So in looking at everyones advice in a better approach to the injections, would be:
You combine this with the grease gun (new) pump, and think you have a winner! That way you have a good "Pump" designed allready to handle a thick fluid allready, you have the steel "jumbo" needle to inject, with its paired AIR needle to depressurize .Aberdare wrote:SCK:
a piece of Steel Brake Tubing (3/16" I.D.), that has had one end sharpened to a needle point on a grinder, and fitted to a suction gun -- VOILA - A slime injector that would be considerable less invasive than a large incision. To allow air to escape while filling, a 2nd piece of steel tubing inserted into the cavity alongside the filling Tube.
Abe
Interesting thought to this dual needle concept : (to those mechanics/Air conditioning techs)
BY using a dual Needle system, you do have the ability to add both slime, and allow air to escape in same volume, OR NOT! As CF was indicating, it would be possible to combine both add weight- feel, or simply Pressure for volume, by keeping some amount of air in the breast. Of course im not sure how that would behave as she is laid down, or stood up, (air bubble traveling thru breast might be weird to watch or feel) These are uncharted waters!!!
Only SC Kline has the real deal there.
This does give me pause to think this is very very real idea to test.... I JUST ordered a WM161// 91cm Breast. Should have her in 2 weeks.
I might have the gumption to build the Tool- and give it a try!