I never cared for the Barbie doll look between the legs. It's just that, I came of age in an era when most gals had a nice thick bush down below and that's what I like to see.
Now, there are a few options when it comes to adding pubic hair to TPE dolls. You can plunk down $75 to $100 for implanted pubes at the factory. Kind of pricey though and several members report they pull out rather easily. You can buy a Merkin and stick it on. Really good ones are pushing $40 to $50 though. Then there's the Mohair yarn option. Just glue up your doll's pubic region and stick it on one clump at a time.
Well, I decided to do a variation on that theme and make a Mohair Merkin. Something that wouldn't just fall off, but would be relatively easy to remove. So here's what I came up with:
What you'll need are, 2 pieces of thin cardboard, one light and one dark. Scissors, I like the curved variety like the ones shown, ordinary white glue like Elmers and some good quality Mohair yarn. You'll also need a piece of clear plastic, not shown in the picture.
- DSC00337.JPG (64.59 KiB) Viewed 12491 times
The 1st step is to cut the dark piece of cardboard into the shape you'd like your doll's pubic hair to be. I like mine nice and full and to go down the sides a bit, so I cut my cardboard accordingly.
- DSC00339.JPG (63.44 KiB) Viewed 12491 times
Next, trace the shape onto the lighter piece of cardboard and cut it out.
- DSC00342.JPG (62.88 KiB) Viewed 12491 times
- DSC00343.JPG (59.84 KiB) Viewed 12491 times
Now, take your Mohair Yard and pull off several clumps, (the fuzzy part). No need to unravel it. Just get a firm grip and pull.
- DSC00345.JPG (56.44 KiB) Viewed 12491 times
Be sure to pull enough off to cover the hole you made in the templet.
- DSC00346.JPG (69.17 KiB) Viewed 12491 times
Next you'll need a piece of clear plastic.
- DSC00347.JPG (71.53 KiB) Viewed 12491 times
Place it underneath the cardboard templet as shown below.
- DSC00349.JPG (67.8 KiB) Viewed 12491 times
Then, apply the white glue to the surface of the plastic through the hole in your templet and smooth out evenly.
- DSC00350.JPG (70.25 KiB) Viewed 12491 times
- DSC00352.JPG (68.19 KiB) Viewed 12491 times
Continued Below