Petite Pib???

priceritchie2010 · Post by **priceritchie2010** » Wed Feb 10, 2010 11:17 am

Fruithead wrote:
priceritchie2010 wrote:
jvg61 wrote:
priceritchie2010 wrote:I would be remiss if I didn't point out that his current full size doll is already less expensive than any other doll of it's size and quality.

I wouldn't expect any price reduction just because it's a few inches shorter.

But since the query was for Patrick......again, what say you, oh master of Private Dolls?

i would have to disagree with this.pib and two other manufacturer's dolls that i won't name out of respect that this is a pib thread,but more or less all fall into the $4800-$5000 price range/plus s&h.

i'd have to add that this is a fair and moderate price range for these products given the pleasure they give on all levels.
I'm not shy about naming the other makers here. Lovable Doll, Real Doll, Boy Toy, Ruby 13...etc. Those are Pat's main competition. We all know it, no big surprise.
Do ANY of those companies lower their prices just because they offer a 5 ft 1 inch doll?
Of course not. RD sells their 4-10 doll for the same cost as their 5-6 doll.
Neither will PIB. But PIB will still be....somewhat....less expensive than most of those I mentioned, and in just my opinion, better quality dolls.

Current prices according to their sites today:

RD: 5999.00.....before any options
LD: 4800.00....that one surprises me. Didn't they used to be a tad higher? I seem to recall 5400.00 a while back, could be wrong. But they don't offer a petite doll that I know of.
BT: 5999.99, offering 500 off presently.
Ruby13: 5200.00

Again...numbers don't lie.
Anatomical is an exception to this. Oleg has said he would charge less for his body 2 as it is smaller and uses less silicone to manufacture.

Anatomical wasn't on my radar, as they are a foreign doll maker to me. After the shipping and custom charges, I imagine they be a tad pricey for US customers, alot more than the 4800.00 that we are discussing here.

flavortang · Post by **flavortang** » Wed Feb 10, 2010 11:21 am

priceritchie2010 wrote:
Fruithead wrote:
priceritchie2010 wrote:
jvg61 wrote:
priceritchie2010 wrote:I would be remiss if I didn't point out that his current full size doll is already less expensive than any other doll of it's size and quality.

I wouldn't expect any price reduction just because it's a few inches shorter.

But since the query was for Patrick......again, what say you, oh master of Private Dolls?

i would have to disagree with this.pib and two other manufacturer's dolls that i won't name out of respect that this is a pib thread,but more or less all fall into the $4800-$5000 price range/plus s&h.

i'd have to add that this is a fair and moderate price range for these products given the pleasure they give on all levels.
I'm not shy about naming the other makers here. Lovable Doll, Real Doll, Boy Toy, Ruby 13...etc. Those are Pat's main competition. We all know it, no big surprise.
Do ANY of those companies lower their prices just because they offer a 5 ft 1 inch doll?
Of course not. RD sells their 4-10 doll for the same cost as their 5-6 doll.
Neither will PIB. But PIB will still be....somewhat....less expensive than most of those I mentioned, and in just my opinion, better quality dolls.

Current prices according to their sites today:

RD: 5999.00.....before any options
LD: 4800.00....that one surprises me. Didn't they used to be a tad higher? I seem to recall 5400.00 a while back, could be wrong. But they don't offer a petite doll that I know of.
BT: 5999.99, offering 500 off presently.
Ruby13: 5200.00

Again...numbers don't lie.
Anatomical is an exception to this. Oleg has said he would charge less for his body 2 as it is smaller and uses less silicone to manufacture.
Anatomical wasn't on my radar, as they are a foreign doll maker to me. After the shipping and custom charges, I imagine they be a tad pricey for US customers, alot more than the 4800.00 that we are discussing here.

Yeah, those shipping fees for ordering from Russia must be INSANE. That's why I've narrowed down my doll choices to LD and PIB because I could drive to pick up an LD.

priceritchie2010 · Post by **priceritchie2010** » Wed Feb 10, 2010 12:54 pm

flavortang wrote:
priceritchie2010 wrote:
Fruithead wrote:
priceritchie2010 wrote:
jvg61 wrote:
priceritchie2010 wrote:I would be remiss if I didn't point out that his current full size doll is already less expensive than any other doll of it's size and quality.

I wouldn't expect any price reduction just because it's a few inches shorter.

But since the query was for Patrick......again, what say you, oh master of Private Dolls?

i would have to disagree with this.pib and two other manufacturer's dolls that i won't name out of respect that this is a pib thread,but more or less all fall into the $4800-$5000 price range/plus s&h.

i'd have to add that this is a fair and moderate price range for these products given the pleasure they give on all levels.
I'm not shy about naming the other makers here. Lovable Doll, Real Doll, Boy Toy, Ruby 13...etc. Those are Pat's main competition. We all know it, no big surprise.
Do ANY of those companies lower their prices just because they offer a 5 ft 1 inch doll?
Of course not. RD sells their 4-10 doll for the same cost as their 5-6 doll.
Neither will PIB. But PIB will still be....somewhat....less expensive than most of those I mentioned, and in just my opinion, better quality dolls.

Current prices according to their sites today:

RD: 5999.00.....before any options
LD: 4800.00....that one surprises me. Didn't they used to be a tad higher? I seem to recall 5400.00 a while back, could be wrong. But they don't offer a petite doll that I know of.
BT: 5999.99, offering 500 off presently.
Ruby13: 5200.00

Again...numbers don't lie.
Anatomical is an exception to this. Oleg has said he would charge less for his body 2 as it is smaller and uses less silicone to manufacture.
Anatomical wasn't on my radar, as they are a foreign doll maker to me. After the shipping and custom charges, I imagine they be a tad pricey for US customers, alot more than the 4800.00 that we are discussing here.
Yeah, those shipping fees for ordering from Russia must be INSANE. That's why I've narrowed down my doll choices to LD and PIB because I could drive to pick up an LD.

Either one would be a fine choice!
See! I'm not gonna try and steer you to a PIB.
LD makes a fine doll too from what I see and read from their customers.

Best of luck to you!

Everhard · Post by **Everhard** » Wed Feb 10, 2010 2:37 pm

Locking this topic because it has degenerated into members bashing each other.

UPDATE: The offending posts have been removed.

Thread is being unlocked.

Please keep on topic and refrain from any further member bashing.

Any further Rule 3 violation will be dealt with to the maximum penalties.

3) No demeaning or derogatory statements targeting members, management or the Forum in general, in any sections including chat and in PM's targeted at members. **, *** for severe violations.

3a. Posts with an obvious intention of insulting or hurting the feelings of any member or forum management, are not allowed. Common sense and courtesy apply. i.e.. If you want to post a negative review or comment about a doll do not do so in the announcement thread of a member who just received that doll.

Points and Penalty System

1 point will be awarded for each violation.

3 points will result in a 48 hour time out.

Additional breaches will carry 1 week time out.

10 points will result in a 1 month time out.

Points will be removed after a period of 1 year

1. * Warning only
2. ** Point on record
3. *** Mandatory ban

r4m · Post by **r4m** » Fri Feb 12, 2010 12:18 am

Locking this topic because it has degenerated into members bashing each other.
UPDATE: The offending posts have been removed.

No Fair! I go away for 1-day and I miss all of the good stuff!

As for a petite doll, you could take it all the way down to 2 or 3 feet and there would still be a market. Build a high-end doll that is an order of magnitude easier to move/store/hide, and I'm in.

The weight of my dolls didn't bother me too much until I threw my back out moving furniture a month ago. Now I'm really glad I have a few TeddyBabes. I'm healed enough to use my Ruby and LifeDoll if I'm careful, but not enough to even consider my circa 2003 4Woods. There are a few threads about small dolls in general, and they get quite a bit of traffic and response.

Cheers

Old_School · Post by **Old_School** » Wed Mar 10, 2010 3:14 am

Ok...I did not have time to read all the posts, but if Patrick does make a smaller doll, then here is my request.

1. Smaller boobs.
2. No big eyes like the Boy Toy or Ruby 13 (No offense to those folks)

3. Different faces from other dolls. (The others in my opinion tend to have Asian looking eyes.)
4. Light weight, but not at the sacrifice of quality. (I know Patrick wouldn't do that anyway.)

5. Please please...realistic eyes.

6. Oh and a pussy that is thirteen inches deep for my tool (ok...now I'm just a liar.)

priceritchie2010 · Post by **priceritchie2010** » Wed Mar 10, 2010 8:47 am

Old_School wrote:Ok...I did not have time to read all the posts, but if Patrick does make a smaller doll, then here is my request.

1. Smaller boobs.
2. No big eyes like the Boy Toy or Ruby 13 (No offense to those folks)
3. Different faces from other dolls. (The others in my opinion tend to have Asian looking eyes.)
4. Light weight, but not at the sacrifice of quality. (I know Patrick wouldn't do that anyway.)
5. Please please...realistic eyes.
6. Oh and a pussy that is thirteen inches deep for my tool (ok...now I'm just a liar.)

The boobs will be smaller for sure.
The faces will be the same heads he has now.
50-55 pounds is the goal. Lighter, without sacrificing quality...

If the eyes he uses aren't realistic enough, there are a few sites that sell ultra realistic eyes for dolls.
If you had a 13 inch willie, you'd rip ANY silicone doll in half.....lol.
I imagine all 3 canals will remain the same size as they currently are.

Dollscrazy · Post by **Dollscrazy** » Tue Mar 23, 2010 2:34 pm

Great idea priceritchie2010... I'm in for petite also and light weight doll is great too, but like Patrick said; petite but mature woman and please keep the boob's the way they are right now, small breast gone a look like a teen !

Post by **RainLover** » Wed Mar 24, 2010 5:49 am

Dollscrazy wrote:Great idea priceritchie2010... I'm in for petite also and light weight doll is great too, but like Patrick said; petite but mature woman and please keep the boob's the way they are right now, small breast gone a look like a teen !

What I love the most about Eden is how realistic she looks. The expression is very very good, I like the way the eyes are set, but the way Patrick does the freckles and the texture of the lips really sets her apart from other dolls. Have you noticed the lips? I think it's one of the things that make a doll look human on first glance. It's a marker for me, for sure, and the breast size is also very important.

So yeah, very much interested in seeing what a petite PIB would look like!

(And on a side note, I like the PIB name for the same reasons others have mentioned.)

timetraveler1 · Post by **timetraveler1** » Wed Mar 24, 2010 10:35 am

Bigger breast , if you make a doll with smaller breast than you would have a doll with medium size and smaller breast , so how about next making a doll with larger breast for what the rest of the people who like bigger breast want ? (that way their is something for everyone !) not gigantic breast but a nice d size breast .

Dollscrazy · Post by **Dollscrazy** » Wed Mar 24, 2010 2:26 pm

timetraveler1 wrote:Bigger breast , if you make a doll with smaller breast than you would have a doll with medium size and smaller breast , so how about next making a doll with larger breast for what the rest of the people who like bigger breast want ? (that way their is something for everyone !) not gigantic breast but a nice d size breast .

I agree... 100% ! D cup is the best size for me too...

Doge · Post by **Doge** » Fri Mar 26, 2010 3:12 pm

Just a heads-up for those of you requesting a petite doll, who've never had one.

I have had a RealDoll body 2 -- 5'0", C-cup -- for several years now. Finding proper fitting clothing for her has been a challenge since Day 1. Finding bras and panties has never been too hard. Tops can be a bit more of a challenge, but still doable. However, finding skirts has been very difficult. Most real girls do not have the ultra thin waist, coupled with the lovely and ample hips and buttocks that the RD Body 2 has. You find a skirt that fits over the hips, but it's too big in the waist. Buy a girl's size 10, which fits the waist, and there's no way it fits over the hips.

I'm not complaining. I've enjoyed owning this RD, and I look forward to one day (hopefully soon) purchasing one of Patrick's future petite offerings. I just wanted you all to be aware of some issues of petite ownership.

snake53 · Post by **snake53** » Fri Mar 26, 2010 3:34 pm

I wouldn't want to see any smaller waist. The current PIB body has a very small waist - 22 ins - which combined with a 34 hip means that some skirts, shorts and pants are too big around the waist. Tight but stretchy is the solution. Belts are a bit more difficult, I haven't been able to find a belt that small in Australia. Solution there has been belts with holes all the way around that you can cut shorter or elastic backed ones that you can stitch tighter.