Mold your own Vagina
Mold your own Vagina
Evidently we had a photo go missing but here are the first couple stages of making the mold to reproduce my own insert.
What do you think, I have an encased insert (which was pretty beat up with multiple splits, tears, wear I think, and generally not in the best of shape) in polyurethane plastic or am I gonna get the three pieces of the mold apart and be able to pour in some platinum silicone and get a fresh new insert.
Re: Mold your own Vagina
Highly looking forward to the result of your experiment.
http://dullahanprojects.com/plaisonar/
Works with all HTML5-compatible phones. Just press the pink button and shake your phone!
App Discussion: http://dollforum.com/forum/viewtopic.ph ... 7&start=45
- HotDiggityDoll
- Doll Elder
- Posts: 2581
- Joined: Mon Jun 13, 2005 12:00 am
- Contact:
- abracadabra
- Doll Advisor
- Posts: 892
- Joined: Sat Jun 11, 2016 5:56 am
- Location: anywhere within reason
- Contact:
Re: Mold your own Vagina
"f#ck the G-ride, I want the machines that are making em."
- abracadabra
- Doll Advisor
- Posts: 892
- Joined: Sat Jun 11, 2016 5:56 am
- Location: anywhere within reason
- Contact:
Re: Mold your own Vagina
I ncreased the hole diameter to half inch
"f#ck the G-ride, I want the machines that are making em."
Re: Mold your own Vagina
I have plat sil gel 10. I also have the smiths deadener/slackener. I am thinking the first one I just want to go 1:1:0.5 and see what that does. I don't have a lot of silicone, I maybe only have 2-3 tries on the current inventory of material.
That's the plan, if anyone has any suggestions or advice......?
- HotDiggityDoll
- Doll Elder
- Posts: 2581
- Joined: Mon Jun 13, 2005 12:00 am
- Contact:
Re: Mold your own Vagina
So is that just polyurethane finish?
How long did it take to cure?
edit: probably polyurethane casing resin?
- pygmalion2
- Doll Mentor
- Posts: 1955
- Joined: Fri Apr 16, 2004 12:00 am
- Contact:
Re: Mold your own Vagina
Oddly enough I am doing the same recasting but using hydrocal 30.
Re: Mold your own Vagina
I did run a sample with 50 % deadened, not enough, it is to stiff. It was fun to play with the coloring and flocking, wow the color really does go a loooooooong way.
I don't feel like another test pour at 100, 150, or 200. Just wasting on hand material and I can't say for sure how representative it is as just a medallion. Scale says it is gonna start getting sticky at and more than 100%. Think I will rock one out at 100% deadend and go to bed and let it cook overnight.
Re: Mold your own Vagina
I also changed my mind from the original thought of deadening it to 100% and went with 140%. With the slight screwing around with coloring and mold assy and the material (probably my manipulation of it and lack of haste) not being that pourable, and my pour hole needs to be opened up a little.
Well, it all resulted in an incomplete mold, I tried helping/stuffing it in at the end as it was curing on me which is why it looks like the middle didn't fill but the bottom did.. The silicone is also a bit sticky. You can powder it and it does lose that tack but it comes right back after being washed off (obviously). Acetone wipe does nothing beneficial either.
So step 1 is kind of in the books at this point in time. I am hanging it up and cleaning up for a little bit until we get some different materials in the house. There are less tacky and softer materials with a much longer working time which will be here in an week.
I learned some things and had some revelations (you can always premix the color tint rather than trying to mix it in the materials and get it right when you are in a hurry). And I had fun! Although I made quite the mess of the kitchen.
Back to this in a couple weeks with different materials and some more time on my hands.
I don't really know if I need to make a vacuum degasser or not for an 0020 series silicone, I probably will fab one but I wont have the patience to complete that before getting some new material and throwing it in the mold.