best pump for drying insert cavity?

noxster · Post by **noxster** » Mon Jan 28, 2019 9:09 pm

which pumps do you guys use?

which material does the hose need to be made out of?

how much power does the pump need? (aquarium pump for 10, 25, 50 gallons?)

anyone use a mattress pump? is the mattress pump a risk because it can overheat in 10 minutes?

manintehbox · Post by **manintehbox** » Mon Jan 28, 2019 9:18 pm

I plan to use a mattress pump, Bought a speculum that can be locked open and bottle cleaning brushes to soak up water first, then blow air up there. At least that's my plan, haven't had the chance to use my cleaning protocol. No perfection,but it is mixing what I have read from peeps here. That's even if I use her for the "intended" purpose. I don't think I will be able to resist the intended purpose though noxster.

manintehbox · Post by **manintehbox** » Mon Jan 28, 2019 9:29 pm

https://www.amazon.com/gp/product/B071P ... UTF8&psc=1

https://www.amazon.com/gp/product/B00TI ... UTF8&psc=1

Links for the brushes and speculum.

The mattress blower would definitely be kept out of love holes, just outside to blow air in. I can't confirm the TPE ball situation has been taken care of by MFRs, which a huge air flow directly could mess that up. I think that is why aquarium pumps have failed some. Not letting the air to leave the area freely. I'm sure experienced peeps will chime in though.

edit: if women complain about buying tampons, i couldn't imagine buying tampons like she is a red river 24/7/365. Because that is recommended as a drying tool.

LaDollyVita · Post by **LaDollyVita** » Mon Jan 28, 2019 10:23 pm

Aquarium pumps advertised for 10 gallon tanks work just fine. I've not had any issues with the clear plastic tubing that typically is sold alongside these. If you notice any discoloration, which varies depending on how hard or or soft your water is, trim, or replace.

If you have multiple dolls or inserts, and enjoy afternoon delight frequently, consider getting a pump that has two air nozzles for double duty!

noxster · Post by **noxster** » Tue Jan 29, 2019 2:27 am

manintehbox wrote:https://www.amazon.com/gp/product/B071P ... UTF8&psc=1

https://www.amazon.com/gp/product/B00TI ... UTF8&psc=1

Links for the brushes and speculum.

The mattress blower would definitely be kept out of love holes, just outside to blow air in. I can't confirm the TPE ball situation has been taken care of by MFRs, which a huge air flow directly could mess that up. I think that is why aquarium pumps have failed some. Not letting the air to leave the area freely. I'm sure experienced peeps will chime in though.

edit: if women complain about buying tampons, i couldn't imagine buying tampons like she is a red river 24/7/365. Because that is recommended as a drying tool.

Neat brushes I saw those on another doll site and wanted one but didn't know the right tag to search for them. I was planning on using these for washing:

https://www.amazon.com/dp/B07B8ZCLXV/?c ... dp_it&th=1

and these for drying:

https://www.amazon.com/dp/B00SENQIU6/?c ... _lig_dp_it

So that speculum locks?? I can't believe I didn't think of trying that...

What ball situation are you talking about? I don't understand...

noxster · Post by **noxster** » Tue Jan 29, 2019 2:29 am

LaDollyVita wrote:Aquarium pumps advertised for 10 gallon tanks work just fine. I've not had any issues with the clear plastic tubing that typically is sold alongside these. If you notice any discoloration, which varies depending on how hard or or soft your water is, trim, or replace.

If you have multiple dolls or inserts, and enjoy afternoon delight frequently, consider getting a pump that has two air nozzles for double duty!

How would trimming it help prevent discoloration? Do I have to spread the legs so the cavity gapes then blow air in there?

Jab · Post by **Jab** » Tue Jan 29, 2019 7:53 am

On my doll which is plat sil, I use two of these.

https://www.amazon.com/Uniclife-Aquariu ... rium+Pumps

Jab.

NewFrontiers · Post by **NewFrontiers** » Wed Mar 06, 2019 6:54 pm

Jab wrote:On my doll which is plat sil, I use two of these.

https://www.amazon.com/Uniclife-Aquariu ... rium+Pumps

Jab.

Just curious. Why did you need two pumps?

gonestill77 · Post by **gonestill77** » Wed Mar 06, 2019 7:26 pm

Don't know if this helps but, I have a silicone lady with a built in vagina.
When it comes to drying her, I use an electric airbed mattress pump I got at Kmart for like 12 bucks. Before that, I used a mini table top fan between her legs.
The fan took an hour.
The airbed pump takes 20 minutes. I have not had a problem with it overheating.

Dutch Dance Maniac · Post by **Dutch Dance Maniac** » Thu Mar 07, 2019 11:24 am

: MVIMG_20190302_172034.jpg (200.29 KiB) Viewed 4905 times

I used this air brush compressor last 3 month's for the fixed vagina drying process, let it run for 15 to 30 minutes and all moisture has disappeared becouse off the very good air circulation inside...

Since last week i use femidoms so i don't need the compressor anymore now but it worked perfectly for the air circulation process.
Yes it Sounds crazy using a compressor but it was just an leftover from a previous hobby and I found out that it would do the same job as an aquaruim pump would do. Blow air in where it was needed.......

Greetings from the Netherlands, DDM, Timea, Daisy & Mariëlle.

noxster · Post by **noxster** » Fri Mar 08, 2019 2:28 pm

I ended up getting an aquarium pump from Amazon, I will let you guys know how well it works and which one I got once I try it.

Fantastic Plastic · Post by **Fantastic Plastic** » Fri Mar 08, 2019 3:57 pm

My favorite and only aquarium pump for that matter is this little USB powered one.
It’s completely silent and pumps enough air to dry a built-in in a few hours.
I sometimes just leave it overnight.

: 7097E322-1F39-4E80-8D53-B6094079F9A6.jpeg (1.43 MiB) Viewed 4871 times

Jab · Post by **Jab** » Fri Mar 08, 2019 5:59 pm

NewFrontiers wrote:
Jab wrote:On my doll which is plat sil, I use two of these.

https://www.amazon.com/Uniclife-Aquariu ... rium+Pumps

Jab.
Just curious. Why did you need two pumps?

Just saw your question. 3 off my head reasons, 1. more drying power but subtle.
2. With 4 hoses/nozzles, you can set the depth of how far you want in the orifice quite effectively.
Two all the way in, slightly pulled back for airflow, drying deep, another in the middle, one near the entrance. Done right, about 15-20 minutes dry.

3. I have an unlucky streak for smaller frivolous purchases. A nozzle broke on my 1st pump.
Decided to buy two more pumps to "combat that streak". lol
Nother example is universal usb charge cords, always breaking them, no matter how careful.

Jab.

noxster · Post by **noxster** » Tue Mar 12, 2019 8:02 am

I just tested the pump I bought, not on the doll but just to see if it works and it blows a very weak stream of air. Is it supposed to be that weak for it to dry the doll effectively or did I get the wrong kind of pump for the job?

Scrublord · Post by **Scrublord** » Tue Mar 12, 2019 8:33 am

I've got an electric airbed pump (fairly powerful). Would that be okay - provided I placed it a short distance away...or even stood the doll upright and place it on the floor underneath?