Page 7 of 13

Re: TPE Honeymoon guide for new doll owners

Posted: Wed Jun 28, 2017 8:22 pm
by lilbitlonely
Stepford_CT wrote:...The main problem with blowing air into the cavity is having a way for the air to escape. Either the legs need to be spread or a second hose is needed in order to allow moisture-laden air to escape...
I solved this problem by first inserting about a 3" length (of 1" diameter) clear plastic tubing into the entry. I then insert the small fish-tank pump air-tubes through the larger 1" tube. This allows air to freely circulate within, and then exit the orifices. Seems to work well.

THE DAY OF ARRIVAL

Posted: Sat Jul 08, 2017 11:13 am
by Booty Call Dolls
Please keep the care and cleaning of your TPE doll as simple as possible.

The first day of your TPE doll is the most important day.
Wash the doll 5-6 times for removing the production residues.
That stuff is unhealthy and you should remove it.
Afterwards do a mineral oil treatment, let it absorb and then do the powdering.
Let the doll rest for the night.
The first mineral oil treatment and powdering are working over night (binding left residues).
Next day, wash off the powder, do the mineral oil treatment again, let it absorb and then again the powdering.
Indigo20 page 27 of 28 of ????

MORE TIPS FOR LARGER AREOLAS

Posted: Sat Jul 29, 2017 8:20 pm
by Booty Call Dolls
https://www.dollforum.com/forum/viewtop ... 1#p1143391
DO11 was kind enough to give me permission to use hos pictures too!

Re: TPE Honeymoon guide for new doll owners

Posted: Sun Jul 30, 2017 4:48 am
by bentone
Booty Call Dolls wrote:A great quote I know of is
"Learn from the mistakes of others since you will not have time to make them all yourself"
I am sure some of can remember our 1st doll arriving....
We know we made mistakes, so let's pass them on so we can avoid a repeat in history.
Some people have hurt their backs unpacking the doll on day 1.
Any good pointers on this?
Others have caused vagina tears by perhaps not putting in inserts the best way.
Any good pointers on this?
Attached is my guide I send to my new doll owners, but it can of course be improved, right?
If you see something in it, you do not agree with, please PM me.
One thing I still believe in from my 20 years in the military, you praise in public, punish in private.
Like my Chief use to say. "Let's get her done!"
BCD
Thanks for the info. I will definitely follow the instructions when my doll arrive. Awesome!!

NEED NEW EYEBROWS?

Posted: Tue Aug 01, 2017 11:03 pm
by Booty Call Dolls
viewtopic.php?f=229&t=81246
Check out above for a couple great ideas!
Jeff and the BCD Girls
"We turn dreams into reality"

BEST METHOD FOR TPE GLUE?

Posted: Sat Aug 19, 2017 10:04 pm
by Booty Call Dolls
First of all, please note that Jinsan TPE glue is made to work on Jinsan TPE. This be true, it might not work on a Climax doll for example.
Please note that I am not saying this method is better than others, it is just different, but I feel at this point in time, it is the best SOP ( standard operating procedure) out there.

FACT-
The cut has no loss of TPE material and in stretched position it is a thin line.
RECOMMENDATION-
Do the repair with the original WM doll TPE glue.
WHY?
The doll is a WM doll and there is no loss of material

TPE must be welded together and the TPE glue is a cold-welding adhesive.

The repair:

Keep the arm in stretched position and do a mineral oil saturation, because the elbow is a high stressed area.
Use baby oil (containing mineral oil) for doing the saturation.
We recommend 3 thin applications of baby oil, every day one application .
We recommend to open the cut with the fingers and to wipe out some dirt carefully inside the cut with the baby oil and a paper towel.
Please no alcohol.
The baby oil removes dirt and is absorbed afterwards.

On the fourth day, do the repair.

Apply a little bit baby oil around the cut, not inside.
Open the cut with your fingers.
With the other hand and a paint brush apply TPE glue inside the opened cut.
Close the cut and hold it a bit together.
Squeezed out TPE glue can be wiped away carefully with a Q-tip or paper towel.
That is the reason why we have baby oil around the cut.
TPE glue that is squeezed out and wiped away that way is not causing damage on the surface
Please note that I am not saying this method is better than others, it is just different, but I feel at this point in time, it is the best SOP ( standard operating procedure) out there.
FACT-
The cut has no loss of TPE material and in stretched position it is a thin line.
RECOMMENDATION-
Do the repair with the original WM doll TPE glue.
WHY?
The doll is a WM doll and there is no loss of material

TPE must be welded together and the TPE glue is a cold-welding adhesive.

The repair:

Keep the arm in stretched position and do a mineral oil saturation, because the elbow is a high stressed area.
Use baby oil (containing mineral oil) for doing the saturation.
We recommend 3 thin applications of baby oil, every day one application .
We recommend to open the cut with the fingers and to wipe out some dirt carefully inside the cut with the baby oil and a paper towel.
Please no alcohol.
The baby oil removes dirt and is absorbed afterwards.

On the fourth day, do the repair.

Apply a little bit baby oil around the cut, not inside.
Open the cut with your fingers.
With the other hand and a paint brush apply TPE glue inside the opened cut.
Close the cut and hold it a bit together.
Squeezed out TPE glue can be wiped away carefully with a Q-tip or paper towel.
That is the reason why we have baby oil around the cut.
TPE glue that is squeezed out and wiped away that way is not causing damage on the surface

FACE LIFT tip to remove wrinkles

Posted: Sat Aug 19, 2017 10:06 pm
by Booty Call Dolls

Finger repair?

Posted: Thu Sep 14, 2017 7:27 pm
by Booty Call Dolls

Shoes, shoes, shoes

Posted: Sun Oct 01, 2017 7:37 pm
by Booty Call Dolls
Yeah, foot size was important to me, too. 21.5cm is a US size 5. I've found tons of sexy heels on Amazon in that size. Here's a conversion chart to figure size from cm length..... https://www.shoesizingcharts.com/
Image

Re: TPE Honeymoon guide for new doll owners

Posted: Mon Oct 02, 2017 6:20 am
by Awesome Alligator
When you’re doing the oil treatments and you are putting the oil or vasaline inside the doll’s cavaties what do you use to apply the oil up inside? I can think of one way but it would probably just lead to needing another cleaning :oops:

Re: TPE Honeymoon guide for new doll owners

Posted: Sat Dec 09, 2017 12:19 pm
by PALO35
wow, learned a lot from this thread... thanks for sharing these valuable info to us :)

Re: TPE Honeymoon guide for new doll owners

Posted: Sat Dec 09, 2017 1:44 pm
by Stepford_CT
Awesome Alligator wrote:When you’re doing the oil treatments and you are putting the oil or vasaline inside the doll’s cavaties what do you use to apply the oil up inside? I can think of one way but it would probably just lead to needing another cleaning :oops:
I use my finger.

Re: TPE Honeymoon guide for new doll owners

Posted: Sun Dec 24, 2017 9:11 pm
by Zippy81
Hey Charlie what type of doll is that? TPE? Real doll? Skintone? And where is the best place to get the gloves and body stockings? Thanks.

Re: TPE Honeymoon guide for new doll owners

Posted: Mon Jan 08, 2018 5:48 pm
by Booty Call Dolls
Make sure if you like to KISS us alot that you do not forget to keep our mouths dry ELSE mold can grow
Love,
Nyoko, Jeff's YL 148

HEAT GUN INFORMATION

Posted: Thu Jan 11, 2018 6:08 am
by Booty Call Dolls