Page 1 of 1
My gorgeous new Kimmi Lovecok
Posted: Sat Apr 20, 2024 10:24 pm
by genesis218
I finally finished modifying my new Kimmi air babe. I have at least 20 hours in modifying her. All her seams are strengthened with three coats of Loctite vinyl fabric plastic flexible adhesive. Her lower legs are strengthened with Amazing Goop adhesive so she can stand on her own. I use VIP repair adhesive for her nipples so they stay attached. This doll came with an ugly pussy/asshole insert, so I eliminated that and installed a surface mounted pussy & asshole from an old doll and glued them on with the Amazing Goop adhesive. I installed long fake fingernails and long eye lashes. I changed the eye color to blue with Tamiya acrylic paint. I cut all her original hair off and installed a beautiful long blonde wig. I also permanently glue her arms in place so they don’t move our pop out and fill in the ugly gap with Amazing Goop. The last picture is her smiling in her new satin pajamas. And some perfume and she is ready to romance in bed.
Re: My gorgeous new Kimmi Lovecok
Posted: Sat Apr 27, 2024 3:31 pm
by genesis218
I just had to buy her some jewelry being she always makes me happy and puts a big smile on my face.
Re: My gorgeous new Kimmi Lovecok
Posted: Sat Apr 27, 2024 5:44 pm
by Joe 90
She looks very very nice. How tall is the doll BTW, she looks relatively tall in the photos.
Re: My gorgeous new Kimmi Lovecok
Posted: Sat Apr 27, 2024 8:13 pm
by genesis218
Five foot two.
Re: My gorgeous new Kimmi Lovecok
Posted: Sun Apr 28, 2024 9:29 am
by yorktown
Howdy
Great stuff - G218 -
Your "Kimmi" is wonderful -
I know everyone is different - but I find the NMC legacy the prefect size, I have a Daio Shi super babe that is a full 170CM tall - and she just seems out of sorts as compared to Kimmi/ Natalie / Cayenne - these air babes are simply the best in the inflata babe world
Sure/ sure - some air babes do it better than others - however these NMC legacy air babes are/ were the pinacol of air babe technology
Best of luck G218 with Kimmi may she live on forever
Stay inflated
Re: My gorgeous new Kimmi Lovecok
Posted: Sun Apr 28, 2024 6:19 pm
by genesis218
Thanks yorktown. They are the most realistic of the air babe out there but sadly just not available anymore. I’m just lucky to have four of them and lucky to have boughten the last two just lately from overseas. The photo I’m showing is the three of them that currently have the breath of life in them. The one on the left is the oldest at 4+ years with only 2 or 3 bouts of depression during that time. The one on the right I’ve had for 2+ years and the one in the middle is the newest to the family. After all the countless modifications I did to her, she is pretty much bullet proof for at least four years. What’s interesting is the slight differences in them like a bigger booty on the oldest one, not such of a booty on the 2 year old and wonderful big breasts on the new one. There are also slight differences in the heads with all of them having that beautiful smile but the newest one showing her teeth. Well until they come out with a truly lightweight doll and I’ve tried them all, I’ll be romancing my air babes. Hope you guys have a great summer.
Re: My gorgeous new Kimmi Lovecok
Posted: Tue Apr 30, 2024 8:48 am
by Poly Skipper
Nice. That's a lot of mods..
Reminds me of my Hannah Harper doll.
Why would you glue in the inserts?
Re: My gorgeous new Kimmi Lovecok
Posted: Tue Apr 30, 2024 5:47 pm
by genesis218
Lots of mods especially at the seams make her last for years without ever really adding air to the doll. I don't use the original ugly two hole barbell looking insert. I use the old style separate single hole surface mounted inserts from an old doll and I glue them in place of the original barbell insert. I don't use the doll for sex so it doesn't matter if the inserts don't connect together. She is mainly my sleeping partner.
Re: My gorgeous new Kimmi Lovecok
Posted: Tue Apr 30, 2024 9:30 pm
by Kimmi Lovecok
Re: My gorgeous new Kimmi Lovecok
Posted: Sat May 04, 2024 1:26 pm
by genesis218
Tamiya paint is the paint to use on vinyl and plastic. My oldest dolls eyes are starting to fade so I’m going to clear coat them with Tamiya clear.
Re: My gorgeous new Kimmi Lovecok
Posted: Sun May 05, 2024 9:12 am
by Inflatablefun82
genesis218 wrote: ↑Sun Apr 28, 2024 6:19 pm
Thanks yorktown. They are the most realistic of the air babe out there but sadly just not available anymore. I’m just lucky to have four of them and lucky to have boughten the last two just lately from overseas. The photo I’m showing is the three of them that currently have the breath of life in them. The one on the left is the oldest at 4+ years with only 2 or 3 bouts of depression during that time. The one on the right I’ve had for 2+ years and the one in the middle is the newest to the family. After all the countless modifications I did to her, she is pretty much bullet proof for at least four years. What’s interesting is the slight differences in them like a bigger booty on the oldest one, not such of a booty on the 2 year old and wonderful big breasts on the new one. There are also slight differences in the heads with all of them having that beautiful smile but the newest one showing her teeth. Well until they come out with a truly lightweight doll and I’ve tried them all, I’ll be romancing my air babes. Hope you guys have a great summer.
They are gorgeous…she has the most beautiful face ever imo, so very attractive
Re: My gorgeous new Kimmi Lovecok
Posted: Mon May 06, 2024 12:32 am
by Dollicio
genesis218 wrote: ↑Tue Apr 30, 2024 5:47 pm
Lots of mods especially at the seams make her last for years without ever really adding air to the doll. I don't use the original ugly two hole barbell looking insert. I use the old style separate single hole surface mounted inserts from an old doll and I glue them in place of the original barbell insert. I don't use the doll for sex so it doesn't matter if the inserts don't connect together. She is mainly my sleeping partner.
Hello Genesis218,
Your post is fascinating and gives doll owners the knowledge to mod their dolls to make them even better. TPE and vinyl are different materials. What kind of glue is effective and safe to use to bond TPE to vinyl?
Cheers,
Dollicio
Re: My gorgeous new Kimmi Lovecok
Posted: Fri May 10, 2024 10:52 pm
by genesis218
TPE is difficult to bond to. I used Amazing GOOP to bond the two lower holes to the vinyl body that seems to work well and I also overlap the edge of the insert by about a quarter inch to help bond it in place. Time will tell how durable it ends up being.
Re: My gorgeous new Kimmi Lovecok
Posted: Sun May 12, 2024 4:09 pm
by Dollicio
Hi Genesis218,
Thanks for the info.
I wonder what the inflatable doll manufacturers use?
Cheers
