Special Project: EVA with Interactive Audio!
-
- Contributing Poster
- Posts: 38
- Joined: Wed Feb 24, 2016 2:59 am
- Contact:
Re: Special Project: EVA with Interactive Audio!
Re: Special Project: EVA with Interactive Audio!
DD.
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Thanks Ninja, I'll be adding more info as I go, so stay tuned.Ninja Gaiden wrote:Excited about this project, please keep us updated.
Thanks DD.DDdioxine wrote:I am amazed! If I've missed it I appologize in advance, how's the interactive suppose to work? I can see by touching the nipples something supposed to happen?
DD.
Hopefully she'll give an audio response to being fondled in the nipples and groin area, and by thrusting or entering into the Fleshlight insert. She also will have a motion sensor in her navel that will sense your presence when in front of her.
Here's a little YouTube test I did showing how the recording module works...
https://www.youtube.com/watch?v=t1o0vk_D7pE
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
Re: Special Project: EVA with Interactive Audio!
DD.
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Hey DD,DDdioxine wrote:The sound from the second test is amazing!
DD.
Yeah, the Thump speaker makes a huge difference.
Another speaker that works well and has great sound is the TekNMotion Air Capsule which is about the same size.
http://www.walmart.com/ip/TekNMotion-Ai ... r/22025805
What I like better about this one is the power switch is on the side instead of the bottom, so it could be switched on/off without removing from the audio compartment. It also has a built-in mic, but I found it didn't work at the same time with the playback.
Another idea I had rattling around in my head was to use two of these smaller speakers - one for the recording module and the other for Bluetooth so both could be used at the same time.
Sound quality probably wouldn't be nearly as good though.
http://www.amazon.com/dp/B00K00FN3O?psc=1
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- Lahfan1970
- Senior Member
- Posts: 254
- Joined: Sun Jan 03, 2016 3:39 pm
- Location: East of the Sun, West of the Moon
- Contact:
Re: Special Project: EVA with Interactive Audio!
LOL! Excellent job -- love the speaker test. Good luck, we’re all rooting for you!MannequinFan wrote:OK, so far so good today.
I managed to get the button wires paired properly and pulled through the manager.
Looks like there will be plenty of room for the twist connects. I guess after making 24 connections I'll be doing it in my sleep.
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Got a little more work done today getting the holes made for the buttons and PIR.
It turned out that surface mounting the buttons will not work as they will stick up too much and interfere with the nipple installation.
The buttons will be installed from the inside using a wad of Apoxie sculpt behind to cover them. This will work out OK since I can just pre-assemble the whole wiring harness and adhere everything from the inside. I can access the nipples through the arm holes and the PIR through the vag hole. Good thing I have small hands and skinny arms!
The small hole above the vag was a goof. I'll fill that one in.
I'll need to make a mold for a silicone merkin to cover the button... I think the PIR should look OK as a navel decoration.
With a little sparkly jewel above, I think it should come off pretty well... Nipple button from the inside... I've molded some slightly larger silicone nipples to cover the buttons (1-1/2" diameter).
Having the buttons a bit lower will be good to give the nipples a little more "tweak action"...
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
I'm finally feeling almost back to normal after a really bad cold.
Got half the connections made in the wiring harness today.
From top down is adapter, PIR, 2 nipples and the groin button... After twisting the connections, some 5 min. epoxy was applied then taped.
Just have to connect the other half to the module, which should be some tedious fun.
The entire harness will be inserted through the neck and the buttons affixed from inside.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- RoadRoller
- Active Member
- Posts: 117
- Joined: Sat Jul 20, 2013 6:39 am
- Contact:
Re: Special Project: EVA with Interactive Audio!
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Thanks RR!RoadRoller wrote:This is an awesome project, congratulations! Gotta subscribe to this thread.
When this is done I'll be posting some YouTube videos to show how it works (hopefully it all works, lol).
Alright, 2 buttons down, four more connections to go.
The leads are really short so this has proven to be very tedious. Not much room to work.
The wire strands are so fine I can barely see them even with my bifocals on. If I do another one of these, I'll need to find an easier way to do this.
Perhaps soldering on some of these snap connectors...
http://www.homedepot.com/p/22-18-AWG-0- ... /205846720
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- DollAfficionado
- Member
- Posts: 11924
- Joined: Mon Jun 17, 2002 12:00 am
- Location: In Doll Paradise
- Contact:
Re: Special Project: EVA with Interactive Audio!
Review of my SUKI doll from Sili Doll viewtopic.php?f=253&t=73439
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
The wiring harness is now complete, so I should be getting to the fun part here pretty soon! Before permanently installing I'll need to test everything to make sure it still works after all the twisting and connecting.
I think tomorrow I'll do a test with a home made dildo on the adapter to see how well the button works.
Looks like I'll need to trim about 1" to 1-1/2" off the end of the FL sleeve.
6" should be enough length for most of us non-porn star guys I would think.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Had a huge success today on the adapter audio function! I'm very happy!
To make it work, I needed to cut about 2-1/2" off the end of the sleeve. That leaves it about 1/2" from the end of the adapter. The button sticks up about 1/4" so there's just a little travel required to push the button. Also, the small fins on the sleeve were trimmed down to about half their original height so it can move more easily... Here's a little YouTube video I made of the adapter audio test.
Sorry for the grainy picture - the lighting was a bit dim...
https://www.youtube.com/watch?v=y5AXGBdgBW0 That was only three sound bytes programmed for the test, but using the group function, there can be up to 100 for each button.
It would be possible to have several different sound clips each with a little more excitement building up to the 100th clip being the big "O".
So you'd need to hit it 100 times to make her "cum".
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact:
Re: Special Project: EVA with Interactive Audio!
Re: Special Project: EVA with Interactive Audio!
Bored, certified "plastic" surgeon. Serving the masses.
Dolls i have worked on. Real doll ,JM doll,teddybabes,Anime fabric doll,wm doll, d.s dolls, Diao shi, extravaganza air dolls, 1st pc, and candy8teen dolls.
Need work done? Feel free to send me a note.