Head stand

[narasinha]

Various shops sell head stand. They are often small, unstable and over priced. Here is what you need for a M16 compatible stand:

A cheap tripod (less than $10 on Aliexpress) or use your own:

tripod.jpg (44.09 KiB) Viewed 381 times

An 1/4 female to M8 male adapter for camera (less than $3):

adapter.jpg (59.99 KiB) Viewed 381 times

A M8 inside / M16 outside threaded nut coupler adapter (around $3) :

coupler.jpg (73.83 KiB) Viewed 381 times

A long M16 nut (less than $4):

nut.jpg (91.11 KiB) Viewed 381 times

and here you are:

stand.jpg (67.27 KiB) Viewed 381 times

Work with screw or quick connector heads. Can also be used to hold the head while washing implanted hairs.

[Arisa_]

Nice! Thanks for pointing out all the appropriate parts.

[koaplayer1998]

Good recap above for a cheap one that comes in at around $15. However, I would need a tripod that had a pretty good height-adjustment.
I bought a head stand awhile back from Coeros and it works well. I got the tall version (yes, it's stable) that's on the right in the photo below, because my gal has a LOT of hair.

Wood-Sex-Doll-Head-Stand-2.jpg (76.01 KiB) Viewed 202 times

https://www.coeros.com/product/wood-sex ... lay-stand/

I'd also imagine that one might be able to find a similar candle holder that could easily be modified. That's what I first looked at doing, but didn't see any that really stood out to me, so I decided to save myself the trouble and just pay for one that I didn't have to do any after-market messing around with.

[trendysteven]

This Is great! I didn't know there was an M8/M16 adaptor, I will be getting one so I can convert all the tripods I have into doll head stands!

[trendysteven]

Just today, I made myself my first cheap doll head stand using some bolts off of Amazon and an old lamp base I had lying around:



Spent about £12 for 4x the bolts and nuts, will be enough for a few heads!!

[Davey2469]

I had a table top mic stand and added a plastic coupler.

IMG_0817.jpeg (1.78 MiB) Viewed 161 times