Paige Nightmare of Wires
-
- Contributing Poster
- Posts: 26
- Joined: Fri Jul 17, 2015 5:25 pm
- Contact:
Paige Nightmare of Wires
After a week.
A little more than a month later.
-
- Contributing Poster
- Posts: 26
- Joined: Fri Jul 17, 2015 5:25 pm
- Contact:
Re: Paige Nightmare of Wires
Rather than complain about what I got, I am going to start to try and fix it the right way. That said here is what I will be doing for Paige first since she is in the very worst shape. The vagina area!
My first thing to measure was that of the several pocket pussy's I purchased they seem to be at a width of 2 1/2 inches outside diameter to 2 3/4 inches. I am thinking of getting a hole saw about 2 3/4 inches on a power drill. The pocket pussy's have an average approx length of about 4 3/4 inches to just under 5 inches. What I am looking at here is a approach at clearing out just enough material for a slightly loose fit. The inner part I will use the soft expanding wall foam. Then I am thinking silicon, not sure how it will interact with the foam or the cyberskin if there will be any issues here. Once that is dried and holding the pocket pussy in place I am then going to finish the outside with a small wooden coffee stir and the aquaseal which should hold up for a while. Once last thing, I am also considering a loose plastic wrap on the outside of the pocket pussy in case it tears, no need to seep into the foam. This is one fix on the doll. I think this is quite doable, anyone have thoughts on it? I got a pretty thick pocket pussy as they can vary in wall thickness. Once this is set I suspect it will be much more realistic and finally usable.
Anyhow, I am thinking about an hour of repair time here. Any suggestions especially on what I will be using and if you have anything better please let me know. I honestly hate to see these dolls unused sitting here. They both deserve a real chance. Thanks all.
Re: Paige Nightmare of Wires
Bored, certified "plastic" surgeon. Serving the masses.
Dolls i have worked on. Real doll ,JM doll,teddybabes,Anime fabric doll,wm doll, d.s dolls, Diao shi, extravaganza air dolls, 1st pc, and candy8teen dolls.
Need work done? Feel free to send me a note.
Re: Paige Nightmare of Wires
I have said it before and i'll say it again, skeleton is VERY important in a doll.
Re: Paige Nightmare of Wires
TDF: This at very least deserves a Buyer Beware tag. If your gonna give that to MD who puts out dolls 100x times better than that piece of junk then your tag isn't worth the space it takes up.