Starpery.com

New to me method of drying…….

Ding! POP! Crash! Thud! oops...let's get her all fixed up!
User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

New to me method of drying…….

Post by gonestill77 »

Just wanted to share this. I recently got a used DS 145+ with a new insert. I read a few times that turning it inside out to dry is a bad idea. I had an electric air pump for air mattresses etc. that I got at Kmart for like 12 bucks and I am impressed. It dried the insert in like 5 minutes. Can't wait to try it with my built in lady.


:glou:
Attachments
IMG_20170803_230933.jpg
IMG_20170803_230933.jpg (1.15 MiB) Viewed 8947 times
IMG_20170803_230955.jpg
IMG_20170803_230955.jpg (1.11 MiB) Viewed 8947 times
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

ARK ANGEL
Doll Mentor
Doll Mentor
Posts: 1514
Joined: Wed Sep 17, 2014 5:10 am
Location: Descending into oblivion.
Contact:

Re: New to me method of drying…….

Post by ARK ANGEL »

Excellent Idea, they should be selling these with every silicon/tpe doll, and in adult toy shops & catalogues, at $12.00 you can't go wrong.
Imagine how many noobs who don't brows forums, have ruined their dolls because of little or no common sense and no prior knowledge, totally unaware until they get a bladder infection. or worse.
I believe there is an old thread somewhere, where somebody used a fish tank aerator with good results, but nothing like 5 minutes, can't beat volume for evaporation.
Does it have the CFM rating written somewhere?

Pete.

User avatar
WASTENTIME
Active Poster
Active Poster
Posts: 70
Joined: Thu May 25, 2017 2:07 pm
Location: In my own world
Contact:

Re: New to me method of drying…….

Post by WASTENTIME »

That's what I have been using and it works fast. But I modified mine with the tubing from a fish pump that I cut into 3 equal lengths then wrapped tape around the 3 tubes on one end and pulled the tubes trough the adapter. That way I have 3 tubes of air coming out so I can use one for each hole or all in one. It delivers a lot more air than the fish pumps do, plus it does all 3.
A doll lift hoist that I built https://www.dollforum.com/forum/viewtop ... 6&t=126073

Why can't they make a way to hang dolls with their heads on so they are easier to store and maintain? Why can't they make fingers with joints like a toy snake? Why can't they make a 5 foot doll under 40 pounds using hollow body parts and less TPE? Why can't they make a doll stand without bolts sticking out using a bigger foot?

User avatar
jonn
Doll Advisor
Doll Advisor
Posts: 642
Joined: Tue Jul 07, 2015 6:19 pm
Contact:

Re: New to me method of drying…….

Post by jonn »

Those come with some air beds. LOL. Noisy little suckers but I guess if you don't have to leave it on for hours it isn't such a big deal.

User avatar
upsux
Doll Mentor
Doll Mentor
Posts: 1325
Joined: Sun Dec 22, 2013 1:14 pm
Location: The Potato Patch
Contact:

Re: New to me method of drying…….

Post by upsux »

A hair dryer with a cool air mode + clean oil funnel = very fast drying for inserts and cavities.

User avatar
ILuvFemsNlingerie
Doll Elder
Doll Elder
Posts: 2555
Joined: Wed Dec 17, 2008 12:00 am
Location: Louisiana
Contact:

Re: New to me method of drying…….

Post by ILuvFemsNlingerie »

I turn my TPE insert inside out to clean all the time and haven't notice any damage.

I se a micro fiber cloth to dry it off takes less that a minute to dry off.
My Dolls
Custom SM 168C (will be awhile)
WM 156 C cup (Pink) Upgraded Skeleton
DS 145+ (tan)

Heads: WM #58 (Ce Ce), YL Lori (Dahlia), 6yE N24 (Veronica), SM #55 (Asami), DS April (April), IronTech LP (Lucinda), Matedoll #21 (Cindy), WM #234 (Minka) #363 (Victoria)

All via BCD (Jeff is the man)

CeCe's and friends thread
https://www.dollforum.com/forum/viewtop ... 7#p1612387

April's thread
viewtopic.php?f=143&t=89211

User avatar
SynthetikReality95
Ex-Member
Posts: 2673
Joined: Mon Apr 18, 2016 4:15 pm

Re: New to me method of drying…….

Post by SynthetikReality95 »

you a damn genius! Funny no one ever thought of that... I've slept on my share of air beds... but never thought to use the actual air compressor thing to dry some pussy. might try that out, thanks dude :)

ARK ANGEL
Doll Mentor
Doll Mentor
Posts: 1514
Joined: Wed Sep 17, 2014 5:10 am
Location: Descending into oblivion.
Contact:

Re: New to me method of drying…….

Post by ARK ANGEL »

upsux wrote:A hair dryer with a cool air mode + clean oil funnel = very fast drying for inserts and cavities.
I do this when I give my T-babes a major soak wash, I just rudely shove the nozzle in and walk away for 10 mins to speed up the core drying time.

Pete.
.

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

Ok. Finally used this on my built in lady.

Fanfuckingtastic! :thumbs_up: :thumbs_up: :thumbs_up:

Only took 20 minutes to get her completely dry. The fan I used to use took an hour, so saving 40 minutes drying time is fucking awesome!
Highly recommend these for all your drying needs as it only takes about 6 minutes to dry my DS insert with it.


:glou:
Attachments
I finally got some!!! Now I don't have to wait as long to dry. Yay!!!
I finally got some!!! Now I don't have to wait as long to dry. Yay!!!
20180106_060534-2740x3600.jpg (996.27 KiB) Viewed 8046 times
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

User avatar
siliconelover
Doll Guru
Doll Guru
Posts: 5062
Joined: Wed Feb 06, 2008 12:00 am
Location: A Little South of Sanity ...
Contact:

Re: New to me method of drying…….

Post by siliconelover »

I've been using a Coleman camping inflator I picked up @ Target for $13.00 a decade ago. It is a high volume inflator that comes with different nozzles. Dry's my dolls out in a NY minute (silicone).

The problem I see in the above photo is that it looks as if the pump you are using is fitted tightly into the dolls vagina. Air needs to be able to flow out as much as in to dry effectively and not 'Blow Up' her vagina !
SEX, DOLLS and ROCK & ROLL

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

siliconelover wrote:I've been using a Coleman camping inflator I picked up @ Target for $13.00 a decade ago. It is a high volume inflator that comes with different nozzles. Dry's my dolls out in a NY minute (silicone).

The problem I see in the above photo is that it looks as if the pump you are using is fitted tightly into the dolls vagina. Air needs to be able to flow out as much as in to dry effectively and not 'Blow Up' her vagina !
I made sure there was air blowing back out. It wasn't as tight a fit as it looks. Thanks for trying to help me though. :thumbs_up:


:glou:
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

tanman9990
Senior Member
Senior Member
Posts: 205
Joined: Fri Nov 10, 2017 4:28 pm
Contact:

Re: New to me method of drying…….

Post by tanman9990 »

How do you put it in there without it being tight?

User avatar
gonestill77
Doll Guru
Doll Guru
Posts: 5180
Joined: Sat Jan 02, 2016 1:33 am
Location: Michigan
Contact:

Re: New to me method of drying…….

Post by gonestill77 »

tanman9990 wrote:How do you put it in there without it being tight?

By spreading her legs as much as possible. It still tight, but not too tight......


:glou:
Eve- 2016 Sanhui 145
Lucinda- 2015 DS 163 plus

Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968

tanman9990
Senior Member
Senior Member
Posts: 205
Joined: Fri Nov 10, 2017 4:28 pm
Contact:

Re: New to me method of drying…….

Post by tanman9990 »

I have two problems

1. the pump doesn't dry the whole canal. just the first three inches and beyond that there is wetness. how do i fix that?

2. the pump gets hot. I don't know if its because the pump is shit or if that is normal.

User avatar
LikeEmThicc
Senior Member
Senior Member
Posts: 361
Joined: Thu Jan 18, 2018 5:27 pm
Location: Oklahoma
Contact:

Re: New to me method of drying…….

Post by LikeEmThicc »

the compressor thing for air matresses? whoa that's helpful bruh! cool idea :)

Post Reply

INFORMATIONS