Making a doll mover/agitator (so she fucks me)

[craigo]

Hello there,
I'd like my doll to move (basic movements, up/down etc) so she can fuck me occasionally. Basically i wanna hook something up to power, and have her thrust so i just need to be in the right place at the right time. Anyone know of anything that can help me with this idea?

Craig

[djcdoll]

Hello there,
I'd like my doll to move (basic movements, up/down etc) so she can fuck me occasionally. Basically i wanna hook something up to power, and have her thrust so i just need to be in the right place at the right time. Anyone know of anything that can help me with this idea?

Craig

The easiest way to do this without resorting to a powered system would be using some kind of doll suspension via a pulley with a big spring.
This would be good for cowgirl, reverse cowgirl positions, doggy etc.
Quite a few of the RealDoll owners use these suspension systems as the RealDolls have a convenient suspension point near the dolls neck area.
You don't say what type of doll you have so I'm guessing a TPE doll. Most of the TPE dolls don't have a suspension point so it's a bit tricky with those.
Might be worth having a look in the RealDoll and RealDoll2 areas of the forum for some ideas though.

[Dollpimp2018]

yes, on many sex shops you can buy a sex swing like the one in the picture:

[craigo]

I should also mention I'm broke but have tools lol...

Cheers guys. The input is helping my creative, soon to be inventive streak... a spring from a trampoline is in the parts box btw.

I am kinda stuck on the thought of an electric motor and have played with a jigsaw but found it too noisy. The motion of the mechanism was what I was after (push/pull). I recently filleted a fish and thought about utilising an electric knife as it's much quieter with the same action... still thinking........

[djcdoll]

I should also mention I'm broke but have tools lol...

Cheers guys. The input is helping my creative, soon to be inventive streak... a spring from a trampoline is in the parts box btw.

I am kinda stuck on the thought of an electric motor and have played with a jigsaw but found it too noisy. The motion of the mechanism was what I was after (push/pull). I recently filleted a fish and thought about utilising an electric knife as it's much quieter with the same action... still thinking........

Yes, trampoline springs are what the RealDoll guys are using for their doll suspension and ceiling rail systems.
Let us know how you get on.

[craigo]

Another thought is ditching the push pull and using rotation. Although inpracticle, if a bicycle is flipped upside down and the rear wheel spun in the right direction, the pedals/cranks provide a possibly very utilisable action....

But seriously, maybe (definately) I'm just in an altered state of mind and maybe this idea is going nowhere... Maybe...

[ChallengerRT]

Hello there,
I'd like my doll to move (basic movements, up/down etc) so she can fuck me occasionally. Basically i wanna hook something up to power, and have her thrust so i just need to be in the right place at the right time. Anyone know of anything that can help me with this idea?

Craig

I'm sure many of us have thought of this, and frankly, given it's low-tech application, I'm really, really surprised doll manufacturers haven't pursued this very doable idea...

Well, I have, and here's how I'd see it through...

My idea for a love doll "sex machine" is based on a fairly simple concept. (got the idea from seeing up close...silent, compact, high powered wheel-chair lifts for vans that can move/lift quite heavy wheelchairs up and down and side to side!)

https://www.spinlife.com/Harmar-AL425-A ... ctID=90616

Note the "BASE" of the unit, which is the purpose/focus of discussion here...It's a very powerful and silent geared base unit that could be modified to thrust a metal pushrod up and down, instead of moving an arm side to side as it is shown.

Therefore:

1. Picture an enclosed motorized gearbox about the size of 12" x 12" (foot square cube) (similar to geared motor unit shown above) as the base of the unit. Inside the box is a geared-down silent, high torque motor that pushes a rod up and down (thrusting up to 50 lbs.)

2. Coming out of the top of the motorized gearbox is a 5 foot tall square metal post that has guides for the upright pushrod from #1. Thrust is adjustable by 1", 2", 3" or 4" up and down. Thrusting speed, (based on the speed and weight-handling aspects of wheelchair lift as observed) due to weight would be one, two, maybe three strokes p/second max. The speed will be controlled by a wired potentiometer/speed knob.

Here's a VERY CRUDE VISUAL IDEA OF WHAT I'M TALKING ABOUT:

https://www.frightprops.com/electric-mo ... throw.html

3. Keep in mind, due to the pushrod only thrusting up to 50lbs. up and down, we'll be limited to dolls at (50lbs. and under).

4. Have a rigid (much like an aesthetic-looking back brace) attractive leather "corset" made for your prospective doll (preferably white leather to avoid staining the doll). This rigid leather corset is tightly wrapped around the torso of the doll, covering her from hip to base of breasts.

The rear of the corset has a flat plate sewn into/attached to the leather which has an external clamp attached to it that is clamped/attached to the upright pushrod (explained above in #'s 1 and #2) that travels up and down the post of the motorized unit.

Here's the theoretical outcome:

Put the corset tightly on your "loose-jointed" legged doll. (Loose jointed legs will give more realism when she's straddling you and moving up and down on your penis and hips!)

Sitting yourself on the edge of your bed, chair or couch, you slide the motorized unit up to you, between your legs, so the upright post and pushrod are flush to the edge of the bed, chair, couch (and your private parts).

Turn unit on "slow" until the pushrod strokes downward to it's lowest point, then turn it off.

Grab your "corseted" doll facing you with legs straddling you side to side ( Facing you Cowgirl style) and then slowly, gently slide her on to your erection.

Clamp the corset's rear clamp firmly onto the upright thrusting rod.

Turn on unit to desired thrusting speed.

Now your hot-looking sex doll is "cowgirling" YOU. You're sitting back taking it all in while she's riding up and down your shaft...Yep, she's doing all the work, fucking you, instead of the other way around!!

I know this will work, it's just going to take time, money and ingenuity, of course.

What's really cool, is the motorized unit with upright pole could be aesthetically executed to double as a functional lamp ( mount a round, white "lightpost ball" at the top of the upright post of unit) and attach a doll hanging hook with which you could display/hang you fully-dressed...or not, Doll when not in use. Or, simply mount coat hanger hooks at the top to use as a coat raack that doubles as a lamp.

Also, as an added bonus, the doll can be corseted in reverse for her to fuck you reverse cowgirl too!

I'm going to work on this when I retire next year...as I'll have the time and resources then...

[RoadRoller]

The idea is indeed right and I believe it should work fine. Have you seen this machine anyways? Could be an inspiration. If I remember correctly, the maker is an user here. The website is down unfortunately.

[jwhf]

wow this is interesting

[somethingrandom]

I saw a porn once where they used a rocking chair that had its arms and rails as one continuous curved piece (so the rail didn't "stop" at the front like most chairs, it kept curling upwards and back until it became the arm of the chair as well). The girl sat on the edge of the chair and the guy knelt (I think, possibly he stood) in front of the chair, pulling on the arms of the chair rocking it towards him and back again. I've seen similar chairs in antique/used furniture shops and have thought about getting one for trying this maneuver.