I really do just love dolls (smartdoll journey)

Dees luver · Post by **Dees luver** » Mon Jun 17, 2019 8:44 pm

scooter_ca wrote:Hey Journey.
Will you be posting the picture you took?

Thanks,
scooter

Journey said: sure scooter! Just for you!!

: DEB1087C-2255-4FDC-99E1-C18FDF1ED502.jpeg (857.03 KiB) Viewed 3214 times

Anung Un Rama · Post by **Anung Un Rama** » Mon Jun 17, 2019 10:42 pm

I never had any doubt!

Anung

Dees luver · Post by **Dees luver** » Tue Jun 18, 2019 12:07 am

Anung Un Rama wrote: I never had any doubt!

Anung

You didn’t expect this little fireball to be shy did you?

Mishka1965 · Post by **Mishka1965** » Tue Jun 18, 2019 1:51 am

Some progress tonight. The Snakebyte is printed, and is drying from a layer of epoxy clay, and the Jackson is printing tonight.
These should look quite nice when painted.
Also, 100% designed by me..from original pics - shoot man, I should just make a real scale body as well!

artists renderings, not final color, just a visualization

Mishka

Anung Un Rama · Post by **Anung Un Rama** » Tue Jun 18, 2019 2:05 am

Awesome Mishka, and good luck doing the paint work on dees "DK2 Dinky Pile of Skulls"

Does this assist.

: jackson-dk2-pile-of-skull-D_NQ_NP_708244-MLB29577961233_032019-F.jpg (263.26 KiB) Viewed 3200 times

For the full scale body, sure that would be awesome, been done a few times with amazing results, https://all3dp.com/2/3d-printed-guitar- ... -3d-print/ , I do note on the guitar forums strut bracing is paramount in 3D prints, and I would recommend that for the neck the go to guys IMHO would we Warmoth!

https://www.warmoth.com/Pages/GuitarNecks.aspx

I have used them a few times, and have no complaints at all. Wilkinson components for fitting as are also affordable quality too.

Electronics, well what ever fits into what you print for cavities, and range is abundant, but still, recommend shield tape.

I think Journey is going to love her axe!

Anung

carlys_guy · Post by **carlys_guy** » Tue Jun 18, 2019 3:27 pm

hey mishka have you thought about printing a 1/3 scale anime doll? algaeholics in the UK printed two from thingiverse.
https://www.thingiverse.com/search?q=an ... 93acd59b8a

carlys_guy

Dees luver · Post by **Dees luver** » Tue Jun 18, 2019 9:11 pm

Mishka1965 wrote:Some progress tonight. The Snakebyte is printed, and is drying from a layer of epoxy clay, and the Jackson is printing tonight.
These should look quite nice when painted.
Also, 100% designed by me..from original pics - shoot man, I should just make a real scale body as well!

artists renderings, not final color, just a visualization

Mishka

Hi mr Mishka! It’s me Journey! I hacked Dees account to tell you thank you thank you thank youuuuuuuuuuuu! Hehehe I’m so excited to be getting a guitar! Yay!

Anung Un Rama wrote: Awesome Mishka, and good luck doing the paint work on dees "DK2 Dinky Pile of Skulls"

Does this assist.

The attachment jackson-dk2-pile-of-skull-D_NQ_NP_708244-MLB29577961233_032019-F.jpg is no longer available
For the full scale body, sure that would be awesome, been done a few times with amazing results, https://all3dp.com/2/3d-printed-guitar- ... -3d-print/ , I do note on the guitar forums strut bracing is paramount in 3D prints, and I would recommend that for the neck the go to guys IMHO would we Warmoth!

https://www.warmoth.com/Pages/GuitarNecks.aspx

I have used them a few times, and have no complaints at all. Wilkinson components for fitting as are also affordable quality too.

Electronics, well what ever fits into what you print for cavities, and range is abundant, but still, recommend shield tape.

I think Journey is going to love her axe!

Anung

mr Anung I want to be a rock star, do you think I can be a rock star? Dees offered to teach me how to play but I said perhaps he better learn first

: 30E1AF1A-4E2A-4F4F-B0F3-444F9CB7952E.jpeg (1.52 MiB) Viewed 3174 times

mr Anung thank you for sending us your music! We’ve been rocking out!

Anung Un Rama · Post by **Anung Un Rama** » Tue Jun 18, 2019 9:38 pm

Glad we could assist, Dees and Miss Journey, it was more so the ipad "how to" and browser app, so you can also now listen to everyone's music too!

When your ears have recovered from the last one, I got three more different demos in similar format, with my guys and the rock sista, same kinda heavy, so PM me when you are ready for them, and yes, perhaps you guys can all practice together, as Delilah is also quite suited to the guitar!

as two guitarist upfront is better than one alone.

Anung

Dees luver · Post by **Dees luver** » Tue Jun 18, 2019 9:52 pm

Hi guys! Me again! Like the new avatar? Hehe!

I got new panties! Do you guys want to see my panties?

: 8E11770F-1748-41F9-B205-8FFE6125A811.jpeg (1.79 MiB) Viewed 3170 times

ok mr anung that’s a good idea, I’ll have Delilah teach me but when her and Dees play they don’t exactly play “guitar”

oooh! look! what are these pretty things?

scooter_ca · Post by **scooter_ca** » Tue Jun 18, 2019 11:57 pm

Dees luver wrote:
scooter_ca wrote:Hey Journey.
Will you be posting the picture you took?

Thanks,
scooter
Journey said: sure scooter! Just for you!!

Thank you Journey
You took beautiful picture!

Thanks,
scooter

Mr Franz · Post by **Mr Franz** » Wed Jun 19, 2019 11:50 am

Dang! Just priced Smartdolls.... Talk about sticker shock!!!!

https://www.ebay.com/itm/Smart-Doll-Uni ... 0667.m2042

Dees luver · Post by **Dees luver** » Wed Jun 19, 2019 9:47 pm

Mr Franz wrote:Dang! Just priced Smartdolls.... Talk about sticker shock!!!!

Yup you have to really want one Mr Franz, they are not cheap, you can buy a full size doll for what a smartdoll costs,
The clothing and shoes for 1/3 dolls is just as outrageous, from smartdoll her shoes $60, her shorts $50, t shirt $50

I believe the doll is cheapest direct from smartdoll here
https://shop.smartdoll.jp/

Some clothing and accessories can be found cheaper elsewhere

And hey whoever said money can’t buy happiness just never discovered dolls

: F7779805-86F0-42AA-B6FB-E85C988CE093.jpeg (1.45 MiB) Viewed 3137 times

: 36B0ECE6-2FED-4BDD-8B49-E0EE2721981E.jpeg (1.31 MiB) Viewed 3137 times

Panther68 · Post by **Panther68** » Wed Jun 19, 2019 9:54 pm

And hey whoever said money can’t buy happiness just never discovered dolls

So true Dees.

Mishka1965 · Post by **Mishka1965** » Wed Jun 19, 2019 10:10 pm

These little 1/3 scale guitars are so small that there's no way I would paint them like that. I wonder if there are stickers or a way to transfer the decal like that.
I wonder about those appliques that use water to go on and dry..

At this point I'm going to airbrush acrylic paint tomorrow, and then I can look for decals...

Mishka

Anung Un Rama wrote: Awesome Mishka, and good luck doing the paint work on dees "DK2 Dinky Pile of Skulls"

Does this assist.

jackson-dk2-pile-of-skull-D_NQ_NP_708244-MLB29577961233_032019-F.jpg
For the full scale body, sure that would be awesome, been done a few times with amazing results, https://all3dp.com/2/3d-printed-guitar- ... -3d-print/ , I do note on the guitar forums strut bracing is paramount in 3D prints, and I would recommend that for the neck the go to guys IMHO would we Warmoth!

https://www.warmoth.com/Pages/GuitarNecks.aspx

I have used them a few times, and have no complaints at all. Wilkinson components for fitting as are also affordable quality too.

Electronics, well what ever fits into what you print for cavities, and range is abundant, but still, recommend shield tape.

I think Journey is going to love her axe!

Anung

Dees luver · Post by **Dees luver** » Wed Jun 19, 2019 10:20 pm

Panther68 wrote:
And hey whoever said money can’t buy happiness just never discovered dolls
So true Dees.

After I wrote that I realized it was brilliant, sometimes I amaze myself

I may make that my new sig line :haha4:

Mishka1965 wrote:These little 1/3 scale guitars are so small that there's no way I would paint them like that. I wonder if there are stickers or a way to transfer the decal like that.
I wonder about those appliques that use water to go on and dry..

At this point I'm going to airbrush acrylic paint tomorrow, and then I can look for decals...

Mishka

Anung Un Rama wrote: Awesome Mishka, and good luck doing the paint work on dees ""DK2 Dinky Pile of Skulls"

Does this assist.

jackson-dk2-pile-of-skull-D_NQ_NP_708244-MLB29577961233_032019-F.jpg
For the full scale body, sure that would be awesome, been done a few times with amazing results, https://all3dp.com/2/3d-printed-guitar- ... -3d-print/ , I do note on the guitar forums strut bracing is paramount in 3D prints, and I would recommend that for the neck the go to guys IMHO would we Warmoth!

https://www.warmoth.com/Pages/GuitarNecks.aspx

I have used them a few times, and have no complaints at all. Wilkinson components for fitting as are also affordable quality too.

Electronics, well what ever fits into what you print for cavities, and range is abundant, but still, recommend shield tape.

I think Journey is going to love her axe!

Anung

I don’t want you to go to all that trouble anyway, really Journey will be very very happy if it is only one color, her favorite color of course being wine red

but any color will be awesome