TPE ball plug?
- bruisedwater
- Newbie
- Posts: 1
- Joined: Fri Nov 23, 2018 1:36 am
- Contact:
TPE ball plug?
- matt gloss
- Doll Mentor
- Posts: 1105
- Joined: Fri Jul 14, 2017 4:19 am
- Location: Fylde coast UK
- Contact:
Re: TPE ball plug?
Any new doll should be inspected this way imo for peace of mind.
ATB
Matt
Re: TPE ball plug?
Some manufacturers have taken this issue seriously, but WM just doesn't seem to give a damn.
Rei - WM 140cm D-cup #39 & #53
Nymph - DH168 80cm "Shiori"
Ku - DS Ex Lite 163cm "Kayla"
Elva & Alva - 6Ye 65cm #M5 "Mina"
Re: TPE ball plug?
Re: TPE ball plug?
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: TPE ball plug?
I've never had a problem with a WM plug. Jinsan makes great quality dolls. That 85cm torso is great. Buy it from a Jinsan and TDF authorized vendor, and you will be fine.
- Dollyman25442
- Doll Mentor
- Posts: 1445
- Joined: Fri Aug 11, 2017 11:30 pm
- Contact:
Re: TPE ball plug?
As many of you know, I do oral cavity mods on WM heads. I've yet to do a face peel where the end of the oral cavity wasn't closed from the mold hole.
Naturally I always close it when I'm performing my modification, but that casting hole is-
A-unsanitary as water will get between the tpe "skin" and the skull eventually growing mold.
B-the primary reason for "eye bulge" syndrome.
Either the manufacturers can solve these casting problems or at some point the US Federal Govt is going to find out (sexual contact with black mold is quite un-good) and that will be the end of doll imports from China.
Manufacturers beware.
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: TPE ball plug?
I know you're doing modifications, but most people are going to have a doll that's not great oral.
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: TPE ball plug?
- Dollyman25442
- Doll Mentor
- Posts: 1445
- Joined: Fri Aug 11, 2017 11:30 pm
- Contact:
Re: TPE ball plug?
I would buy somegrimreefer24601 wrote:Hands are still the big problem. I'm seeing if I can get a metal fabricator to make CC's old hand plates. It'll depend on price.
-
- Active Member
- Posts: 165
- Joined: Fri Sep 24, 2021 3:24 pm
- Contact:
Re: TPE ball plug?
Dollyman25442 wrote:Actually, the bigger question (and the elephant in the room) is the oral cavity plug.
As many of you know, I do oral cavity mods on WM heads. I've yet to do a face peel where the end of the oral cavity wasn't closed from the mold hole.
Naturally I always close it when I'm performing my modification, but that casting hole is-
A-unsanitary as water will get between the tpe "skin" and the skull eventually growing mold.
B-the primary reason for "eye bulge" syndrome.
Either the manufacturers can solve these casting problems or at some point the US Federal Govt is going to find out (sexual contact with black mold is quite un-good) and that will be the end of doll imports from China.
Manufacturers beware.
can you say more about how to fix the mouths so they are clean?
- Dollyman25442
- Doll Mentor
- Posts: 1445
- Joined: Fri Aug 11, 2017 11:30 pm
- Contact:
Re: TPE ball plug?
Well that's opening up a can of worms to be sure.goodfruits wrote:Dollyman25442 wrote:Actually, the bigger question (and the elephant in the room) is the oral cavity plug.
As many of you know, I do oral cavity mods on WM heads. I've yet to do a face peel where the end of the oral cavity wasn't closed from the mold hole.
Naturally I always close it when I'm performing my modification, but that casting hole is-
A-unsanitary as water will get between the tpe "skin" and the skull eventually growing mold.
B-the primary reason for "eye bulge" syndrome.
Either the manufacturers can solve these casting problems or at some point the US Federal Govt is going to find out (sexual contact with black mold is quite un-good) and that will be the end of doll imports from China.
Manufacturers beware.
can you say more about how to fix the mouths so they are clean?
First and foremost is either making sure the plug in the back of the oral cavity is in fact plugged or repair it. Since that cavity is quite a bit tighter than the vaginal cavity, it's a repair that's very tricky. With the vaginal cavity tpe ball plug, you can just shove your whole (Vaseline lubricated) hand inside and re-fit a plug. Not so with the oral cavity. I've never actually repaired one in situ but only when I've done a face peel as part of the oral mods I used to do (find the thread).
I suppose anyone could do a face peel and make the repair but if one were doing that, I'd find my old thread and simply do my complete oral mod to improve the oral capability as you'd have a third of that mod done just by doing a face peel to plug the casting hole.
All that said, a femdom with Vaseline could be used when doing oral and that would circumvent the need to clean the oral cavity which is true for the vaginal cavity as well. Remember, the reason to clean in the first place is to prevent mold growth. If you use a femdom, no water based fluids (sperm) are going to come in contact with the tpe surfaces and Vaseline being a non water based lubricant won't allow mold growth. Vaseline is also easily re-upped by tpe so there's no need to clean the cavities of Vaseline.
While that's a solution, it's imperfect at best. Using a femdom with Vaseline for the vaginal cavity isn't a killjoy, but it can be with oral.
Oh and as an aside don't let the armchair rocket scientists pontificate a femdom feeling like a "baggie" on the dingus. They obviously have preconceived notions. I can say with personal experience, you hardly notice them in use. Not at all like a standard condom (which btw can't be used with Vaseline therefore defeating the entire purpose) which are constrictive and very intrusive (feeling).
Personally, I've forsaken oral with all my unmodified dolls as the cavity unmodified is unsatisfactory (reads way to constrictive) in virtually every doll I've ever owned (currently have six).
At the end of the day, if you truly must have oral with your doll, probably the only way that will ever be satisfactory and sanitary is to do my mod (and repair the casting hole at the same time, a standard I performed with every single mod I ever did either for my own use of for others).
Re: TPE ball plug?
bruisedwater wrote:Has the issue regarding the loose vaginal ball plug in tpe dolls been fixed or is it still an issue? I'm asking because i'm interested in the 85cm torso doll, but I don't know if it has the tpe ball or not.
Official website: www.wmdolls.com
Professional tpe doll pioneer.
WM Tech.:
Real Oral Sex (ROS)
Ball Jointed Hand Skeleton
Breathing Feature
Anti-counterfeiting code query system
-
- Active Member
- Posts: 165
- Joined: Fri Sep 24, 2021 3:24 pm
- Contact:
Re: TPE ball plug?
Dollyman25442 wrote:Well that's opening up a can of worms to be sure.goodfruits wrote:Dollyman25442 wrote:Actually, the bigger question (and the elephant in the room) is the oral cavity plug.
As many of you know, I do oral cavity mods on WM heads. I've yet to do a face peel where the end of the oral cavity wasn't closed from the mold hole.
Naturally I always close it when I'm performing my modification, but that casting hole is-
A-unsanitary as water will get between the tpe "skin" and the skull eventually growing mold.
B-the primary reason for "eye bulge" syndrome.
Either the manufacturers can solve these casting problems or at some point the US Federal Govt is going to find out (sexual contact with black mold is quite un-good) and that will be the end of doll imports from China.
Manufacturers beware.
can you say more about how to fix the mouths so they are clean?
First and foremost is either making sure the plug in the back of the oral cavity is in fact plugged or repair it. Since that cavity is quite a bit tighter than the vaginal cavity, it's a repair that's very tricky. With the vaginal cavity tpe ball plug, you can just shove your whole (Vaseline lubricated) hand inside and re-fit a plug. Not so with the oral cavity. I've never actually repaired one in situ but only when I've done a face peel as part of the oral mods I used to do (find the thread).
I suppose anyone could do a face peel and make the repair but if one were doing that, I'd find my old thread and simply do my complete oral mod to improve the oral capability as you'd have a third of that mod done just by doing a face peel to plug the casting hole.
All that said, a femdom with Vaseline could be used when doing oral and that would circumvent the need to clean the oral cavity which is true for the vaginal cavity as well. Remember, the reason to clean in the first place is to prevent mold growth. If you use a femdom, no water based fluids (sperm) are going to come in contact with the tpe surfaces and Vaseline being a non water based lubricant won't allow mold growth. Vaseline is also easily re-upped by tpe so there's no need to clean the cavities of Vaseline.
While that's a solution, it's imperfect at best. Using a femdom with Vaseline for the vaginal cavity isn't a killjoy, but it can be with oral.
Oh and as an aside don't let the armchair rocket scientists pontificate a femdom feeling like a "baggie" on the dingus. They obviously have preconceived notions. I can say with personal experience, you hardly notice them in use. Not at all like a standard condom (which btw can't be used with Vaseline therefore defeating the entire purpose) which are constrictive and very intrusive (feeling).
Personally, I've forsaken oral with all my unmodified dolls as the cavity unmodified is unsatisfactory (reads way to constrictive) in virtually every doll I've ever owned (currently have six).
At the end of the day, if you truly must have oral with your doll, probably the only way that will ever be satisfactory and sanitary is to do my mod (and repair the casting hole at the same time, a standard I performed with every single mod I ever did either for my own use of for others).
- silicon
- Doll Elder
- Posts: 3446
- Joined: Sun Jul 19, 2015 7:56 pm
- Location: South East England UK
- Contact: