The Doll Forum

Coeros wrote: ↑Wed Jan 31, 2024 8:26 pm

johnmagicnl wrote: ↑Sun Jan 28, 2024 10:25 am

john1972 wrote: ↑Sun Jan 28, 2024 9:40 am

johnmagicnl wrote: ↑Sun Jan 28, 2024 3:46 am

Hello,

Thank you for reaching out with your query. We have developed an M8 connector, but it appears that it cannot be used with the ZELEX SLE series dolls due to the non-removable screw in the doll's head.
M8toM16Connector6.jpg
M8toM16Connector7.jpg
M8toM16Connector8.jpg
At present, the only compatible connector we have for the ZELEX SLE series is the M16 / Sino / Sanhui Connector. This particular connector works by attaching the doll's body and head in a specific manner.
5.jpg
While this connector is suitable for displaying the doll, please note that it may cause some strain on the doll's neck. For long-term storage, we recommend detaching the head and using a different screw for suspension. This approach helps to ensure the longevity and integrity of the doll.

If you have any more questions or need further assistance, please feel free to ask.

Best regards,
Coeros

Thank you for answering my question. I do have hopes you will find a solution, you stands are excellent and I would hate to not be able to use it.
I am still wondering why Zelex chose for a non-removable screw in the doll's head.

johnmagicnl wrote: ↑Thu Feb 01, 2024 7:11 am

Coeros wrote: ↑Wed Jan 31, 2024 8:26 pm

johnmagicnl wrote: ↑Sun Jan 28, 2024 10:25 am

john1972 wrote: ↑Sun Jan 28, 2024 9:40 am

johnmagicnl wrote: ↑Sun Jan 28, 2024 3:46 am

Hello,

Thank you for reaching out with your query. We have developed an M8 connector, but it appears that it cannot be used with the ZELEX SLE series dolls due to the non-removable screw in the doll's head.
M8toM16Connector6.jpg
M8toM16Connector7.jpg
M8toM16Connector8.jpg
At present, the only compatible connector we have for the ZELEX SLE series is the M16 / Sino / Sanhui Connector. This particular connector works by attaching the doll's body and head in a specific manner.
5.jpg
While this connector is suitable for displaying the doll, please note that it may cause some strain on the doll's neck. For long-term storage, we recommend detaching the head and using a different screw for suspension. This approach helps to ensure the longevity and integrity of the doll.

If you have any more questions or need further assistance, please feel free to ask.

Best regards,
Coeros

Thank you for answering my question. I do have hopes you will find a solution, you stands are excellent and I would hate to not be able to use it.
I am still wondering why Zelex chose for a non-removable screw in the doll's head.

Zelex might be considering that such standardization is beneficial for the dolls, making them more convenient for users.
I hope that the screws on dolls from other Zelex series in the future will be detachable.

Coeros wrote: ↑Sun Feb 04, 2024 8:33 pm

johnmagicnl wrote: ↑Thu Feb 01, 2024 7:11 am

Coeros wrote: ↑Wed Jan 31, 2024 8:26 pm

johnmagicnl wrote: ↑Sun Jan 28, 2024 10:25 am

john1972 wrote: ↑Sun Jan 28, 2024 9:40 am

johnmagicnl wrote: ↑Sun Jan 28, 2024 3:46 am

Hello,

Thank you for reaching out with your query. We have developed an M8 connector, but it appears that it cannot be used with the ZELEX SLE series dolls due to the non-removable screw in the doll's head.
M8toM16Connector6.jpg
M8toM16Connector7.jpg
M8toM16Connector8.jpg
At present, the only compatible connector we have for the ZELEX SLE series is the M16 / Sino / Sanhui Connector. This particular connector works by attaching the doll's body and head in a specific manner.
5.jpg
While this connector is suitable for displaying the doll, please note that it may cause some strain on the doll's neck. For long-term storage, we recommend detaching the head and using a different screw for suspension. This approach helps to ensure the longevity and integrity of the doll.

If you have any more questions or need further assistance, please feel free to ask.

Best regards,
Coeros

Thank you for answering my question. I do have hopes you will find a solution, you stands are excellent and I would hate to not be able to use it.
I am still wondering why Zelex chose for a non-removable screw in the doll's head.

Zelex might be considering that such standardization is beneficial for the dolls, making them more convenient for users.
I hope that the screws on dolls from other Zelex series in the future will be detachable.

Perhaps, the Dual-Function doll stand is a very decent choice without any modification.
Dual-Function Doll Stand: https://www.coeros.com/product/dual-fun ... oll-stand/

Coeros wrote: ↑Thu Sep 28, 2023 3:21 am
This is a tutorial on Hydraulic Stand, I hope it will be helpful to everyone.
Hydraulic Stand: https://www.coeros.com/product/the-best ... lay-stand/

Coeros wrote: ↑Thu Sep 28, 2023 3:21 am
This is a tutorial on Hydraulic Stand, I hope it will be helpful to everyone.
Hydraulic Stand: https://www.coeros.com/product/the-best ... lay-stand/

john1972 wrote: ↑Tue Mar 12, 2024 12:10 am My stand is still going strong..
Built like a tank..
Fantastic stand

Coeros wrote: ↑Sun Feb 04, 2024 8:39 pm Perhaps, the Dual-Function doll stand is a very decent choice without any modification.
Dual-Function Doll Stand: https://www.coeros.com/product/dual-fun ... oll-stand/

Zenrel wrote: ↑Tue Mar 19, 2024 6:51 pm Finally got mine too! It was tough at first, trying to optimize the best height. Once it got set, it makes transportation and storage a lot easier! One thing that I recommend for the next iteration of a lift, is to add "fixed" wheels as extra pieces. Having all four wheels swivel does make things a bit hard to avoid hitting walls or objects.

Coeros wrote: ↑Tue Mar 19, 2024 8:55 pm

Zenrel wrote: ↑Tue Mar 19, 2024 6:51 pm Finally got mine too! It was tough at first, trying to optimize the best height. Once it got set, it makes transportation and storage a lot easier! One thing that I recommend for the next iteration of a lift, is to add "fixed" wheels as extra pieces. Having all four wheels swivel does make things a bit hard to avoid hitting walls or objects.

Hi,

Thank you so much for your feedback and words of encouragement! We are delighted to hear that the stand has made transporting and storing your dolls much more convenient for you.
Also, thank you for your suggestion. Are "fixed" wheels wheels with fixed directions?

Best regards,
Coeros

koaplayer1998 wrote: ↑Tue Mar 19, 2024 7:16 pm

Coeros wrote: ↑Sun Feb 04, 2024 8:39 pm Perhaps, the Dual-Function doll stand is a very decent choice without any modification.
Dual-Function Doll Stand: https://www.coeros.com/product/dual-fun ... oll-stand/

If anyone wants to look closer at this 2-in-1 stand, there is a new thread dedicated to it:
viewtopic.php?t=172433