SRS (Silconefun's Rail System)

siliconefun · Post by **siliconefun** » Tue Sep 03, 2019 2:26 pm

Hi dear doll lovers,

Here's the SRS (Silconefuns Rail System).
It wasn't an easy job to find the best configuration for a sloped room like shown in the pics below but I'm more than happy with the result

I've installed 2 rail systems: one who runs over the bed (sex mode rail) and one who runs over the passage (model shoot rail). Each rail has 4 fixings rated at 200 kg (for concrete), that's safe!!!

Overall view as seen when entering 'Area 51':

: 20190603_202731.jpg (198.7 KiB) Viewed 3362 times

The sex mode rail:
The doll can be dress/undressed aside the bed and slid onto the bed area to enjoy the full power of sex fantasies (Already tested....

)

: 20190603_202929.jpg (161.87 KiB) Viewed 3362 times

The ceiling hook next to the light serves to install a love swing and supports the load for a real person (4 heavy-duty fixings)

The model shoot rail:
The 'model sidewalk' for photographing the best shoots from the hussies.
With enough free access around their bodies it also serves for main dress/undressing as well for maintenance purpose. This solution is superior compared to the use of a traditional doll stand.

: 20190603_203000.jpg (176.5 KiB) Viewed 3362 times

Safety first:

: 20190603_203041.jpg (206.84 KiB) Viewed 3362 times

Rail end stops (screw M6 x 50 + M6 self-locking cap nut) prevent the 'worst case' and keeps the system safe for you and your precious doll(s).

And finally:

: 20190603_204429.jpg (232.39 KiB) Viewed 3362 times

A non-Photoshopped shoot showing the SRS (Silconefun's Rail System) & SSM (Siliconefun's Stance Modifier) with a RD2 body B hybrid.

Same pic, now Photoshopped:

: 20190603_204429-Edit.jpg (262.58 KiB) Viewed 3362 times

Hardware in use:

- Unistrut P2751-EG 4 Wheel Eye Loop Trolley (eBay)
- Channel sliders (custom fab)
- Hunter's Specialties Mag 4:1Lift System (Amazon)
- MPR-Support channels 41/41/2.5, sendzimir galvanised, ~79"/2,0 m, 4EA (MÜPRO Luxembourg)
- SSM (Silconefun's Stance Modifier), custom fab => available soon for order!!

Do it, try it, enjoy it!

- SF -

Post by **Tsall** » Thu Sep 05, 2019 4:09 pm

Very nice and easy solution. I like it.

siliconefun · Post by **siliconefun** » Fri Sep 06, 2019 1:20 pm

Tsall wrote:Very nice and easy solution. I like it.

Hi Tsall,

Thanks a lot, we never stop to make innovations in the best sense of generous creativity.

- SF -

siliconefun · Post by **siliconefun** » Fri Sep 06, 2019 1:29 pm

Continuation:

Channel slider (custom fab)

: 20190611_171055.jpg (212.27 KiB) Viewed 3211 times

: 20190611_171129.jpg (280.89 KiB) Viewed 3211 times

Modified Unistrut P2751-EG 4 Wheel Eye Loop Trolley (eBay)

: Unistrut P2751-EG 4.jpg (293.1 KiB) Viewed 3211 times

: 20190611_170734.jpg (222.35 KiB) Viewed 3211 times

: 20190611_170758.jpg (194.32 KiB) Viewed 3211 times

Channel slider & Unistrut P2751-EG 4 Wheel Eye Loop Trolley

: 20190611_171552.jpg (213.87 KiB) Viewed 3211 times

Do it, try it, enjoy it!

- SF -

KarmaMusic · Post by **KarmaMusic** » Fri Sep 06, 2019 3:25 pm

Looks Awesome and even less obtrusive on the ceiling!!

ChaseroftheSun · Post by **ChaseroftheSun** » Fri Sep 06, 2019 6:37 pm

WOW!! Very impressive! ...I thought I was doing good with my Gantry & Hand-crank winch. Now I want to look at creating something like this as well... however it might be a little beyond my skill level as you obviously have some serious skills yourself!

siliconefun · Post by **siliconefun** » Sat Sep 07, 2019 8:18 am

KarmaMusic wrote:Looks Awesome and even less obtrusive on the ceiling!!

Thanks KarmaMusic

Without painted channel sides it looks rather obtrusive. You can also place some cool lights and spots on the rail

siliconefun · Post by **siliconefun** » Sat Sep 07, 2019 8:23 am

ChaseroftheSun wrote:WOW!! Very impressive! ...I thought I was doing good with my Gantry & Hand-crank winch. Now I want to look at creating something like this as well... however it might be a little beyond my skill level as you obviously have some serious skills yourself!

Thanks ChaseroftheSun

I've had a self-made mobile gantry with a hand-crank winch but I didn't like it that much so I decided to wreck it. This is the reason I opted for the rail system.

Chevy1968 · Post by **Chevy1968** » Tue Oct 15, 2019 1:31 pm

Nice looks very slick!

siliconefun · Post by **siliconefun** » Tue Oct 15, 2019 2:40 pm

Chevy1968 wrote:Nice looks very slick!

Thanks Chevy1968

Knightshift · Post by **Knightshift** » Tue Oct 15, 2019 2:50 pm

And to think, most guys have to spend thousands of $$$ remodeling the kitchen or bathroom to keep their women happy!

tattooed dolls · Post by **tattooed dolls** » Wed Oct 16, 2019 12:45 am

This is pure gold!

siliconefun · Post by **siliconefun** » Sat Oct 19, 2019 4:37 am

Knightshift wrote:And to think, most guys have to spend thousands of $$$ remodeling the kitchen or bathroom to keep their women happy!

True that

This arrangement isn't pricey and you can add some spotlights!!

tattooed dolls wrote:This is pure gold!

Thanks tattooed dolls

siliconefun · Post by **siliconefun** » Sat Oct 19, 2019 5:27 am

I still have 2 more channels left (MPR-Support channels 41/41/2.5, sendzimir galvanised, ~79"/2,0 m, MÜPRO Luxembourg) which will be installed in the kitchen/living room area