Adapter to fit a Sanhui head on a Doll Sweet body?
Adapter to fit a Sanhui head on a Doll Sweet body?
WM 156-C #70 + #45
SM doll which can't be discussed.
---------------------------------------
Formerly:
Hikari/Allison/Heather - Racyme 158 #88/74/JY128
Rhiannon - Sanhui Elfie 118
Hannah - Sanhui 145 Face 2
Sayuri - DS 145 - Nina
---------------------------------------
It doesn't take all kinds. We just have all kinds.
Re: Adapter to fit a Sanhui head on a Doll Sweet body?
The Sanhui head has a female M10( 10mm) thread that goes into the head, not sure if depth may vary but it should be about 30mm give or take a bit.
The DS neckpost has an outer diameter of ~10-10.5mm and a height of ~39mm.
If you are skilled using tools AND do not mind risking/inflicting damage to both your body and your head, here is what you can do to make this work:
Get an M10x1.5 die cutting tool such as this: http://www.ebay.com/itm/HSS-M10-x-1-50- ... 0992169714
Note you will need a holding handle for it as well.
Use that on the DS neckpost to carve an outer M10 thread onto it ... if you manage, the neckpost will still work for DS heads, if you do it wrong it will break somewhere and you will need to replace the whole neck assembly which is no easy task.
Get a drill and/or an M10 thread cutter and make sure the threading into the Sanhui head is at least 40mm deep.
Doing so will likely make a hole into the inner head shell and may result in the screw protruding into the back of the mouth of an oral capable head, destroying that capability.
So, to sum it up: you are very likely to destroy either or both of your DS neck assembly and SH head inside ... but ... if ... big IF ... you manage to do both task right and do not use an oral capable head or do not mind loosing the oral capability then you could end up with the combo you want.
You may also note that in terms of proportions you may actually need a Sanhui 16x series head for a DS 145 body.
Kind regards.
艶( Tsuya) - Orient Industry Izumi head on Jewel Real Taste 146(L) body
Tinúviel - EXDOLL Samantha head on Orient Industry Jewel Candy Girl( Jewel 2) body
Yuzuki, Tsuya & friends
Re: Adapter to fit a Sanhui head on a Doll Sweet body?
WM 156-C #70 + #45
SM doll which can't be discussed.
---------------------------------------
Formerly:
Hikari/Allison/Heather - Racyme 158 #88/74/JY128
Rhiannon - Sanhui Elfie 118
Hannah - Sanhui 145 Face 2
Sayuri - DS 145 - Nina
---------------------------------------
It doesn't take all kinds. We just have all kinds.
- TPEsnack
- Ex-Member
- Posts: 219
- Joined: Sun Sep 17, 2017 4:56 am
- Location: Eventually the Laotian countryside. Or Havana
Re: Adapter to fit a Sanhui head on a Doll Sweet body?
Thanks from me too. I look forward to finding more problem-solving posts.joninin wrote:Wow! Thanks for the detailed instructions!
-
- Doll Mentor
- Posts: 1152
- Joined: Tue Aug 18, 2015 1:44 pm
- Location: with Nele, Kiko, Mamamba and Ms. StrangeLove in cyba's space
- Contact:
Re: Adapter to fit a Sanhui head on a Doll Sweet body?
They look 3D-printed to me, don't know how well they are made...
But I'll give it a try when I start building a hybrid (or cyborg) based on an ExLite as soon as she arrives.
Yet here I am, dreaming about reality again...
Re: Adapter to fit a Sanhui head on a Doll Sweet body?
GirlsGang
Someone who thinks logically is a nice contrast to the real world.
The girls:
Leora & Leonie (DS145)
Ebony & Ivory (Smart Dolls, 1/3)
Meet the Gang (1/6)
REVIEW:
AI S+ Fay/Sonia 4woods EU