My Phicens Have No Dresses!!

Begog · Post by **Begog** » Wed Nov 07, 2018 5:21 pm

I'm FREE!!!
Awesome!

OlmanOz · Post by **OlmanOz** » Wed Nov 07, 2018 5:42 pm

Well let's put it this way lone. I would be dropping the soap a fair bit and asking that redhead to pick it up.

Another perfectly matched Beauty.

carlys_guy · Post by **carlys_guy** » Wed Nov 07, 2018 9:58 pm

very nice girl you have there i like red heads also. ozzy you need to be a gentleman and pick up the soap half the time so you can get closer to her treasures.

carlys_guy

OlmanOz · Post by **OlmanOz** » Thu Nov 08, 2018 9:13 am

Perhaps we could put a plastic chair in the shower and she could sit on my knee then so we can both reach the soap..?

Is that gentlemanly enough..

scooter_ca · Post by **scooter_ca** » Thu Nov 08, 2018 6:39 pm

OlmanOz wrote:
... these are not my pictures.. actually I have no
recollection where I got them from... But thanks to
whoever shot these wonderful pictures..

Too bad.
I was thinking you could use the skeleton as a robot character in your story.
As for the flexible body..... I'm sure you could think of some use for it.

Thanks,
scooter.

Mac Workz · Post by **Mac Workz** » Fri Nov 09, 2018 2:54 pm

OlmanOz wrote:I don't think Lone is going to do anything but leave it be, for the collector value,..

We do have to remember this is a plastic skeleton. I myself have had problems with the joints on other plastic figures but they do loosen up with a little careful working., I did snap one on what I believe to be a chinese fake copy of a star wars 7'' figure, i got as full refund on that one..

But if anyone has had any experience on this issue for a phicen please let us know..

Even warming it up may help too by putting it into a sealed plastic bag and dunking it in hot water..
I would however suggest any one who tries any of these ideas do it with a doll you don't mind sacrificing.. just incase of a catastrophic failure.. ..

it would also be interesting to hear from anyone who has repaired a broken plastic phicen skeleton..
and just for you enjoyment.. here are some pics I posted way back many moons ago in another thread..

People are always telling me it not what you look
like but what's on the inside that counts..
a1.jpg
I'll show them.. Give me a minute.. errrr....
take my shoulder down...
a2.jpg
Get my arms out, now for the legs..
Come on...Pull...!
a3.jpg
Who needs a damn cover anyway..
come on.. get off...
a4.jpg
Come on legs.... grrrr...
a5.jpg
There, that's it.. how sexy am I without a body wrap..
Haa.. ha..come on.. tell me..?
..
..
..
I'm waiting...?
..
..
..
crap it's cold out here.. Can I have my body back...
a6.jpg
Ps.. these are not my pictures.. actually I have no
recollection where I got them from... But thanks to
whoever shot these wonderful pictures..

Also they are very old pics.. I'm sure the new skeletons are way different now..

Very wise move! The plastic skeletons snap and break. I was able to 'use' them after they broke with a little creativity! I made some excellent NSFW videos with my lover at the time using a couple of broken skeleton dolls. I'd be happy to share those videos. They got over 60,000 views a piece when I had them up.

OlmanOz · Post by **OlmanOz** » Sat Nov 10, 2018 6:58 pm

Yeah stick them up here with the link if you have one.

Maviarab · Post by **Maviarab** » Sat Nov 10, 2018 7:02 pm

OlmanOz wrote:Yeah stick them up here with the link if you have one.

+1

Post by **LoneRanger** » Sun Nov 11, 2018 12:41 pm

I know OZ is looking at horses and if others are I figure I can share what I have and what I think of them.

From Left to Right

Dragon Horst & Blitz Horse 1/6 Scale
Glitter Girls by Battat – Celestial 14-inch Morgan Horse
Kumik 1/6 Scale
ACI Toys 1/6 Scale
Mr.Z Hannover 1/6 Scale

jmho..

Best for the Price - Kumik
Most Real looking - Hannover (extremely fragile - like porcelain)
Most Awesome - Dragon
Cheapest - Battat
Best with Tack included - ACI Toys (all my Knights have these but this is a stripped one for comparison in size)

OlmanOz · Post by **OlmanOz** » Sun Nov 11, 2018 5:45 pm

Thanks for posting that. Very interesting the kumik one does look quite good, better than the eBay ads. I have a Mr Z on the way but it's odd you say is fragile and looks like Porcelain because the ads say it is resin and that it weighs 3 kilos so it should be quiet Solid. And resin is usually quite flexible. Time will tell when I get mine in one or two weeks.

carlys_guy · Post by **carlys_guy** » Sun Nov 11, 2018 6:40 pm

nice review but which one is the best size wise for a phicen?

carlys_guy

Post by **LoneRanger** » Sun Nov 11, 2018 7:29 pm

carlys_guy wrote:nice review but which one is the best size wise for a phicen?

carlys_guy

Fact is they all are...I have used all but the new Dragon one on the Left and they all have been fine!

OlmanOz · Post by **OlmanOz** » Mon Nov 12, 2018 8:39 am

These are two of the three horses I currently have. The one on the left came with queen Hippolyta who is now working as manager of the restaurant by the jetty in Busselton under the name of Bridget.

I have a black one that came with Wonder Woman as well from the same series and is exactly the same mold/size.
The Marshalls horse next to Sam is electronic. When you push his head down he makes a series of pre programmed noises. He came from the equivalent of Walmart minus a figure..
The horse on the left looks bigger coz its closer to the camera but they are both the same height. however the horse on the right has a higher saddle.
And I cut off the girly long mane and tail to make it look more realistic..

: IMG_20181112_205323.jpg (2.81 MiB) Viewed 979 times

They are actually both too small to be real 1/6th scale, and the 12'' figures won't actually sit properly in the saddle..

Sam was only to happy to demonstrate this..

They are both approx 26.5cm tall, 30cm long and 7cm wide. (10.5''x 12''x 2.75'')

: IMG_20181112_205514.jpg (3.18 MiB) Viewed 978 times

But these smaller horses are perfect for the smaller phicens..

On the right, Nat is a PLMB2018-25B.. 27.8 cm (11 inch)
The naked girl on left is a PLMB2018-27B.. 27 cm (10.5 inch)

: IMG_20181112_211323.jpg (3.08 MiB) Viewed 979 times

The Mr Z horse that i have on order (which is on the extreme right in Lones pic) is 37cm*33cm*12cm (14.75''x 13''x 4.75'')
and should be perfect for a standard size Phicen..

Think I may have to invest in a kumik too..

Post by **LoneRanger** » Mon Nov 12, 2018 11:41 am

Yep, those are 1/9th scale horses, just like the more popular and well known Breyer Horses. I never understood why they sold a 1/9 Horse with 1/6 scale figure other then it is cheaper to make and easier to package with the figure.