Will it fit in her mouth?
Will it fit in her mouth?
- Broven
- Doll Patriarch
- Posts: 4225
- Joined: Sun Aug 20, 2017 6:26 pm
- Location: The Mitten State
- Contact:
Re: Will it fit in her mouth?
"You're my blue sky. You're my sunny day." - Dickey Betts
Anna Marie and Friends (Thindoll 162A-36)
February 2019 Coverdoll photo shoot
- Stewie studmuffin
- Doll Oracle
- Posts: 9105
- Joined: Sat Apr 23, 2016 12:47 am
- Location: Southside Virginia. A place where the men are men and the horses are nervous.
- Contact:
Re: Will it fit in her mouth?
Girlfriends are for guys who haven't found the right doll yet.
I feel much better now that I've given up hope.
Re: Will it fit in her mouth?
Worth noting however is that WM has several different designs to their heads. I have a #53 as well which is a lot tighter due to a tongue that is molded inside her mouth, while my #39 is more open and came with a loose tongue that could be set in place or skipped. Then there are also the more advanced versions with the enhanced oral experience, which I personally know nothing about yet. There might be more variants as well that are unique to specific heads. I have no idea about the #20 unfortunately.
Rei - WM 140cm D-cup #39 & #53
Nymph - DH168 80cm "Shiori"
Ku - DS Ex Lite 163cm "Kayla"
Elva & Alva - 6Ye 65cm #M5 "Mina"
- The Romantic
- Doll Mentor
- Posts: 1817
- Joined: Mon Dec 08, 2014 10:37 am
- Location: West MI
- Contact:
Re: Will it fit in her mouth?
- BluWolf
- Active Member
- Posts: 107
- Joined: Wed Dec 13, 2017 12:04 pm
- Location: Colorado Springs, colorado
- Contact:
Re: Will it fit in her mouth?
Broven wrote:I've had oral from my WM 140cm with head #36 several times. I'm average in size myself and it hasn't been a problem. I'm nervous to do it too often for the reasons you mentioned. And oral with these WM dolls causes their eyes to bulge out, so it's a little weird looking anyway. I usually try to brush her hair into her face to hide her eyes as best I can, but when you're done her eyes stay bugged out until you push them back in. It makes her look VERY surprised. lol
has her eyes even popped out of there sockets. after reading your post i could not stop every time i think about it. the thought of the eyes bulging out just cracks me up
- puma uma
- Doll Elder
- Posts: 2097
- Joined: Sat Oct 19, 2013 4:06 pm
- Location: ex member/I quit.
- Contact:
Re: Will it fit in her mouth?
http://www.dollalbum.com/dollgallery/in ... ?cat=14528
my doll album
Re: Will it fit in her mouth?
- deerman
- ~ Member ~
- Posts: 8376
- Joined: Wed Jan 11, 2012 10:52 am
- Location: Just past the pond, the last deer trail on the left
Re: Will it fit in her mouth?
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Will it fit in her mouth?
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
Re: Will it fit in her mouth?
There was a recent thread on here ("Give me Head" or something) where the poster was doing surgery to the "skull" to open the fiberglass (?) skull structure up inside. I think there has to be an easy change that can come from the manufacturers, and make them LOTS of MONEY. Hear that Manufacturers? This is my idea-
The skull structure looks like it's a "bubble" of some resin or FG that is blown in a mold, to give it it's shape. It has a lower "jaw" support structure, but no upper jaw. This allows the roof of mouth to stretch outward to accept your, um.. whatever you're pushing in there. But this causes her face to distort unnaturally and is worse with smaller heads, even though they usually have the same 5.1" depth as larger heads. RD has a flexible lower jaw system and mouth/throat inserts, but I can't afford a $6000 doll. So my wish is that manufacturers eliminate the lower "jaw" and put an upper jaw in. At least something across the cheek bones. This would keep the face's shape, with no distortion of her pretty eyes and nose. With no FG in the lower face the mouth will now stretch Down, much more realistically. It would look much more realistic if you saw it from the side, but you'll actually be above her and just see her cheek puffing out. VERY realistic in my mind. And looking at the naked skull, I think it would be just as easy to manufacture.
It would just take a manufacturer to make the new design and skins for it (with current hollow chins now being solid TPE, and upper jaw opened up for cheek structure to fit). It would be totally different than the current standard, but the same costs to manufacture once the molds were created. And I think they would sell like crazy.
I'd crowd fund that for sure.
Aiko 63 (×2)
Aiko 82
Dollhouse168 80cm
CLM J55
CLM J58 BBW
CLM J60P
CLM 72cm BBW Maria
CLM 100cm D cup Una Kane (w/ Una Carha head)
WM 039 Head
WM 355 Elf Head
WM 432 Head w/ ROS option (disappointing)
WM 100cm D cup Carmelita
WM M cup Torso
Piperdoll 75cm Ariel Torso
Piperdoll 75cm Akira Torso
Piperdoll 80cm Phoebe Elf TPE
Piperdoll 100cm Iris
MRL Torso (small w/penetratable nipples)
MF Easy Move Eyes
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Will it fit in her mouth?
I'd second that! I my opinion, this really cannot be that complicated...well if you do it pre-TPE casting at least...Maxwedge wrote:Yes, it was a MAJOR turn off for me. Now cheeks puffed out, eyes wide would be cute/hot, but eyeballs coming out of the sockets and the nose stretching up like the transformation in American Werewolf in London?? Not hot. Bone killer.
There was a recent thread on here ("Give me Head" or something) where the poster was doing surgery to the "skull" to open the fiberglass (?) skull structure up inside. I think there has to be an easy change that can come from the manufacturers, and make them LOTS of MONEY. Hear that Manufacturers? This is my idea-
The skull structure looks like it's a "bubble" of some resin or FG that is blown in a mold, to give it it's shape. It has a lower "jaw" support structure, but no upper jaw. This allows the roof of mouth to stretch outward to accept your, um.. whatever you're pushing in there. But this causes her face to distort unnaturally and is worse with smaller heads, even though they usually have the same 5.1" depth as larger heads. RD has a flexible lower jaw system and mouth/throat inserts, but I can't afford a $6000 doll. So my wish is that manufacturers eliminate the lower "jaw" and put an upper jaw in. At least something across the cheek bones. This would keep the face's shape, with no distortion of her pretty eyes and nose. With no FG in the lower face the mouth will now stretch Down, much more realistically. It would look much more realistic if you saw it from the side, but you'll actually be above her and just see her cheek puffing out. VERY realistic in my mind. And looking at the naked skull, I think it would be just as easy to manufacture.
It would just take a manufacturer to make the new design and skins for it (with current hollow chins now being solid TPE, and upper jaw opened up for cheek structure to fit). It would be totally different than the current standard, but the same costs to manufacture once the molds were created. And I think they would sell like crazy.
I'd crowd fund that for sure.
Let me assure you, manufacturer that reads this, that if you are the company that puts heads out like these, you'll be my no1 head supplier starting that day!
Saw that mod thread as well btw, but man, I don't want to be doing that...
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
Re: Will it fit in her mouth?
Yeah, I'm pretty handy / mechanical but I don't want to risk ruining a perfectly good head. We recently crowd-funded two new products from Climax dolls. I wonder if they would make us a new skull design, with 2 or 3 different faces to start with. If they sell out I'm sure they'd add more faces to the line.avante wrote:I'd second that! I my opinion, this really cannot be that complicated...well if you do it pre-TPE casting at least...
Let me assure you, manufacturer that reads this, that if you are the company that puts heads out like these, you'll be my no1 head supplier starting that day!
Saw that mod thread as well btw, but man, I don't want to be doing that...
Aiko 63 (×2)
Aiko 82
Dollhouse168 80cm
CLM J55
CLM J58 BBW
CLM J60P
CLM 72cm BBW Maria
CLM 100cm D cup Una Kane (w/ Una Carha head)
WM 039 Head
WM 355 Elf Head
WM 432 Head w/ ROS option (disappointing)
WM 100cm D cup Carmelita
WM M cup Torso
Piperdoll 75cm Ariel Torso
Piperdoll 75cm Akira Torso
Piperdoll 80cm Phoebe Elf TPE
Piperdoll 100cm Iris
MRL Torso (small w/penetratable nipples)
MF Easy Move Eyes
- DollLove86
- Active Member
- Posts: 109
- Joined: Fri May 26, 2017 8:04 am
- Contact:
Re: Will it fit in her mouth?
Re: Will it fit in her mouth?
DollLove86 wrote:I also have head 20 and the oral is fantastic, I also have 2 oral videos at my pornhub like below with wm140 head 20 if you dare to watch. Keep it lubed ad wet also it helps if you slide a finger in after to release any air after you insert your member
Thanks DollLove86 Now that the holidays are here, I'll have to wait until they are over, before I can have a little "treat" for myself.