Starpery.com

Modified one-gallon wet/dry vac orifice flusher

Got an idea? Need an invention?
Post Reply
Sakana
Contributing Poster
Contributing Poster
Posts: 21
Joined: Sun Mar 24, 2019 3:45 pm
Contact:

Modified one-gallon wet/dry vac orifice flusher

Post by Sakana »

Too tired after throwing down your best moves?
Can't muster the energy to drag her into the shower or deal with inefficient and messy, manual douche cleanup?
Build yourself one of these and keep it next to the bed!

DISCLAIMER: Design not yet tested, but the theory is sound. ;oP

Theory and design:
Use a cheap one gallon wet/dry shop vac and modify the tank and nozzle end with the design shown below. Provides a power douche with vacuum return to the tank for little to no mess. Fill the collection tank to 1/4-1/3 mild soapy water. Then just insert tube until nozzle is flush, turn on the vac motor (then the pump switch if using optional wiring), open the valve and she's clean in seconds. For the anal orifice, depending on placement her cheeks may get in the way of a good seal. If so, use a slightly longer flush tube and the "crack and crevice" nozzle attachment that came with the vac to get "between the cheeks" for a good seal. A small ball valve can be placed between the supply tube and external fitting at the nozzle for pressure control if desired. This will allow direct wiring of the pump to the vac switch and let you control the flow by way of the valve.
NOTE: Now, I know you must realize that the word "seal" is ambiguous, because you can't vac the water with an airtight seal, but I think you get the idea.

Any comments or ideas appreciated.
one gallon vac based orifice flush.jpg
one gallon vac based orifice flush.jpg (124.38 KiB) Viewed 602 times

Post Reply

INFORMATIONS