air pockets in bodies for modifications
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
air pockets in bodies for modifications
so my question is this , knowing now that air injection can be done , is or will ordoll create other hollow area's in dolls bodies that would allow more body modifications ???
In another words well placed hollow area's in the butt area could be done that would allow air injection of equal amounts and will be able to have a larger butt area for people who like that sort of thing! the hollow area would have to ( i imagine , be a alsmost full butt cheek area on each side to allow the cheeck to inflate and look correctly ( as the breast do in another words !) .
I actually think this would be a smart move for the ordoll company . offering something other doll companies aren't offering .
This may also be possible for thigh area's .
all of which will also make the doll a little lighter ( having hollow area's and also make it possible to modify the dolls for customers using air injection instead of using more doll material making area's bigger !
-
- Apprentice
- Posts: 10
- Joined: Wed Jul 08, 2015 1:50 am
- Location: China
Re: air pockets in bodies for modifications
Re: air pockets in bodies for modifications
Right now TPE feels great for soft touches, But if you poke it with your finger, your finger goes in too far (skin is too soft, too elastic), but if you put your head on it, you feel its too hard (Bulk is too hard)
The human body is not just one material.. We have a tough skin covering nice soft fat and organs.. Held in place by strands of muscle that has a limited elastic range keeping anything from being moved/stretched too far. Ie we are soft but not nearly as elastic as TPE.\
I do find it kind of funny however this means I would be asking for a material with *lower* elastic properties for realism sake.
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: air pockets in bodies for modifications
Their are some ass men who like bigger butts , this way the doll could be modified from normal body to make a larger butt !
Re: air pockets in bodies for modifications
this would be the thing to sway me away from that gorgeous jcup torso & into a full dolltimetraveler1 wrote:I was wondering about something , ordoll has created hollow breast ( very smart ) and as a result they have now seen that these air pockets can be injected with air to make the breast bigger ( 2 times ) .
so my question is this , knowing now that air injection can be done , is or will ordoll create other hollow area's in dolls bodies that would allow more body modifications ???
In another words well placed hollow area's in the butt area could be done that would allow air injection of equal amounts and will be able to have a larger butt area for people who like that sort of thing! the hollow area would have to ( i imagine , be a alsmost full butt cheek area on each side to allow the cheeck to inflate and look correctly ( as the breast do in another words !) .
I actually think this would be a smart move for the ordoll company . offering something other doll companies aren't offering .
This may also be possible for thigh area's .
all of which will also make the doll a little lighter ( having hollow area's and also make it possible to modify the dolls for customers using air injection instead of using more doll material making area's bigger !
will this ever be a possibility
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: air pockets in bodies for modifications
Also in know this works , Doll companies could ( if they will ) make area's ( after testing first for the correct shape of air pockets "hollow area" can actually make a semi hollow area in the butt cheeks which will lighten the doll and also enable body modifications of air injection for larger butt cheeks as an option for customers who want it done on their doll..
Hopefully companies will enter this new design and do this .
Re: air pockets in bodies for modifications
Preasure/ weight/ air?
This however could be the ultimate Torso doll! Inflatable tits and ass on a silicone/ TPE doll...
I would buy it for shure!
Click to go to my Doll Album
I find greater companionship in inert figures, animals & speechless artifacts, for I can enjoy their presence & there is no psychic drain”
― Anton Szandor LaVey
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: air pockets in bodies for modifications
-
- Senior Member
- Posts: 265
- Joined: Wed Sep 05, 2012 2:18 pm
- Contact:
Re: air pockets in bodies for modifications
1. the tits would fall off[the 2 different types of tpe will pull apart].
2. the doll would be junk In a week, all tore up, don't believe me I can post some pic's of this type of plying to a doll I have, just won't stand up to anything.
3. tpe is a one pour cycle, once started you can't bond hot to cold tpe.
4. the tpe bad, you can't glue tpe like you can glue silicone, even some silicones won't bond together[rtv in tube will not stick to luquid silicone.[tryied it].
5. tpe is a oil based vinyl, sorry, you can't bond oil with any type of glue for a perenment fix.
6. tpe has to be heated to 350 to 365 degrees to melt and then pour into mold and let solidifiy.
7. silicone doesn't need heat to cure, any room above 70 degrees will cure silicone, even if the tube sits on store shelf to long.
8. tpe can be melted, silicone will not melt once cured.
9. if you put air in a 2 ply doll, it will make the plies unseal quicker, another no,no.
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: air pockets in bodies for modifications
using this same methode , a doll maker could also redo the butt mold and even thigh moulds of a single mold .
sture wrote:
I love this idea! But could there be a problem with air pockets in the buttock when the doll is sitting?
Preasure/ weight/ air?
as the butt if inflated ( if made correctly with air pockets ) would still give a larger rounder shape , still normal roundness just bigger , so should still sit just fine , and as far as weight , how much does simple air weigh? not much at all.
THE ONLY BIGGEST PROBLEM I SEE WITH THIS , WOULD BE OVER INFLATING THEM , IF A PERSON DOES A PRE SET PRE TESTED AMOUNT THEIR WOULD BE NO PROBLEM OR IF FACTORY DID THE INFLATION TO RECOMMENDED LEVELS .
-
- Former Member
- Posts: 728
- Joined: Fri Apr 11, 2014 11:47 pm
- Location: Previously known as Nurseguy13
Re: air pockets in bodies for modifications
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: air pockets in bodies for modifications
maybe someone knows the link and can repost it on here for you .
-
- Contributing Poster
- Posts: 34
- Joined: Sat Jan 02, 2016 8:29 am
- Contact:
Re: air pockets in bodies for modifications
Ok, and what about the Busty Aichan (sex toy). It's a multilayered TPE with different density.solitaryman2414 wrote:If you put two different types of tpe in a doll,
1. the tits would fall off[the 2 different types of tpe will pull apart].[... describe lot of difficulties]
Very smart and it's giggle.
-
- Former Member
- Posts: 728
- Joined: Fri Apr 11, 2014 11:47 pm
- Location: Previously known as Nurseguy13
Re: air pockets in bodies for modifications
Yeah I may pm the manufacturer. I think my dolls breasts are solid. But I like your innovative idea on it. It seems like a fairly sound idea that could potentially have some great resultstimetraveler1 wrote:dollguy13, you should really ask what person doll manufacturer that made your doll, it will depend on how old your doll is , if it has a air pocket in the breast when molded that could be inflated, if you don't already own a doll yet ask this question to whatever doll company you are thinking of buying from. their has been a post on here where someone did this air injection on their own.
maybe someone knows the link and can repost it on here for you .
Re: air pockets in bodies for modifications
There are a few basic precautions to take into account when designing all this but doll makers know about this already. I'm sure all of these wild and great ideas are possible. But are they cost effective and is there a big enough market?
Anyway, that was my 2 cents.
Cheers
Canadian doll enthusiast.