Special Project: EVA with Interactive Audio!
Re: Special Project: EVA with Interactive Audio!
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Special Project: EVA with Interactive Audio!
Good job
Can she get poked faster if you have shorter audio responses?
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
I'm stoked with how well this is working. Can't wait to get her together!
RK thanks, and yes, you could use shorter clips to increase the pace.
The response time is virtually instant with this so there's no hesitation between clips.
You can also program a different triggering so each time the button is pressed it will stop the previous clip and play the next one.
BTW RK, in regards to your comment a while back on using extra buttons, it looks like you can get them now on the E123 site:
http://www.electronics123.com/shop/prod ... leads-8271
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Special Project: EVA with Interactive Audio!
Regarding wire splicing.MannequinFan wrote: The wiring harness is now complete, so I should be getting to the fun part here pretty soon!
I assume the guys you bought this system from are also the manufacturer.
Do you think they would custom make the same system w/ specific lengths of leads so they would not have to be spliced?
Edit: Looking at the push buttons again, I see they have 5" leads which is what I assume the device comes with. So, they would have to be spliced anyway, but at least they would have to do it and may have a easier system.
I was thinking that push buttons might be installed inside fabric dolls as well. My idea was having a push button activated by the rocking action of the skeleton at the hips. Of course the button would have to be positioned at a max point of skeletal movement so it wouldn't get damaged.
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
I think they get them from some factory in China like everything else that's made anymore.rubherkitty wrote:I assume the guys you bought this system from are also the manufacturer.
You can get them customized with longer play times, but the minimum order is 500 pieces.
Not sure if they would customize wiring at the factory.
I found the other day they also have this MP3 sound board that uses a 32GB micro SD card for storage.
It has terminals to connect 4 buttons. The drawback though is that there's no programming capability, so it could only play just 4 different recordings (1 per button).
http://www.electronics123.com/shop/prod ... locks-8267
If they could get the programming feature into this unit it would be almost perfect.
The only other thing that would be nice would be a USB rechargeable battery.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Special Project: EVA with Interactive Audio!
Wire splicing it is.
So in a nut shell, whats the deal on the device you gave a link too?
I don't read that language!
Longer audio file capacity, etc?
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
LOL, yeah I don't really read it either.rubherkitty wrote: So in a nut shell, whats the deal on the device you gave a link too?
I don't read that language!
What's good is the huge storage capacity to store a lot more high quality audio, but as it stands, it wouldn't be as good because there's no way to program the playback of the clips. With the programming it would be awesome.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Special Project: EVA with Interactive Audio!
So the playback is random of the 4 clips?
4 push buttons, but you cannot assign a clip to a certain button?
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
With that unit you could only have one clip for each button, so the same clip would play each time you press the same button.rubherkitty wrote:Thanks
So the playback is random of the 4 clips?
4 push buttons, but you cannot assign a clip to a certain button?
The only plus is the clips could be much higher quality and a lot longer.
With the module I have, I can program up to 100 clips for each button using the groups function, so each time you press the same button a different sound byte is played. The caveat is that the number of clips and quality need to be kept to a minimum to fit the limited amount of recording time. However, once a clip is loaded in it can be reused as many times as you want in different groups without adding to the recording time.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Special Project: EVA with Interactive Audio!
Thanks
I'll have to ponder on this application.
Wild sex and a 3 minute monologue don't mix too well.
I guess if you have a audio clip where there are pauses for a response that would work, but it would be a scripted type of thing. Same as I'm already using now via bluetooth speaker. Of course this would allow the doll to be free of the 30' range if a person wanted to take her out on the street for some sex in public type of thing.
Now where was that fetish thread?
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
Lol, yeah. I wouldn't really recommend using that board the way it is.rubherkitty wrote:Wild sex and a 3 minute monologue don't mix too well.
If they could just get the micro SD storage feature into the one I have it would be perfect.
Unfortunately the board would probably get bigger though so it wouldn't fit into the neck anymore.
Moving along today with the button installations.
Nipple buttons are installed, now working on getting the rest stuck in place...
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- Lahfan1970
- Senior Member
- Posts: 254
- Joined: Sun Jan 03, 2016 3:39 pm
- Location: East of the Sun, West of the Moon
- Contact:
Re: Special Project: EVA with Interactive Audio!
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
LOL, yes she's about to get seriously packed today. And she'll like it.Lahfan1970 wrote:She's getting ready for a serious ass-packing. Hope she's that kind of girl!
All buttons and PIR are in place and adapter is ready to go... As a gasket to protect the button, 2 layers of freezer bag plastic were pushed on over the screws on the cap.
I'll use some Permatex to give it a watertight seal to the adapter... Next step will be to create a mold for a thin mound that will go on over the groin button.
Might be nice to give her a little cameltoe that can be fondled.
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- MannequinFan
- Vendor Affiliated
- Posts: 4714
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Special Project: EVA with Interactive Audio!
The opening in the MQ has been reinforced all around with Apoxie Sculpt.
The adapter will be cemented in place with a generous amount of Apoxie Paste.
I used a wad of quick set epoxy putty to give the wiring some strain relief...
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations