CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
As I browsed the site I was inspired to shoot this idea out there on designing your own nipples.
GATHER REFERENCE PHOTOS.:The First step is to find reference photos of the ones you like. (make sure they are fairly decent quality and clear in details if possible) Also make sure that at least one of the nipples is facing forward as you'll need this angle to create a scukpt template featuring the overall diameter and shape that the nipple has.
CREATING SCULPT ON TEMPLATE : The second step is to use a photo editing program to create a template with. ( I use photo shop) you could also simply crop the image measured in centimeters (3,4,5, etc.). You'll be placing clay on this and using it as a guide to sculpt/ copy the forward facing nipple. Then print it out on printer paper.(My example below).
SCULPTING THE NIPPLE: You only need to do one unless you're feeling adventurous!
(AS A SIDE NOTE: ISOPROPYL MYRISTATE STEP IS USED FOR OIL BASED CLAYS *SUCH AS MONSTER CLAY* (FEATURED) ONLY.
Tip: using very small sowing needles during the whirl pool step will result in very fine wrinkle details.(press semi firmly when making)
MOLDING THE NIPPLE:
PREPARING NIPPLE PIGMENT + CASTING SILICONE:
"POWDER PAINTING" YOUR NIPPLE:
UPGRADING YOUR EXISTING DOLL: THE BENEFIT OF HAVING A DOLL ALREADY IS THAT YOU CAN SCULPT THE NIPPLE AND HAVE AN IDEA OF WHAT YOU'LL END UP WITH WHILE DOING SO! RATHER THAN HAVING A TEMPLATE YOU WOULD SIMPLY SCULPT USING YOUR DOLLS BODY AND CREATE THE DESIRED LOOK USING THAT. once done follw the rest of the steps above.
*PUFFY NIPPLES*: after step 6 see texturing in above sculpting tutorials for some ideas on how to texture.
A couple of final notes:
A CURRENTLY UNTESTED TPE WORK AROUND: cut a piece of double sided tape to the exact size of the silicone nipple diameter and place it on the bottom of the nipple (perhaps it will secure and also act as a barrier between the two materials.)
A NOTE FOR CASTING THIS ADD ON NIPPLE: During the step where you pour the silicone in your mold have ready prior to that a rough sculpted nipple with areola that is roughly the same size as your dolls current nipple. Once you pour the silicone in the mold simply line up the clay sculpted nipple/areola to where you want the new cast nipple/areola to rest on top of. Then press it into the freshly poured silicone and leave it to cure. (some silicone will displace out of the mold so make sure you have mold release on the entire mold (outside included). Once the piece is cured and "painted" you should be able to slap it on your doll!
SEX TOY TPE MATERIAL SUPPLIER: (HAVE NOT INQUIRED ABOUT PURCHASING)+ ( HAVE NOT RESEARCHED MOLDING?CASTING METHODS)
LINK: http://www.gainshinetpe.com/products/tpe-for-sex-toys
Hope this helps.
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
ENSURING AN EXACT FIT BY CREATING A "ROUGH COPY" INSERT OF THE INTENDED SURFACE AREA OF APPLICATION. :
ALTERNATIVELY: (As stated above.) Rather than sculpting a whole new rough copy clay insert. AFTER YOUVE MADE THE MOLD OF YOUR SCULPTED NIPPLE/AREOLA. Flip it over and the exact shape and area that the dolls nipple and areola take up will already be present because you formed the rough sculpt layout right on the dolls breast. Simply pour some molding silicone inside this area and wala! a silicone insert rather than a clay insert. BUT AS STATED ABOVE: before placing this silicone insert into the poured ecoflex silicone make sure to apply vaseline/mold release to it to prevent binding.
INSERT RESULT DIFFERENCES: The silicone pour method is not only less work but more accurate in terms of mimicing your dolls nipple/areola area.
IDEAS FOR CAPTURING AN EXISTING BREASTS CURVATURE + NIPPLE:
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Bored, certified "plastic" surgeon. Serving the masses.
Dolls i have worked on. Real doll ,JM doll,teddybabes,Anime fabric doll,wm doll, d.s dolls, Diao shi, extravaganza air dolls, 1st pc, and candy8teen dolls.
Need work done? Feel free to send me a note.
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
thank you & you're welcome!samara78 wrote:Reallly really cool. Thanks
- rubherkitty
- Doll Oracle
- Posts: 8962
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Thanks for taking the time.
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
thanks r.k. and very welcome!rubherkitty wrote:Great job and info! I'll have to go back and study this further.
Thanks for taking the time.
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Note: You might want to either use regular gray clay to sculpt with if going this route as hydrocal does get warm whilst curing which would heat up oil based clays resulting in loss of detail.Just allow the gray clay to dry a bit then use a mold release agent on it). OR if you"'ve already made a silicone casting of your nipple simply mold that with hydrocal and you're good to go!
* ALWAYS wear proper respiratory protection when mixing hydrocal though.
It can be found on various vendor sites here are a couple:
https://www.brickintheyard.com/collecti ... calwht-8lb
https://www.amazon.com/dp/B00TSOPMEI/re ... UTF8&psc=1
Another (untested) alternative to create a barrier between a silicone prosthetic and the tpe might be: rubber cement? (Paint a thin layer on the back of nipple and allow to dry first perhaps.) Perhaps a tpe expert might know if it's harmful.
https://www.amazon.com/Rapid-Rubber-Cem ... ment&psc=1
OR perhaps this gel glue. (Untested on tpe OR silicone) but it can be thinned with warm water resulting in a micro barrier layer.
https://www.amazon.com/Aleenes-Clear-Ge ... ++gel+glue
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
Opinion: This glue seems great for creating temporary bonds for "on top of" the skin" mods as well as a sufficient barrier material to keep two different materials from touching.. (TPE SAMPLE ON THE WAY FOR TESTING)
It can be found here: https://www.amazon.com/Aleenes-Clear-Ge ... tacky+glue
Re: CREATING YOUR OWN CUSTOM SILICONE NIPPLES TUTORIAL
If you don't want to buy a whole sculpting tool kit just to have access to a needle tool.. Go outside and get a fairly straight twig. Cut it to size. Go to the dollar store/craft store etc. and get a pack of sowing needles and with some pliars push the needles into the ends of your stick and wala!
(You can even get a pack of needles with various sizes so that you can add varied line textures during the whirlpool texturing step that range from very small to medium width. And have both the needles right on the same tool.)