My petite 34 166A with heads number 7 and 53. review.

[Dollsampler]

The doll arrived safely in her box and hopefuly Nothing was damaged.The neck is hinged and two 166 WMdoll models I received previously with their goose necks were slightly damaged (one spiraled turn part is oversized in diameter because it was overpressured during shipping)

Here you see the box upon opening.

P1020493.JPG (2.1 MiB) Viewed 2413 times

Here the body with head 53 is ready to jump out of the box.

P1020494.JPG (2.23 MiB) Viewed 2413 times

P1020495.JPG (2.33 MiB) Viewed 2413 times

However, my old house staircase beeing 200 years old now that I am equiped with a stair climbing chair it is an easy work to move the doll to the first floor

P1020492.JPG (3.1 MiB) Viewed 2413 times

.

You can see this operation on the following pictures.

P1020496.JPG (1.87 MiB) Viewed 2413 times

P1020497.JPG (2.33 MiB) Viewed 2413 times

AS USUAL 6YE HEADS SEEM ALIVE:
HEAD 53
Head number 53, japanese style, is very realistic and like many 6YE heads look generaly more alive than heads of other brands.

P1020561.JPG (3.16 MiB) Viewed 2413 times

However, that head 53 is on the low size of 20cm in height ( from top head to chin) in the standard range (20-22cm)

P1020562.JPG (2.41 MiB) Viewed 2413 times

This head point to a teen size and add only 15cm to the body without head.Altough here the 166A is an European size 34 that is quite thin, she has an adult height and even head 53 needs a wig with some volume in order not to appear too small.

HEAD 7
On the other hand head 7 is pretty adult in size and like the previous one full of a youthful life.
"To see her is to love her" as I wrote in a post when I saw her for the first time.
Her size is perfect for this thin but tall body.
This head (22cm from top head to chin) is on the lower range of the adults head (22-24cm) and add 17 cm to the height without head.

P1020564.JPG (2.44 MiB) Viewed 2413 times

THE MEASUREMENTS:

HEIGHT: Body without head (measured with the body laying on the back ) from M16 nut entry to heel 151CM
HEIGHT With head 53 166CM
HEIGHT with head 7 168CM

Shoulders WIDTH 34cm (qualify for an European 34 size)
Waist WIDTH 17cm
Hips WIDTH 30cm (good value related to the shoulders width)

Bust LINE 69cm
Underbust LINE 57cm (qualify for an European A cup small)
Waist LINE 53cm (acceptable value considering the hipsline is only 82cm)
Hips LINE 82cm (qualify for an European 34 size)

Legs LENGHT measured inner thigh from crotch to heel 82cm.

X FACTOR: very good

The height beeing 168cm the Xfactor (ratio legs lenght to total height) equal 0.488 which is in the top model range.

Y FACTOR: quite poor

Thigh lenght (from crotch to knee joint) 30cm (that is quite short)
Calve lenght (from knee joint to heel) 52cm (that is quite long)
So the Yfactor (ratio thigh to calve lenght) is 0.58. The realistic value should be near 0.80 so here also (same case as two 166cm from another brand I reviewed recently side by side) calves are too long compared to thigh.

This poor Yfactor is unfortunately a rule in the design of a great majority of the dolls (sparing weight and adding a high heel shoes aspect to the calves).
Nevertheless I have already found some dolls with very sexy legs having realistic Yfactors.

thigh CIRCUM 43cm (qualify for an European size 34)
calve CIRCUM 29cm (good circumference considering the 43cm thigh circum.)

WEIGHT: The body with head weight 32 kgs. That is very easy to manipulate when one is accustomed with tall dolls of more than 40 kgs.

So this model is a thin European size N 34 body with the 168cm western average adult European height. The body has realistic ratios except the calves to thigh ratio which could be improved without adding much weight.

[Dollbabsown]

Congratulations on your 166A!
Also find her with tan very attractive.
I never recorded her measurements.
I just love her petite, which I love.
Hope you will get a lot of pleasure from this lady.
After a year I am still very satisfied with my 166A.

[Dollsampler]

So now let us look at the standing body silhouette lightly dressed then naked

P1020576.JPG (2.35 MiB) Viewed 2245 times

P1020577.JPG (2.33 MiB) Viewed 2245 times

P1020578.JPG (2.35 MiB) Viewed 2245 times

P1020579.JPG (2.01 MiB) Viewed 2245 times

here is a detail of her private parts seen from behind in standing position

P1020580.JPG (2.25 MiB) Viewed 2245 times

P1020581.JPG (2.28 MiB) Viewed 2245 times

P1020582.JPG (2.15 MiB) Viewed 2245 times

As can be seen the silhouette of this thin n34 is very realistic because most body ratios are correct.

[Dollarhyde]

Congrats DS she looks fantastic...

[Dollsampler]

Let us now have a look closer on her private parts in various positions.
Please note that this model HAS A REMOVABLE VAGINA.
As here the insert has a quite large diameter and IS NOT GAPING OPEN at the outer extremity, the lower labias are pushed apart and the insert end shows itself between them. That design is fuly similar with the parts of a real woman except that the lower labias hide the vaginal entry until they are pushed apart.


The volume and sculpt of the vagina are good except that on one side part of the lower labia is missing. Some other menbers have already complained about that for other models. Personaly I can live with that as it is only visible at a close distance and can be easily repaired if needed (using the labia of a toy hotwelded, as an example)

P1020583.JPG (2.47 MiB) Viewed 2234 times

P1020584.JPG (2.45 MiB) Viewed 2234 times

P1020585.JPG (2.74 MiB) Viewed 2234 times

P1020587.JPG (2.37 MiB) Viewed 2234 times

P1020589.JPG (2.91 MiB) Viewed 2234 times

Here in doggy position, the hips width increase a lot (I measured 36cm which is more than a N36 (hipsline 85cm) and equal to a N38 (hipsline 90cm)
To be also noted: the PERFECT SCULPT AND CLOSED ASPECT OF THE ANAL HOLE

P1020590.JPG (2.51 MiB) Viewed 2234 times

P1020591.JPG (2.47 MiB) Viewed 2234 times

SOME IMPROVEMENTS MADE BY 6YE:
Comparatively to the two models I bought in 2018 I have noted the Following improvements made by the manufacturer:
1. The legs (I selected thigh joints) can be locked straight in a stable manner at the level of the knee ball-joints.. Still, the legs of other brands with hinged knee joints have a better aspect.
2. The standing bolts which had a 5 mm (M5) diameter are now heavy duty at 8 mm(M8)
3. The quick head coupling is more stable than some others brands and the M16 nut beeing fitted as the lower part therein any other M16 heads (screwed) may be used.

The TPE is very soft like usual and the solid A breasts are therefore very realistic at cudling. There was no more the special fruty smell of the last year models.

[Booty Call Dolls]

Nice job!
Did you get the newest TPE blend?
Jeff

[Dollsampler]

In order to give you an idea of the thicknesses related to various European sizes model having the same height, here is a picture of 4 tall dolls together including of course the N34 one reviewed here.
.
The far left one is a 166C measuring 168cm with a quite fantasist body inspired by the N 36 size (shoulders width 36cm, hipsline 84cm, thigh circum 46cm)
The second on left is a 166B measuring 169cm with a quite realistic body with the N 36 size (shoulders width 36cm, waistline 57cm hipsline 85cm, thigh circum 47cm)

The one at the center featuring a mixed version of Lara Croft is labeled 170D now (but is in reality 3cm shorter on the picture) with a fully realistic (even the legs XF and YF are correct) body with the N 38-40 size. This body has the dimensions of Angelina Jolie when at 26 years old she featured Lara Croft (Shoulders width 38cm ,B.W.H lines: 88 62 90plus, thigh circum 52cm)

On the right the N 34 6YE 166A is thin but not excessively even when compared with the N38-40 of the center.

P1020575.JPG (2.27 MiB) Viewed 2150 times

[Dollsampler]

Nice job!
Did you get the newest TPE blend?
Jeff

Yes that is the newest TPE blend. Altough it dont need oiling I did it in order to reduce smell after two weeks.


If you want to see how the private parts look when lying on bed, here is a picture with the insert in.

P1020592.JPG (2.23 MiB) Viewed 2076 times

But hereunder more interesting is the aspect in doggy position with the insert removed. It is easy to see that the positioning is anatomy correct and the lower labia (even with legs apart) close the vaginal entry as on a real woman. That way her butt is eroticaly more esthetic.Look at the 36cm hips width measurement.

P1020593.JPG (2.48 MiB) Viewed 2076 times

Hereunder you have an idea of the big dimensions of the insert.When installed, the insert entry close itself by the pressure of the inner thick part of the labia as you have seen on previous pictures but the labias remain apart.In such case the built in version could be estheticaly better.

P1020594.JPG (2.2 MiB) Viewed 2076 times

[Mourad]

Dollsampler ,
Finally, your review has come! It is very comprehensive and very helpful
your lady is beautiful! The details are still very good even in rough light!
As you said, the private parts are well positioned ,and sit on a raised structure! that looks like the amor162B design,
when she splits her thighs, the private parts don't seem to open very dramatically, I guess
Are you going to trim the front of the insert? It looks so full that it pushes the labia out too far, ruining its beautiful shape
and I'm afraid it will be torn

[Dollsampler]

Hi mourad,
Yes I plan to modify the insert mouth in order that the labias remain thigh because her private parts are really outstanding including her closed realistic Anal entry.