Body 7 hip joint repair
Body 7 hip joint repair
A week ago I had to do a major repair on Tanita’s skeleton (Body 7/ 5months old). The disaster started with a creaky noise that came from her right hip joint a couple of weeks ago.
Later I noticed that I could pull the leg away from the torso, it was only held by the silicone! I can tell you that I was truly shattered! What happened here?
Anyone who is interested in the surgery can take a look at her website http://www.tanita.tv – go to the “about me” page – you will find some pics and a small statement there.
Believe me the worst thing about it was the fear of the first deep cut into her beautiful body after that everything else was easy going!
But finally she’s fine and I’m able to sleep through again.
Max P(ain)
- Mike Johnson
- Ex-Member
- Posts: 969
- Joined: Tue Jul 17, 2001 12:00 am
- Location: Jazzi and Mysti's Dollhouse
- Contact:
This and finger problems are the most common durability issues current owners have.
Slade has done this repair many times, I'm glad to see that it is not impossible to do by a doll owner.
http://www.dollalbum.com/gallery/Red-and-Blue/abw
http://www.dollalbum.com/gallery/album200/aaa
- full-batman
- Active Poster
- Posts: 94
- Joined: Sun Mar 23, 2003 12:00 am
- Contact:
I think it has something to do with a car mentality. Spend money on new car, and we expect it to last. Spend money on new doll, and you really only get a very delicate piece of art. It's difficult for new doll owners to experience the can-do's and the can't-do's after spending all that money.
- red_dragon
- Doll Advisor
- Posts: 613
- Joined: Wed Feb 12, 2003 12:00 am
- Location: The city on the edge of forever.
- Contact:
-
- Ex-Member
- Posts: 5070
- Joined: Sat Aug 31, 2002 12:00 am
- Location: PA
- George66
- Doll Advisor
- Posts: 870
- Joined: Sat Jul 05, 2003 12:00 am
- Location: Southampton England
- Contact:
Brilliant illustrations. How difficult was it to cut so deeply into the silicone with that yellow craft knife?Max P wrote: Anyone who is interested in the surgery can take a look at her website http://www.tanita.tv - go to the "about me" page - you will find some pics and a small statement there.
It wasn't done up tightly enough either was it? You shouldn't need locking glue on nuts holding a doll skeleton together.Statement(by Max): The nut came off the bolt because it wasn't locked with glue.
This isn't very encouraging.
I can well imagine. How did you know where to cut, and how did you hold the cut closed when you glued it back? I can see some big staples. How do you fix them? Do they leave marks when you take them out?Believe me the worst thing about it was the fear of the first deep cut into her beautiful body.
Love your doll. She looks gorgeous. I'm going for Face 4 too, so that's encouraging.
Does this mean that Abyss make a habit of failing to tighten bolts? If so I should check out the skeleton before I let them pour shouldn't I? It will be a lot easier than trying to tighten loose bolts after, won't it?Mike Kelly wrote:I've heard of this happening on other dolls too. Slade has done this repair many times:
That's true but then with help from the TDF it seems everything can be put right.full-batman wrote: It's a killer when something goes wrong with the doll. We spend all this money and then something goes haywire like that. "shattered" is indeed the correct word!
I've given up "expecting" or even hoping new cars to "last". I've had endless very large bills with my Porsche, and certainly enough to buy a Realdoll. Last month (why is everything happening to me in the Fall of 2003) I very cleverly managed to scrape the nearside along the garage wall. Cost of repair: $1500.I think it has something to do with a car mentality. Spend money on new car, and we expect it to last.
-
- Ex-Member
- Posts: 5070
- Joined: Sat Aug 31, 2002 12:00 am
- Location: PA
- George66
- Doll Advisor
- Posts: 870
- Joined: Sat Jul 05, 2003 12:00 am
- Location: Southampton England
- Contact:
They do, but we shouldn't really need them should we? Max's nut could only have been hand-tight. Someone clearly forgot to tighten it, didn't they?keithallen wrote:Maybe for future repairs like this, one should concider Nylock nuts, they hold themselves in place.
Just a thought.
Or do the nuts have to be left loose to allow the joints to move? If so then they do need to be locked, either by glue or a pinch-nut or a Nylock nut.
I guess from what Max has said they are supposed to be glued. I guess he got that from Matt. Perhaps I should ask for Nylock nuts.
You CAN'T forget to glue them. I'm still wondering if I ought to check my skeleton, or perhaps just ask for a photo of it, to see that Nylock nuts have been fitted. The last thing one wants is to have to go through what Max has gone through.
That is the easiest part if you use a brand-new blade.How difficult was it to cut so deeply into the silicone with that yellow craft knife?
Wrong! The statement says: A thread bolt, that was not locked with glue securely, came off his location - There is no nut on this bolt, he is screwed directly into the “thigh bone „.The upper end with the thread in is made of aluminium. You need locking glue in this case otherwise the bolt will come off after a couple of leg movements (rotation in stretched out position). The joint is not constructed to do this (unnatural) movement!! Each doll owner should know that to prevent damage.Quote:
Statement(by Max): The nut came off the bolt because it wasn't locked with glue.It wasn't done up tightly enough either was it? You shouldn't need locking glue on nuts holding a doll skeleton together.
I mailed Matt two weeks ago and told him what happened – I attached some pics but don’t got a response yet.
Matt gave me the instructions, the cut was made exactly along the seam.How did you know where to cut
The self-made staples left some very small marks but hardly noticeable.I can see some big staples. How do you fix them? Do they leave marks when you take them out?
And finally:
George, please don’t drink and drive!!(Guiness!)I very cleverly managed to scrape the nearside along the garage wall. Cost of repair: $1500.
Keithallen – Nylock nuts are used on each moveable part of all joints.
Max P
- George66
- Doll Advisor
- Posts: 870
- Joined: Sat Jul 05, 2003 12:00 am
- Location: Southampton England
- Contact:
Thanks Max. If this is a common problem as Mike has suggested, then my solution is that Matt puts a dab of bright red paint on these joints after the glue has been applied, so that customers can receive photos of the skeletons to reassure them that no mistakes have been made.Max P wrote: There is no nut on this bolt, it is screwed directly into the “thigh bone „.The upper end with the thread in is made of aluminium. You need locking glue in this case otherwise the bolt will come out
Is there room for a pinch-nut to lock the bolt instead of glue?
I've sent Matt an email and will be ringing Debra on Monday, but rather expect to hear that it isn't a common problem, although I might still ask for a photo anyway.
- George66
- Doll Advisor
- Posts: 870
- Joined: Sat Jul 05, 2003 12:00 am
- Location: Southampton England
- Contact:
But was it because of a fault in the factory where Ron forgot to apply the glue. Ron won't be happy if we don't make this point clear, will he? He's the one who's on the hook for this, isn't he?Mike Kelly wrote:I've heard of this happening on other dolls too.
This and finger problems are the most common durability issues current owners have.
Slade has done this repair many times, I'm glad to see that it is not impossible to do by a doll owner.
Max's charge that it was a factory fault and that Matt seems to have admitted it, is quite serious isn't it?
When I spoke to Debra Thursday she didn't seem to know anything about it, so it looks as if I might have to speak to Ron himself, but I would like to make sure that I've got the story right, first.