3M 94 Primer – Application as a TPE Glue / Cold Weld
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
take out your frustrations on it
This is why some of us went into the trades in the first place, to be able to belt the stuffing out of stuff and make something useful
- DrDemento789
- Doll Mentor
- Posts: 1846
- Joined: Tue Apr 14, 2020 1:09 pm
- Contact:
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
I'm actually kind of impressed that the repair lasted over a month before it started peeling away on one side. I touched it up today so it should be dry in a few days. The only other issue is it's kind of peeling a bit on the lower part of the vagina I had to touch that up as well probably from the cowgirl position. Still this stuff is very good and would fully recommend it for repairs because it lasted longer than I expected on a stress area.DrDemento789 wrote:I'm actually glad somebody mentioned the vaganus because I've been working the last week on Erica to repair hersGotDolls wrote:Is this stuff any use for fixing a doll's vaganus - where the TPE between her two crotch holes has split?
Here's what I had to work with it wasn't much. The can is a butane canister about 1.5 inch in diameter. The bar for the anus is from a strainer basket wrench measuring 3/8 of an inch.
And here is the result after days of letting it fill and dry.
unfortunately when I took the butane canister out the bottom of the vagina kind of sagged a bit
closed it doesn't look too terrible but I'll probably end up putting a little bit more paste at the base of the entrance and build it up some more. Probably reinforce the top as well you can see some peeling from there as well.
Total process took about 5 oz of total paste and like I said over a week of pasting and drying.
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Learning to use this stuff is a bit like learning to weld, takes a bit of practice to get it perfect
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
If that's the case, might have to give this stuff a try should the need arise. I mean shoot, taught myself to stick weld in an afternoon. Didn't have to call the fire department or anything!seagull wrote:That is an extraordinary result considering what you had to repair
Learning to use this stuff is a bit like learning to weld, takes a bit of practice to get it perfect
- muesky6969
- Doll Mentor
- Posts: 1315
- Joined: Mon Aug 10, 2020 8:59 pm
- Contact:
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
If you decide you want to sculpt the vaginal area on the outside, let us know. One of us will be more then happy to help you with that. The other option, is if you find a masturbator, similar in color and good detailing, you could graft that on the outside of the vagina. Just a thought.
Good work, yeah you!!!
Morghana's Doll Emporium Thread
viewtopic.php?f=229&t=145649[/i]
Check out “The TPE DOLL EMPORIUM”: (Featuring: Z-Dollman & Morghana the Doll Witch)!!!
https://www.youtube.com/channel/UCybCey ... AgqYdgmSXg
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
- DrDemento789
- Doll Mentor
- Posts: 1846
- Joined: Tue Apr 14, 2020 1:09 pm
- Contact:
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Can't believe that was almost 6 months ago
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Where is, Wheezer anyway? Hasn't posted any updates in a while.seagull wrote:Don't beat yourself up too much DrDemento789, Indigo's CWA was relatively new and Wheezer first posted about 3M paste back in August in the year of hell
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
- DrDemento789
- Doll Mentor
- Posts: 1846
- Joined: Tue Apr 14, 2020 1:09 pm
- Contact:
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Yeah you're right this is basically new technology for those who could not afford indigo's version. In fact despite this whole situation her body is holding up rather well except for a couple of dry patchy spots. Here's one of her latest photosseagull wrote:Don't beat yourself up too much DrDemento789, Indigo's CWA was relatively new and Wheezer first posted about 3M paste back in August in the year of hell
Only way I can post her she suffers from child face.
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
Thanks.
Presidential Commission on Obscenity and Pornography
Does she...or doesn't she? (A slogan used by Clairol)
My dolls
Reminder to self: Still more work to do on my albums.
First photo shoot of Sandra, a Sanhui 145 cm lady doll.
[thumb]http://dollforum.com/forum/download/file.php?id=196256&t=1[/thumb]
Fun photos of my JM 110cm, Angie.
http://dollforum.com/forum/viewtopic.php?f=196&t=74121
- DrDemento789
- Doll Mentor
- Posts: 1846
- Joined: Tue Apr 14, 2020 1:09 pm
- Contact:
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
No more banging on the office chair for her!
Re: 3M 94 Primer – Application as a TPE Glue / Cold Weld
You did what on an office chair?
You deserve a medal and a reprimand for attempting it