www.6yedollglobal.com/

New 6YE Doll Skeleton (Patented ball-joint design)

6Ye is an all time ready & customer-centric team offering beautiful, realistic and soulful looking sex dolls. Our hand-crafted dolls are a piece of art for us. We have been in the business over 4 years, serving customers all over the world. We do not handle retail sales. Please feel free to inquire for our dolls, then purchase from our authorized resellers.
Website: www.6yedollglobal.com
User avatar
6YeDoll
Manufacturer
Manufacturer
Posts: 468
Joined: Sat Apr 01, 2017 4:09 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by 6YeDoll »

coffee wrote:Both Mark81 and Dollinger have valid points.

I had several dolls picked and could not decide. 6YE doesn't have the body type I like and was not on my radar but I might compromise and get a 6YE skeleton, since all my picks, had something I didn't like and some aspects I really really like anyways.
hey there, may I know what body type you are into?
Please find the list of 6YEdoll Global authorised dealers/resellers here http://www.6yedollglobal.com/buy.html
https://www.SexySexDoll.com - Quality Global Retailer| TDF approved vendor | Free worldwide shipping
https://6yedoll.eu - European site (Free 1 Year Fixing Service in Europe, proficient in French, English, German)
http://dolldesire.com/ - BCD (Jeff) | doll specialist & Guru | TDF approved vendor
https://monamourtoujours.com/ USA | TDF approved vendor

6YE doll ONLY supplies our Premium products to our authorised resellers. All products being sold by other channels are either scam dolls or the old version.

User avatar
Dr Dollinger
Doll Mentor
Doll Mentor
Posts: 1221
Joined: Tue Dec 27, 2016 8:25 pm
Location: From behind the curtain
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by Dr Dollinger »

Without practical use of the skeleton,
knowing how it exactly works
and fail to see what this doll is supposed to be, this theoretical discussion is nearly obsolete.
Otherwise i would call it, an act of pomposity.
Even if you know and maybe get a look, how this ball-joint works, you should be able to compare this with the standard skeleton. If you don't, it might not really helpful.

Since over the last years, you can hear constantly a big shouting for a better skeleton. To stiff joints, to fast loosen, poking & broken wires or dislocated fingers. It's getting better in some ways, but only in small steps. Additionally a lot of doll owners were crying cause of the heavy weight.
Instead of developing, WM and later the other competitors throw one curvy big doll after another on the market with big boobs & butts and even more weight.
Customers forget their complaining and buy. Problems aren't solved. The massive weight creates even more problems with handling, care maintenance, physical problems and injuries. First owners begin to sell their dolls, although they were warned.

6YE is different. They developed this amazing skeleton, that solved most of the big problems instantly.
They use a very nice, soft and durable TPE mix that even has a very pleasant smell. The weight for their big dolls is good to handle. New neck joint & head connector.
Reseller policy is exemplary... Forum activity and communication of vendor & manufacturer in this short period is matchless.

Now, they were asked : Can you go bigger? How is it with joints in the fingers? What's with movement of the shoulders? Standing option without screws?

Unbelievable...
Image
Jazzmine______________________________________________Demona____________________________Druuna

Roona
_

User avatar
mark81
Ex-Member
Posts: 790
Joined: Sun Mar 27, 2016 8:59 am
Location: Ukraine

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by mark81 »

Dr Dollinger wrote:Without practical use of the skeleton, knowing how it exactly works
Please judge from position of first buyer. How can I have practical use of the skeleton if I haven't ever had a doll? But besides owners reviews I know what I want. And this nice place TDF gives opportunity to discuss it with manufacturers.
Dr Dollinger wrote:Now, they were asked : Can you go bigger? How is it with joints in the fingers? What's with movement of the shoulders? Standing option without screws?
Unbelievable...
Unbelievable that people willing for more? That's called progress. Several lines above you were complaining about non-demanding audience btw.
FiveByFive wrote:Mark81, you claim DS dolls can mimic the clavicle/shoulder motion...can you show us?
Sorry, can't find appropriate photo at the moment. But those diagrams were taken directly from their site.

User avatar
windave
Doll Elder
Doll Elder
Posts: 2909
Joined: Mon Jan 08, 2007 12:00 am
Location: left coastal now
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by windave »

Looks promising but what about the protruding shoulder joint moving within the casting?

User avatar
Dr Dollinger
Doll Mentor
Doll Mentor
Posts: 1221
Joined: Tue Dec 27, 2016 8:25 pm
Location: From behind the curtain
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by Dr Dollinger »

mark81 wrote:
Dr Dollinger wrote:Without practical use of the skeleton, knowing how it exactly works
Please judge from position of first buyer. How can I have practical use of the skeleton if I haven't ever had a doll? But besides owners reviews I know what I want. And this nice place TDF gives opportunity to discuss it with manufacturers.
mark81 wrote:
So I can't say that 6Ye's skeleton is quite innovative. Patented ball joints, yeah, great...

How can you judge something, what you even don't know?
How can you judge, the skeleton isn't innovative, when you never own a doll and even don't know how the skeleton practically works?
How can you speak from cheap chinese dolls, when you never got one? And when you think like that, then why are you still here?
Sounds more like self esteem
then a constructive discussion
Image
Jazzmine______________________________________________Demona____________________________Druuna

Roona
_

wel549
Contributing Poster
Contributing Poster
Posts: 32
Joined: Sat May 03, 2014 4:14 pm
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by wel549 »

is it possible to just get the skeleton? i would like to try some animetronics.

User avatar
6YeDoll
Manufacturer
Manufacturer
Posts: 468
Joined: Sat Apr 01, 2017 4:09 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by 6YeDoll »

wel549 wrote:is it possible to just get the skeleton? i would like to try some animetronics.
you mean buy the skeleton only without TPE flesh?
Please find the list of 6YEdoll Global authorised dealers/resellers here http://www.6yedollglobal.com/buy.html
https://www.SexySexDoll.com - Quality Global Retailer| TDF approved vendor | Free worldwide shipping
https://6yedoll.eu - European site (Free 1 Year Fixing Service in Europe, proficient in French, English, German)
http://dolldesire.com/ - BCD (Jeff) | doll specialist & Guru | TDF approved vendor
https://monamourtoujours.com/ USA | TDF approved vendor

6YE doll ONLY supplies our Premium products to our authorised resellers. All products being sold by other channels are either scam dolls or the old version.

wel549
Contributing Poster
Contributing Poster
Posts: 32
Joined: Sat May 03, 2014 4:14 pm
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by wel549 »

6YeDoll wrote:
wel549 wrote:is it possible to just get the skeleton? i would like to try some animetronics.
you mean buy the skeleton only without TPE flesh?

yes. for a 170cm doll hieght.

User avatar
6YeDoll
Manufacturer
Manufacturer
Posts: 468
Joined: Sat Apr 01, 2017 4:09 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by 6YeDoll »

wel549 wrote:
6YeDoll wrote:
wel549 wrote:is it possible to just get the skeleton? i would like to try some animetronics.
you mean buy the skeleton only without TPE flesh?

yes. for a 170cm doll hieght.
sorry we only sell a whole doll
Please find the list of 6YEdoll Global authorised dealers/resellers here http://www.6yedollglobal.com/buy.html
https://www.SexySexDoll.com - Quality Global Retailer| TDF approved vendor | Free worldwide shipping
https://6yedoll.eu - European site (Free 1 Year Fixing Service in Europe, proficient in French, English, German)
http://dolldesire.com/ - BCD (Jeff) | doll specialist & Guru | TDF approved vendor
https://monamourtoujours.com/ USA | TDF approved vendor

6YE doll ONLY supplies our Premium products to our authorised resellers. All products being sold by other channels are either scam dolls or the old version.

User avatar
himypeace
Active Member
Active Member
Posts: 141
Joined: Mon Feb 04, 2013 9:09 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by himypeace »

wel549 wrote:
6YeDoll wrote:
wel549 wrote:is it possible to just get the skeleton? i would like to try some animetronics.
you mean buy the skeleton only without TPE flesh?

yes. for a 170cm doll hieght.

Actually you can buy the 170cm doll..and take the flesh apart... :haha4:
Not interesting in real girl ;)
@Vancouver, B.C.

---Doll currently owned----
JM: 80cm Elf (2012 edition), 75cm (2014 edition), 80cm elf (2015 edition), 110cm (2015 edition), 117cm (2015 edition), 120cm(2015 edition) 130cm (2015 edition), 142cm (2015 edition)
Sanhui - 158cm (2017 edition)
DS - 168cm(2018 edition)

Others: Can't post here ;(

---Previously owned doll---
DS - 145cm (2013 edition)
Candy girl - 136cm (2012 edition)
Sanhui -120cm (2015 edition)

User avatar
Meso
Doll Mentor
Doll Mentor
Posts: 1095
Joined: Sat Nov 26, 2011 9:40 am
Location: Texas, USA
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by Meso »

Dr. Dillinger, I agree with you in principle, but if a manufacturer is going to address the major complaints / concerns of the consumers, then why wouldn't they explore the fragility of doll wrists and fingers along with the antiquated major joint connections? Why not go full bore, modernize the wrists/fingers along with what 6YE is doing, and become the leader in the $4000 & below doll industry? I submit two possibilities:
1. I don't think there's any debate still going on about hinged wrists vs wires, but the jury's still out on beefed up wire fingers vs hinged finger joints. Jeff, from BCD, is pretty adamant (I would think with advice from Samara 78) against current finger joint development (as in actual joints). Is the technology available for improvement? Absolutely.
2. Gonna open the back curtain here. Doll manufacturer to wire manufacturer:
"We need enough wire at such-n-such diameter at X amount of meters (or feet), and we need it for the next X years. "
Wire Mfr to Doll Mfr: "OK, we can do that. Sign this contract for the X amount of years, and we'll supply you with what you want at the the price we agreed upon in negotiations."

I'm thinking with the commitment 6JY has made to truly advancing doll manufacturing, the latter is in place (they'll never say, because if it's true, it'd be disastrous to them to admit it). So everyone, the race is on, and perhaps the first Mfr to come to the end of it's wire contract may be able to patent and modernize the wrists & fingers.
Keep your chin up, and keep the pressure on to improve our doll experience.
I think the world of all y'all!!
http://www.dollalbum.com/dollgallery/in ... ?cat=13492
Dolls are like motorcycles: I wish I'd kept every one I ever rode.
Past Dolls:
Candy8Teen Taffy doll B-cup, tan. MLD D-cup, tan. AVSexToy 100cm D-cup, tan. YL148 D-cup, tan. JY166 Bambi body builder, natural, JY135 flat, tan, WM144 L-Cup, tan, WM140 A-cup, tan.
Current Dolls:
Mia: OR141 ExtraSoft, F-Cup, tan.
Vampirella & Cowgirl: Phicen

User avatar
Dr Dollinger
Doll Mentor
Doll Mentor
Posts: 1221
Joined: Tue Dec 27, 2016 8:25 pm
Location: From behind the curtain
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by Dr Dollinger »

Hi Meso,

I'm absolutely not against any further development.
I'm also not really satisfied with only wired wrists solutions (especially when there is no rotation on the wrist)
But, speaking from the experience with my 6YE doll. I did not have any injuries with fingers, dislocated wires or broken wrists. Hands feeling still great!
Even Jeff is saying, that the major issues on the hands come from dislocated wires of the hinge.
On only wired wrists these issues never occur. So it depends only on the quality of the wires and the connection between wires and wrists.
Best solution for me would be a ball joint design for the wrist, which can hold the weight of the doll, good quality wires for the fingers with something like a small cap on the end, that protects from poking through the skin.
Im pretty sure 6YE is aware of that and they are still working on a new design with a ball-joint in the wrist.

On new jinsan dolls the wires for the fingers are so massive, that i couldn't even imagine how they should break.
If a finger joint break, you may not even use the finger anymore. Wires are far more flexible.
Finger-joints would raise the costs immensely. The technical implementation isn't so easy
viewtopic.php?f=87&t=86798&hilit=Finger+joint&start=0

From a technical view, joints which feel like bones, sounds very tempting - that's for sure...
Maybe the customer could decide which design he likes to choose. Normal - with wires. Or premium - with joints in the fingers. What costs more money
Image
Jazzmine______________________________________________Demona____________________________Druuna

Roona
_

User avatar
stacy718
Photographer
Photographer
Posts: 5832
Joined: Tue Dec 07, 2004 12:00 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by stacy718 »

Have you updated the wrists to allow them to rotate yet?


Cute dolls.

User avatar
bob7892
Doll Advisor
Doll Advisor
Posts: 844
Joined: Mon Feb 04, 2013 8:04 am
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by bob7892 »

I already own a high end silicone doll with the hinged joint system . SOME of the problems I have experienced are tears in the skin caused by the hinge itself , also pokes in the skin were the bolts heads have worn though .
I am hoping that the new ball joint , on the 6ye skeleton will also improve on this , thus adding to the longevity of our dolls :D :D :D :D
As for the fingers , the addition off end caps on the finger wires , would go a long way to improving the hands , and would not cost that much to implement .
I am not sure but I think I read some where that 6ye are using thicker wires for the fingers now.
And maybe the addition of wires for the toes might also help :D :D :D :D :D
Welcome to Future , Just take a look inside .
We've got every thing you need , including Sex Android's
Come on Boys , Just take a look , Every things Unique
If You want Real Sexy Dolls , Just cum and take a peak
In The Future ,In The Future
So Welcome !!!!!!!!!
WELCOME !!!!!! To The FUTURE !!!!!!!!!!

My Girls and their stories https://www.dollforum.com/forum/viewtop ... 13&t=87890

My first doll Latasha is on a secret mission to find the perfect body !!!!!

Kireina's song https://youtu.be/sxSw20Gmubs

Some one said , Guys have girlfriends , because they have not found their perfect doll :D :D :D :D
Well I have :D :D :D :D Her name Is Kireina AND she's a 6ye :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D

I am me , and just me , and always will be me , and I don't deserve to be put in a box :evil: nobody does .bob7892

User avatar
Dr Dollinger
Doll Mentor
Doll Mentor
Posts: 1221
Joined: Tue Dec 27, 2016 8:25 pm
Location: From behind the curtain
Contact:

Re: New 6YE Doll Skeleton (Patented ball-joint design)

Post by Dr Dollinger »

stacy718 wrote:Have you updated the wrists to allow them to rotate yet?


Cute dolls.
Thanks Stacy :)

No, my 6YE doll Jazzmine is outdated a bit..
She has the old wrist design, with wrist rotation. That makes her hands some floppy.. But i like that
New design isn't floppy anymore. But rotation is gone

So, my doll is very special :D
Image
Jazzmine______________________________________________Demona____________________________Druuna

Roona
_

Post Reply

INFORMATIONS