They are hand punched human hair - one by one - not bad after 3 years of play. eh!?Zebo wrote:Pyg, is that a hand punched blondie or glued?? Looks Amazing!!pygmalion2 wrote:With the realdolls, there has been a huge change in the quality of the silicone I would guess around the time of the
duracast hands/feet. The softness is soft enough that you can 'dent' the silicone. There is a mild texture and yet
silky smoothness that needs very little powdering. The softness is below shore 0010. I have not been able
to duplicate this softness even when adding slacker to the 0010 smooth-on silicone. I have had over 10 silicone dolls before
Katy - body D (delivered nov 2014) and this is IMHO the best silicone no contest.
The vag insert, I glue in with a thin amount of adhesive so that their is no gap. When the insert tears and needs replacing,
I will be able to cut the silicone adhesive bead and remove/replace the insert. I am not interested in the Kama sutra positions
just simply missionary sex where my body D is just too good to describe. The articulated spine, the smoothness of motion of the
joints, the beauty of the face,... I forget at times this is only a doll. I also have two dolls from another company that makes
these hyper realistic dolls a 1H and a 2D, several earlier model realdolls but for sex, the body D is the one.
Need some Information
Moderator: TJ_Foxx
- pygmalion2
- Doll Mentor
- Posts: 1955
- Joined: Fri Apr 16, 2004 12:00 am
- Contact:
Re: Need some Information
Re: Need some Information
Re: Need some Information
Totally impressed pyg, very nice I love the blondies.....pygmalion2 wrote:They are hand punched human hair - one by one - not bad after 3 years of play. eh!?Zebo wrote:Pyg, is that a hand punched blondie or glued?? Looks Amazing!!pygmalion2 wrote:With the realdolls, there has been a huge change in the quality of the silicone I would guess around the time of the
duracast hands/feet. The softness is soft enough that you can 'dent' the silicone. There is a mild texture and yet
silky smoothness that needs very little powdering. The softness is below shore 0010. I have not been able
to duplicate this softness even when adding slacker to the 0010 smooth-on silicone. I have had over 10 silicone dolls before
Katy - body D (delivered nov 2014) and this is IMHO the best silicone no contest.
The vag insert, I glue in with a thin amount of adhesive so that their is no gap. When the insert tears and needs replacing,
I will be able to cut the silicone adhesive bead and remove/replace the insert. I am not interested in the Kama sutra positions
just simply missionary sex where my body D is just too good to describe. The articulated spine, the smoothness of motion of the
joints, the beauty of the face,... I forget at times this is only a doll. I also have two dolls from another company that makes
these hyper realistic dolls a 1H and a 2D, several earlier model realdolls but for sex, the body D is the one.
Re: Need some Information
"One thing which makes me wonder, is that Abyss says the insert diameter is 2''. That's about 50 mm compared to 15mm TPE inserts.
Do they really have a hole with 50mm or is the hole oval?"
Maybe this mean outside diameter at some point (look photo at Abyss accessories). I have not possible measure it (now)
I can tell that it is very suitable for almost all cock. Best of the world.
Re: Need some Information
Thanks!apn12 wrote:Barbydoll wrote:
"One thing which makes me wonder, is that Abyss says the insert diameter is 2''. That's about 50 mm compared to 15mm TPE inserts.
Do they really have a hole with 50mm or is the hole oval?"
Maybe this mean outside diameter at some point (look photo at Abyss accessories). I have not possible measure it (now)
I can tell that it is very suitable for almost all cock. Best of the world.
Yes from the pics there must be something wrong with 2''. Most TPE inserts are about 2'' on the outside (50-60mm), this would mean you could throw the TPE insert in the realdoll insert amlost without streching it
https://secure.realdoll.com/female-real ... ck-insert/The inside dimension is 7" deep x 2" in diameter, however stretches to about 12" deep and 4" in diameter. (No cross section images are available.)
But pictures show something like this:
Maybe Abyss meant the inside diameter of the doll itself (= outside diameter 2" of the insert like you said).
Re: Need some Information
I can measure insert tomorrow.
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact:
Re: Need some Information
Re: Need some Information
I don't want to spam gator048's thread, but delivery time might be interesting, too.
I got told today delivery time is estimated to 12 weeks (for the D body order; but I'm not sure If the EU vendor asked Abyss).
Others talk about 27 weeks for a doll order.
http://clubrealdoll.com/community/threa ... post-32859
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact:
Re: Need some Information
Re: Need some Information
Re: Need some Information
This is tight to push insert (needs lubrication).
Re: Need some Information
Re: Need some Information
Thanks for being honest, I know the dolls are a piece of art and I don't want worse quality for quicker delivery.Zebo wrote:Right now, production time on all dolls is at 27weeks to delivery. They are working to bring that down to 20weeks, but I don't see that happening for awhile. However, for those of us with little patience and a lot of coin can get the express service (6-8 weeks) on the doll for an additional $1500. So you have a choice, Barbydoll
Express as German customer would mean I would have to spend about $11,000 for my first doll from Abyss and I have never seen one in real life.
Thanks apn12, too. This is really first class service here. She has a nice smile. Which skin color does your doll have?
@pygmalion2
Do you glue in the insert to prevent the doll itself from tearing in the insert area?
I know there are dolls of other manufacturers which suffer from production failure in this area.
For example I spent more than my doll cost for equipment to 3D design any insert I can imagine with 3D CAD, print it with my 3D printer and cast it in metal an produce my own inserts then for $5 material cost. But TPE and TPR may not be used with silicone.
Would it help to use the doll like an inbuilt even if it has an insert?
Re: Need some Information
Skin tone is tanned. I can recommend.