Starpery.com

New to me method of drying…….

Ding! POP! Crash! Thud! oops...let's get her all fixed up!
User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: New to me method of drying…….

Post by MannequinFan »

I'm not sure if it would work with an inflator, but I designed a tool for cleaning/drying that works with an aquarium pump.
For those with 3d printers I posted the .stl files here...
viewtopic.php?p=1221053#p1221053
Member Starquake has the earlier versions, member CrashTW has the newest version but haven't got his review yet.

Image

tanman9990
Senior Member
Senior Member
Posts: 205
Joined: Fri Nov 10, 2017 4:28 pm
Contact:

Re: New to me method of drying…….

Post by tanman9990 »

siliconelover wrote:I can't imagine that the inflator alone wouldn't ??? Do you have a TPE doll, is the cannel on those dolls really tight ? IDK my dolls are silicone and life size. Maybe you need to blow out the area a few times over the course of a half hour or so ... I think using a good foaming toy wash could also be to your advantage.
so would the foaming agent dry faster or is it just for better sanitation?

the new Coleman pump works for the whole canal, but it takes twenty minutes per hole. It's also a bit hard to insert the pump without it falling out. I am assuming that TPE takes longer than silicone based on your statement.

Viktor777
Apprentice
Apprentice
Posts: 14
Joined: Wed May 02, 2018 10:35 am
Contact:

Re: New to me method of drying…….

Post by Viktor777 »

So I'm guessing a small rod with a towel on it is not gonna do the trick lol

User avatar
siliconelover
Doll Guru
Doll Guru
Posts: 5062
Joined: Wed Feb 06, 2008 12:00 am
Location: A Little South of Sanity ...
Contact:

Re: New to me method of drying…….

Post by siliconelover »

Viktor777 wrote:So I'm guessing a small rod with a towel on it is not gonna do the trick lol
Perfect example of Inexperience.
SEX, DOLLS and ROCK & ROLL

User avatar
Aikolover1
Doll Advisor
Doll Advisor
Posts: 781
Joined: Thu Apr 05, 2018 5:28 pm
Location: North Idaho
Contact:

Re: New to me method of drying…….

Post by Aikolover1 »

This gives me an idea, I have a small shop vac that has a blow function, might try it.
Jade 80cm Jmdoll Elf
KellyJ 165cm Sanhui
April. 145cm Sanhui

User avatar
Fantastic Plastic
Doll Elder
Doll Elder
Posts: 2346
Joined: Mon Nov 28, 2016 9:17 pm
Location: In a harem of beautiful love dolls!
Contact:

Re: New to me method of drying…….

Post by Fantastic Plastic »

Make sure you turn it off if the breast's start to enlarge.
:haha4:
Image

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

tanman9990 wrote:
siliconelover wrote:I can't imagine that the inflator alone wouldn't ??? Do you have a TPE doll, is the cannel on those dolls really tight ? IDK my dolls are silicone and life size. Maybe you need to blow out the area a few times over the course of a half hour or so ... I think using a good foaming toy wash could also be to your advantage.
so would the foaming agent dry faster or is it just for better sanitation?

the new Coleman pump works for the whole canal, but it takes twenty minutes per hole. It's also a bit hard to insert the pump without it falling out. I am assuming that TPE takes longer than silicone based on your statement.

20 minutes per hole sounds about right.
And that is great time wise considering the alternatives take an hour or more per hole.


:glou:
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

Aikolover1 wrote:This gives me an idea, I have a small shop vac that has a blow function, might try it.

That may very well work, as long as the hose will fit in her snizz and cornhole. :whistle:

Let us know how it goes....... :thumbs_up:



:glou:
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

User avatar
Bauta
Senior Member
Senior Member
Posts: 391
Joined: Mon Oct 10, 2016 11:23 pm
Contact:

Re: New to me method of drying…….

Post by Bauta »

It's a good idea, but keep in mind that if the indoor fans are not clean you will be expelling lots of mites inside the doll. I would recommend that even if you already have one at home, buy a new one and keep it immediately after each use so that no dust gets inside, just like a fan is stored when it is not used in summer.

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

Bauta wrote:It's a good idea, but keep in mind that if the indoor fans are not clean you will be expelling lots of mites inside the doll. I would recommend that even if you already have one at home, buy a new one and keep it immediately after each use so that no dust gets inside, just like a fan is stored when it is not used in summer.
I always store the pump in the box it came in. I put it back in there as soon as I am done with it. Then, I stick the box in a drawer until the next time. :thumbs_up:


:glou:
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

etaion99
Apprentice
Apprentice
Posts: 10
Joined: Wed Jul 18, 2018 6:17 pm
Contact:

Re: New to me method of drying…….

Post by etaion99 »

THANKS!!!!!!!

I was searching for a solution to drying the holes, other than just using a qtip. That was my first idea, and not a very good one.

Off to walmart.

etaion99
Apprentice
Apprentice
Posts: 10
Joined: Wed Jul 18, 2018 6:17 pm
Contact:

Re: New to me method of drying…….

Post by etaion99 »

If necessity is the mother of invention, then this probably ins't her most handsome child.

It IS effective, though.

$16 at Walmart for this Intex brand mattress inflator, plus a small length of tubing I had on hand, and then a small length of the insulation from a frayed old extension cord. (cleaned thoroughly, of course)

I wanted to ensure that air was indeed reaching the deepest recesses of the cavities being dried, and this does the job nicely.

Insert the extension cord portion in with the pump connected until you reach the bottom of the cavity, then back off about an inch.

Let the inflator run for 20ish minutes and voila.
Attachments
IMG_1333.jpg
IMG_1333.jpg (180.98 KiB) Viewed 1887 times

User avatar
ZebramDollImmortal
Doll Advisor
Doll Advisor
Posts: 587
Joined: Thu Oct 12, 2017 2:41 am
Location: (USA East Coast)
Contact:

Re: New to me method of drying…….

Post by ZebramDollImmortal »

Fantastic this is very helpful thank you.
Celeste JY 140cm Image
Please Read my post at the bottom TY
viewtopic.php?f=14&t=94678&p=1233777#p1233777

V3n0m777
Contributing Poster
Contributing Poster
Posts: 24
Joined: Mon Oct 08, 2018 1:32 pm
Contact:

Re: New to me method of drying…….

Post by V3n0m777 »

I got a question if you have a silicone doll with a removable insert do you need to blow air in cavity?

User avatar
Iceman707
Active Poster
Active Poster
Posts: 67
Joined: Sun Dec 18, 2016 12:55 pm
Contact:

Re: New to me method of drying…….

Post by Iceman707 »

Warning!!! --> do not attach snuggly to a fixed vagina, you could blast her open internally and damage the doll, I heard of this happening with these pumps, I would use a fan or if you use the mattress pump i like they recommendation the one guy said about attaching fish tank airline tubing since the diameter is smaller it will not make a full seal on the vagina.

Post Reply

INFORMATIONS