wish she was about 20-30lbs lighter, she is an excellent strength training regimen as I've probably lost 3-4lbs since owning her and carrying her has gotten significantly easier. I also don't see a practical way for Z-One to implement weight reduction without compromising the build quality and functions they offer(heat +foam = bad)The one thing I do regret is not being able to give her the mineral oil bath I see other users give their TPE dolls(looks sexy and fun as hell), but the difference between wanting to and needing to is a large enough difference that I'm glad I went silicone. She's no pornstar but she is a lady that knows exactly what she wants and I think we satisfy each other very well.

I won't lie, I was extremely apprehensive at laying out a paycheck on something I couldn't see or touch in person, but Jeff made the process extremely smooth and stress free. The ONLY time I wouldn't suggest going through Jeff is if he can't get the doll you want...and he can get a hold of damn near all of them!

He is extremely dedicated to getting you the lady you want exactly the way you want her. He might as well rename the company Bespoke Companion Dolls as far as I'm concerned.As a doll owner himself, he offered several insights and warnings when I was going through the purchasing process, and I found that extremely refreshing as many salespeople want to sell you a product regardless of the outcome. Jeff has a solid-gold reputation and now I know why!

If you go Silicone, go Z-One! They make an extremely fine product at an affordable price

Here are some photos of Fumiko out in the world: