So is NO inventor/Company working on a SELF cleaning doll?

professorjpj · Post by **professorjpj** » Fri Apr 12, 2019 10:16 pm

I would think that a self cleaning doll or at least a Mechanism would be the TOP priority for sex doll inventors/companies.. Is there LITERALLY nothing in the works? Maybe a doll that open up somewhere and change out pads or something? ALso why is it seem to difficult to come up with this? A self cleaning doll (if its realistic) would sell like crazy to millions of males that want a doll, but dont want to clean up! If appreciate any info or links if something is in the works? Or am I looking on the wrong site maybe?

Maviarab · Post by **Maviarab** » Sat Apr 13, 2019 9:02 am

professorjpj wrote:ALso why is it seem to difficult to come up with this?

Ok. My first question would be....how would 'you' do it? I personally can't think of any ideas or implementations that would work...it really is 'not' that simple when you think about it is it?

But if you're the first...I'm sure the good folks of TDF would love you...play around with some ideas.

AGL · Post by **AGL** » Sat Apr 13, 2019 12:46 pm

Yes, while I do agree that this would be a great idea, implementation would be difficult. I know for one that I'd probably use my dolls for sex a lot more if cleanup wasn't part of the deal.

Koki · Post by **Koki** » Sat Apr 13, 2019 3:58 pm

Okay so a TRIVIAL thing that someone could do is please make a custom 20cm shower douche nozzle that's thinner. All the ones on the market are much shorter and fatter as they are meant for humans. This would be a $20 item.

smallcat · Post by **smallcat** » Sat Apr 13, 2019 4:17 pm

I have a easy alternative. Just custom order a fixed doll design, they can actually size it, but instead get a short length one, like around 3"-5", in which you actually clean out extremely easy with just 1 finger, tpe is actually very stretchable and easy to clean with finger alone and wrap a thin cloth soapy with finger, easy clean. Hard to clean is 7" vag design

I can make it to end cap but eh, thats a good stretch tho for her with finger, is doable but I feel a smaller design would be extremely easy and easy to repair if issues were to arise. Also with smaller design, you can dry her out easily with rolled up paper towel by drying feeling around or leaving in. I tend to feel around dry out and insert another for final dry. Only takes a few mins. Just so you know, this is only TPE I am mentioning cause TPE vagina is stretchy, which allows you to clean it via above. I have a 51" doll which small 4" vag design, I can say is wow, sooo easy to clean with finger alone, but eh 51" for me isnt as enjoyable, shes a nice asian doll, havent seen anywhere. While if you cut it short vs pleasure length, I would rather have a clean doll above all else. Flushing out dolls with squirter, I don't trust much.

I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.

I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.

gonestill77 · Post by **gonestill77** » Sat Apr 13, 2019 4:25 pm

I don't see the big deal in clean up after play.
You don't have to take a doll to the tub to clean after banging.
You can do it right in your own bedroom or doll room.
You just need to get 5 items that are not expensive.
1. 5 gallon bucket can be gotten at Walmart for about 4 dollars.
2. Luggable loo toilet seat for bucket. 15 bucks at Dicks sporting goods.

: IMG_20170606_201350-2740x3600.jpg (772.11 KiB) Viewed 2242 times

: IMG_20170606_202254-2740x3600.jpg (1.1 MiB) Viewed 2242 times

3. Flavor injector- 5 bucks or so at Walmart.
4. Antibacterial hand soap.

: IMG_20160226_033240.jpg (105.16 KiB) Viewed 2242 times

5. Electric Air bed mattress pump- 10 to 15 dollars Kmart.

: IMG_20170803_230933.jpg (1.15 MiB) Viewed 2242 times

: IMG_20170803_230955.jpg (1.11 MiB) Viewed 2242 times

Probably a lot cheaper than what a self cleaning option would cost if any company ever came up with one.
It only takes me about 30 minutes to clean and completely dry. And this method has my dolls seal of approval.

: 20180106_054508-2740x3600-01.jpeg (1.66 MiB) Viewed 2242 times

For more details see my cleaning and drying threads in my signature.

Clean up is only a big deal if you make it one......

smallcat · Post by **smallcat** » Sat Apr 13, 2019 4:33 pm

^ wow. This was my first time guess of owning first doll. but I realized on h ow much trouble it was. I didnt believe people went through that much effort to clean and dry their dolls.

Cleaning clothes 1$ store + soap.. Finger(free). Paper towels 1$. 2$ total. clean dry under 5 mins in bed without moving her much.

gonestill77 · Post by **gonestill77** » Sat Apr 13, 2019 4:38 pm

smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.

I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.

I have had no problem cleaning my silicone lady in the 3 years I have had her.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.

smallcat · Post by **smallcat** » Sat Apr 13, 2019 4:45 pm

gonestill77 wrote:
smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.

I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
I have had no problem cleaning my silicone lady in the 3 years I have had her.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.

I don't know, my newer sanhui feels about the same as my zone..Just as my jm one. When compared to my tpe dolls. jm/san has about the same type of feel. My zone may be a bit more firmer.

I mean I can't even reach the end cap of my silicone doll with my finger, its too hard vs my tpe which is easy.

Silicone is really easy to clean with flushing. While TPE eh I don't trust without my boroscope if there are any damages in her fix design.

kklouzal · Post by **kklouzal** » Sat Apr 13, 2019 4:47 pm

gonestill77, after seeing your setup I have a completely new outlook on this entire subject. You sir need to write a brochure and get it put in every new dolls shipping container.

On the subject of this topic, a self cleaning system just does not seem feasible. Anything complicated would be too difficult to implement and create a major point of failure in the doll. The only remote idea I can come up with here is to have a small tube that extends out from the back of a dolls anal/vaginal cavity, through it's body, and up somewhere accessible. You could then remove a 'plug' to reveal an orifice to pour a cleaning solution down. Gravity would do all the work and flush out the ick. At this point you just gotta dry.

gonestill77 · Post by **gonestill77** » Sat Apr 13, 2019 5:02 pm

smallcat wrote:
gonestill77 wrote:
smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.

I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
I have had no problem cleaning my silicone lady in the 3 years I have had her.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.

I don't know, my newer sanhui feels about the same as my zone..Just as my jm one. When compared to my tpe dolls. jm/san has about the same type of feel. My zone may be a bit more firmer.

I mean I can't even reach the end cap of my silicone doll with my finger, its too hard vs my tpe which is easy.

Silicone is really easy to clean with flushing. While TPE eh I don't trust without my boroscope if there are any damages in her fix design.

Silicone dolls don't have a cap or plug like TPE dolls do because they are molded differently.

I can force my middle finger up there and reach the end of her vaginal tunnel.
Forgot to mention I use a soft leather auto chamois to get excess water before I use the air bed pump.
I wrap it around my middle finger to get all excess water out of her va jay jay before I put the pump in to dry any and all dampness.

I have never had a mold issue in 3 years using this method.

trees · Post by **trees** » Sat Apr 13, 2019 5:03 pm

I like clean so cleaning my doll is important to me. I use female condoms, they are easy to insert, I remove it after play. No lube or mess inside her. I wash the condom and re use it many times.

gonestill77 · Post by **gonestill77** » Sat Apr 13, 2019 5:12 pm

kklouzal wrote:gonestill77, after seeing your setup I have a completely new outlook on this entire subject. You sir need to write a brochure and get it put in every new dolls shipping container.

On the subject of this topic, a self cleaning system just does not seem feasible. Anything complicated would be too difficult to implement and create a major point of failure in the doll. The only remote idea I can come up with here is to have a small tube that extends out from the back of a dolls anal/vaginal cavity, through it's body, and up somewhere accessible. You could then remove a 'plug' to reveal an orifice to pour a cleaning solution down. Gravity would do all the work and flush out the ick. At this point you just gotta dry.

Thank you!

Glad to be of help.

professorjpj · Post by **professorjpj** » Sat Apr 13, 2019 9:51 pm

yeah, seriously, the cleanup is the biggest reason I am hesitating... At least with porn all you do is have a kleenex or paper towel handy... easy-peasy.. The cleanup AND the price of course.. both factors.. By the way, personally I despise cleaning... Even in my kitchen I mainly use paper plates, I only Clean when I HAVE to!
So maybe in 100 years self cleaning dolls will be a reality? Personally I think there would be a LOT more guys with dolls if there wasnt a "cleanup" involved... This should be the number one priority for doll companies to invent..

gonestill77 · Post by **gonestill77** » Sat Apr 13, 2019 10:24 pm

professorjpj wrote:yeah, seriously, the cleanup is the biggest reason I am hesitating... At least with porn all you do is have a kleenex or paper towel handy... easy-peasy.. The cleanup AND the price of course.. both factors.. By the way, personally I despise cleaning... Even in my kitchen I mainly use paper plates, I only Clean when I HAVE to!
So maybe in 100 years self cleaning dolls will be a reality? Personally I think there would be a LOT more guys with dolls if there wasnt a "cleanup" involved... This should be the number one priority for doll companies to invent..

If you hate cleaning that much, maybe a doll isn't for you.
Dolls need to be cleaned and maintained and powdered and eventually repaired. You have to take care of them, otherwise, it would be a big waste of money.

The chances of a self cleaning doll becoming available are pretty nil.

Even if you use a female condom, you have to put it in and take it out and clean it I guess.
I would never use one as it looks like shit hanging out of her and rubbers greatly reduce sensation whether for a male or female.
That is why I would never use them. I'd rather fully enjoy myself and just clean up my mess when I am done playing.