New Hannah Harper Doll...
- Mindyflyer
- Senior Member
- Posts: 209
- Joined: Sun Jun 27, 2010 2:16 am
- Location: Wichita, KS
- Contact:
New Hannah Harper Doll...
Re: New Hannah Harper Doll...
It involves putting a small dab of 5 minute epoxy on the inside of the arm socket in a triangular pattern right at the top of the socket. When cured, they act like little tabs, thereby holding the ball in the socket better. Seems to work pretty well. See the pic for a better understanding.
I would rough up the three areas where the epoxy goes slightly first with fine sandpaper, then clean them with alcohol for better adhesion. Also, try to keep the arm socket perpendicular to the floor until the epoxy cures, otherwise it will run into the socket.
Hope it helps. BTW, congrats; Hannah's one of my faves. Good luck with her.
-
- Contributing Poster
- Posts: 20
- Joined: Fri Dec 30, 2005 12:00 am
- Location: The Netherlands
- Contact:
Re: New Hannah Harper Doll...
-
- Contributing Poster
- Posts: 20
- Joined: Fri Dec 30, 2005 12:00 am
- Location: The Netherlands
- Contact:
Re: New Hannah Harper Doll...
I hadn't seen your post before posting my previous message. Thanks for the advice. This is definitely worth a try..
Re: New Hannah Harper Doll...
Good to hear from you - Mindflyer - we all missed you -
Excellent idea - AGL - i have never really had any good luck with these issues which are very common on these NANMA/ CONBO made dolls - there are two types the older with ridges and this type as shown by AGL pics of "gasp" Hannah Harper - the later type as seen in these pics are are a press fit by the factory more of a friction type instal VS the older style ridges pressed onto other ridges -
I would follow AGL advice - Mindflyer - as ole AGL has proven very much successfull in his approach to repairs - i have late followed his detailed repairs with much success - thanks AGL -
I have had some success with just pressing the arm socket back into place with a little gusto - but - only with the doll fully deflated and no air left in the arms to prevent any damage - while not permament repair it allows for a quick fix without use of glues - but - yes at some time it will pop out again
Good luck - Mindflyer - always great to hear from you again & best of luck with your new Hannah Harper doll -
Happy Trails
- Mindyflyer
- Senior Member
- Posts: 209
- Joined: Sun Jun 27, 2010 2:16 am
- Location: Wichita, KS
- Contact:
Re: New Hannah Harper Doll...
Re: New Hannah Harper Doll...
Yup - Mindflyer - thats the problem with just using the friction method - it does hold with my girls for some time - but - after a bit of clear air turbulance - - they tend to pop back out -
Not sure why on some of the NANMA made dolls the arms never come off - where on some others such as my Gina Lynn its a constant problem -
Any way its always great to see you back in action - and give a shout out on the 'unicom' anytime your over head -
Happy Trails
Re: New Hannah Harper Doll...
Hannah's ankles are too weak to stand unless I really pressurize her. I agree with those who wrote that she is more cuddly when not as tightly inflated. Her best feature is that angelic face, and those nipples are a real turn-on to rub. Her 'openings' are a nice material, but rather hard. and difficult to penetrate. I wonder if I dare warm them with a blow dryer just before use. Meanwhile, they are fun to rub through whatever she is wearing.
- genesis218
- Doll Advisor
- Posts: 744
- Joined: Tue Mar 01, 2005 12:00 am
- Contact:
Re: New Hannah Harper Doll...
- haremlover
- Doll Visionary
- Posts: 16238
- Joined: Tue May 26, 2009 12:00 am
- Location: UK and South of France
- Contact:
Re: New Hannah Harper Doll...
The secret to getting her standing is to buy boots for her to wear and possibly cardboard reinforcement inside those . . .
The problem with arms popping off and of the entry being tight is firstly overinflation and secondly one needs to wipe lubrication (I use saliva) onto the relevant area. Overinflation makes the PVC outer joint expand.
However, having damaged her, a recent post describes using glue to restore the bite of the joint to stop it coming apart but also, I enjoy action whilst holding the shoulders or you can grip the bum, enclosing the arms so stopping their desire to be awkward . . .
Best wishes
Harem
Chloé's book
is available from The-Doll-House
- - - -
Here's Coverdoll Yolanda
- - - -
Reviews for:
-DS-OR-JY-SY-Jarliet-Vivid-SM-SE-ZOne-JM-Sino-Sanhui-Pipedream--XY-WM-Elsa Babe-SM Silicone Siliko-XYcolo-Starpery-Elsa Babe-FutureDoll-Zelex-Irontech-FJ Doll
- - - -
YouTube Doll Review Channel
-https://www.youtube.com/@sexdoll-reviews-
Re: New Hannah Harper Doll...
- Barbarous
- Doll Advisor
- Posts: 753
- Joined: Fri Apr 20, 2012 11:30 pm
- Location: West of the Rockies
- Contact:
Re: New Hannah Harper Doll...
- netwit
- Platinum Member
- Posts: 7619
- Joined: Wed May 11, 2011 8:56 am
- Location: Ho, Ho, Ho-ing around
- Contact:
Re: New Hannah Harper Doll...
- Barbarous
- Doll Advisor
- Posts: 753
- Joined: Fri Apr 20, 2012 11:30 pm
- Location: West of the Rockies
- Contact: