XT Doll questions

[Aeron]

XT Doll looks very interesting due to the innovations it is putting out. If XT Doll had a better selection of heads, perhaps it would also be more popular.

The only two heads that I would consider buying are XT-14 and XT-18, but as a potential customer there is not a lot of information compared to other silicone brands. I have a number of questions below that I think other customers would want to know as well. Some are for XT Doll (manufacturer) and some are review/feedback from other owners.

Manufacturer Questions

1) Since you manufacture both TPE and silicone dolls, do your silicone dolls have the TPE ball plug issue at the back of the vagina?
I ask this question since the XT Doll FAQ specifically says "It is forbidden to wash the vagina directly with a tap to prevent water from entering the pelvic skeleton."

For those not familiar, many TPE dolls have a hole at the back of the vaginal cavity due to the manufacturing process, and it is later plugged with a ball of TPE. But this ball sometimes comes loose and allows water or other fluids into the skeleton. Some manufacturers that make both TPE and silicone have a similar ball plug issue in their silicone dolls due to using a similar manufacturing process.

2) How do you adjust the stiffness of your joints?
Some manufacturers keep the joints very stiff to make them better for posing and photography. Others adjust the stiffness differently by joint to try and optimize them for usability as a sex doll. How are the joints in XT Dolls adjusted? And can customers make requests, like looser hip joints?

3) Is the realistic oral cavity a standard feature on all heads?
There are a few forum posts on TDF about the realistic mouth structure, but the website doesn't mention this feature, and it's not listed as an option either. Is this standard on all heads? And what about XT-18 which looks like the mouth is closed?

4) Where can all the options be seen?
Similar to #3, is there a place that lists all of the special features of XT Dolls and whether they are standard vs. optional? The website seems to be unreliable for information and is missing options on the order form. For example, the soft butt seems to be an option since it is listed as a promotion for the November sale ("softening rump"), but it is not listed as an option on the website. There is also the toe bone feature that was advertised on TDF last month but isn't listed on the website.

This inconsistency makes it very difficult for a potential buyer to know what is available, and a single place for a buyer to look for this information would help a lot.

5) Is there an up-to-date table showing which heads fit which bodies?
The XT-14 combo doll (silicone head/TPE body) shows a table of some heads and which bodies they can be matched with. But the table is incomplete as it does not have the 165F body or a number of heads that come on the 165F body. For example, does the XT-18 (which is a 165F doll) fit on the 168C silicone body?


Reviewer Questions (for those that have bought XT Doll)

6) How is the silicone body durability?
How durable is the body paint? And what about vagina tears? And does it have a gaping vagina when the legs are spread apart (90+ degrees)?

The last question could probably be answered by XT Dolls with a photo.

7) How is the "zero reverse thrust" feature?
Overall do you think it is good, bad, or neutral? Does it actually feel better? And does it complicate cleaning?


These are a lot of questions, but I think it would be helpful if XT Doll can answer at least #1-5, as it will help other buyers as well. The inconsistent information on the forums and website makes it very confusing for potential customers.

[Booty Call Dolls]

Hi,
You can see alot of options on
https://www.yourdoll.com/product/sex-doll-xtd027/
Scroll, scroll, scroll
I did not see the toe bone option.

[Ray_XTdoll]

XT Doll looks very interesting due to the innovations it is putting out. If XT Doll had a better selection of heads, perhaps it would also be more popular.

The only two heads that I would consider buying are XT-14 and XT-18, but as a potential customer there is not a lot of information compared to other silicone brands. I have a number of questions below that I think other customers would want to know as well. Some are for XT Doll (manufacturer) and some are review/feedback from other owners.

Manufacturer Questions

1) Since you manufacture both TPE and silicone dolls, do your silicone dolls have the TPE ball plug issue at the back of the vagina?
I ask this question since the XT Doll FAQ specifically says "It is forbidden to wash the vagina directly with a tap to prevent water from entering the pelvic skeleton."

For those not familiar, many TPE dolls have a hole at the back of the vaginal cavity due to the manufacturing process, and it is later plugged with a ball of TPE. But this ball sometimes comes loose and allows water or other fluids into the skeleton. Some manufacturers that make both TPE and silicone have a similar ball plug issue in their silicone dolls due to using a similar manufacturing process.

Why do some manufacturers need to plug a ball into the vagina? The reason is the manufacturing technique required.
(1-1) The old manufacturing technique binds the mold of the vagina to the skeleton directly. When the mold was been removed, the vagina channel will be created. But at the same time, another tiny channel between the vagina and the skeleton was made too. The tiny hole must be blocked by a ball to prevent the water from going into the skeleton. To be honest, the ball can't keep the water out if you use high-press water equipment to flush the vagina.
(1-2) The new manufacturing technique binds the mold of the vagina to the body mold. There is no connection between the vagina and the skeleton, so it doesn't need to do anything. It's safer than the old production process.
(1-3)XTdoll is using the new manufacturing technique, so we don't need to plug any ball inside of the vagina.



2) How do you adjust the stiffness of your joints?
Some manufacturers keep the joints very stiff to make them better for posing and photography. Others adjust the stiffness differently by joint to try and optimize them for usability as a sex doll. How are the joints in XT Dolls adjusted? And can customers make requests, like looser hip joints?

(2-1) The tightness of the skeleton joints is adjusted when making the skeleton, and we usually follow the normal tightness. If you wish to notify us in advance of joint loosening or stiffness. The customer can't change the tightness after the doll is made.

3) Is the realistic oral cavity a standard feature on all heads?
There are a few forum posts on TDF about the realistic mouth structure, but the website doesn't mention this feature, and it's not listed as an option either. Is this standard on all heads? And what about XT-18 which looks like the mouth is closed?


(3-1) All our heads have a realistic structure. It's the default option. But it's not that all of the heads have movable jaws. XT-18 has no. Please be noticed that only the movable jaw head has oral sex function. Because it's easy to damage when using the function if the mouth can't open wide enough. You can see the heads list below:




4) Where can all the options be seen?
Similar to #3, is there a place that lists all of the special features of XT Dolls and whether they are standard vs. optional? The website seems to be unreliable for information and is missing options on the order form. For example, the soft butt seems to be an option since it is listed as a promotion for the November sale ("softening rump"), but it is not listed as an option on the website. There is also the toe bone feature that was advertised on TDF last month but isn't listed on the website.


(4-1) I am sorry for our bad work. We spend most of our time on innovation. We have lots of communication work not to do well. We will update all information on our website and TDF in the month.
For our innovation speed, the options list will be updated fast. Below is our current option table:




This inconsistency makes it very difficult for a potential buyer to know what is available, and a single place for a buyer to look for this information would help a lot.

5) Is there an up-to-date table showing which heads fit which bodies?
The XT-14 combo doll (silicone head/TPE body) shows a table of some heads and which bodies they can be matched with. But the table is incomplete as it does not have the 165F body or a number of heads that come on the 165F body. For example, does the XT-18 (which is a 165F doll) fit on the 168C silicone body?


(5-1) Please find the information you need from below table:



Reviewer Questions (for those that have bought XT Doll)

6) How is the silicone body durability?
How durable is the body paint? And what about vagina tears? And does it have a gaping vagina when the legs are spread apart (90+ degrees)?


(6-1) For avoiding to damage in use, many dolls have a wide entrance of the vagina. The silicone material has less ductility than TPE, so it's easy to tear. We are working on this, a new vagina structure will be available soon.
The service life will get longer plainly. The gaping shows when the legs open in this stage.
(6-2) About the durability of the paint, we have cost much more than other brands. We use 3 times of makeup-fixing materials than normal usage, it's very expensive. And the 3 layers makeup process makes it more strong.
So you needn't worry about the issue.
(6-3) The coming new vagina structure will protect you from tearing the vagina easily.



The last question could probably be answered by XT Dolls with a photo.

7) How is the "zero reverse thrust" feature?
Overall do you think it is good, bad, or neutral? Does it actually feel better? And does it complicate cleaning?

(7-1) The "zero reverse thrust" feature improves your using feeling markedly. I think the use of experience is as important as the beautiful appearance. The cleaning is the same as the normal one.
(7-2) We are trying to paly as the user for future innovation. You will see more and more innovation in the doll's production. These will help the customers have more use of experience.


These are a lot of questions, but I think it would be helpful if XT Doll can answer at least #1-5, as it will help other buyers as well. The inconsistent information on the forums and website makes it very confusing for potential customers.

[Aeron]

[...]

(6-3) The coming new vagina structure will protect you from tearing the vagina easily.

Thank you for the extensive response. I will be considering XT Doll for my next purchase.

As for (6-3), that looks really good with none of the usual gaping. Maybe you mold the doll with the legs spread?

When do you expect this new vagina structure to be available? I am trying to make a decision soon and would like to know how long I would need to wait for this to be available on the silicone 168C.

[Coeros]

XT Doll looks very interesting due to the innovations it is putting out. If XT Doll had a better selection of heads, perhaps it would also be more popular.

The only two heads that I would consider buying are XT-14 and XT-18, but as a potential customer there is not a lot of information compared to other silicone brands. I have a number of questions below that I think other customers would want to know as well. Some are for XT Doll (manufacturer) and some are review/feedback from other owners.

Manufacturer Questions

1) Since you manufacture both TPE and silicone dolls, do your silicone dolls have the TPE ball plug issue at the back of the vagina?
I ask this question since the XT Doll FAQ specifically says "It is forbidden to wash the vagina directly with a tap to prevent water from entering the pelvic skeleton."

For those not familiar, many TPE dolls have a hole at the back of the vaginal cavity due to the manufacturing process, and it is later plugged with a ball of TPE. But this ball sometimes comes loose and allows water or other fluids into the skeleton. Some manufacturers that make both TPE and silicone have a similar ball plug issue in their silicone dolls due to using a similar manufacturing process.

Why do some manufacturers need to plug a ball into the vagina? The reason is the manufacturing technique required.
(1-1) The old manufacturing technique binds the mold of the vagina to the skeleton directly. When the mold was been removed, the vagina channel will be created. But at the same time, another tiny channel between the vagina and the skeleton was made too. The tiny hole must be blocked by a ball to prevent the water from going into the skeleton. To be honest, the ball can't keep the water out if you use high-press water equipment to flush the vagina.
(1-2) The new manufacturing technique binds the mold of the vagina to the body mold. There is no connection between the vagina and the skeleton, so it doesn't need to do anything. It's safer than the old production process.
(1-3)XTdoll is using the new manufacturing technique, so we don't need to plug any ball inside of the vagina.



2) How do you adjust the stiffness of your joints?
Some manufacturers keep the joints very stiff to make them better for posing and photography. Others adjust the stiffness differently by joint to try and optimize them for usability as a sex doll. How are the joints in XT Dolls adjusted? And can customers make requests, like looser hip joints?

(2-1) The tightness of the skeleton joints is adjusted when making the skeleton, and we usually follow the normal tightness. If you wish to notify us in advance of joint loosening or stiffness. The customer can't change the tightness after the doll is made.

3) Is the realistic oral cavity a standard feature on all heads?
There are a few forum posts on TDF about the realistic mouth structure, but the website doesn't mention this feature, and it's not listed as an option either. Is this standard on all heads? And what about XT-18 which looks like the mouth is closed?


(3-1) All our heads have a realistic structure. It's the default option. But it's not that all of the heads have movable jaws. XT-18 has no. Please be noticed that only the movable jaw head has oral sex function. Because it's easy to damage when using the function if the mouth can't open wide enough. You can see the heads list below:




4) Where can all the options be seen?
Similar to #3, is there a place that lists all of the special features of XT Dolls and whether they are standard vs. optional? The website seems to be unreliable for information and is missing options on the order form. For example, the soft butt seems to be an option since it is listed as a promotion for the November sale ("softening rump"), but it is not listed as an option on the website. There is also the toe bone feature that was advertised on TDF last month but isn't listed on the website.


(4-1) I am sorry for our bad work. We spend most of our time on innovation. We have lots of communication work not to do well. We will update all information on our website and TDF in the month.
For our innovation speed, the options list will be updated fast. Below is our current option table:




This inconsistency makes it very difficult for a potential buyer to know what is available, and a single place for a buyer to look for this information would help a lot.

5) Is there an up-to-date table showing which heads fit which bodies?
The XT-14 combo doll (silicone head/TPE body) shows a table of some heads and which bodies they can be matched with. But the table is incomplete as it does not have the 165F body or a number of heads that come on the 165F body. For example, does the XT-18 (which is a 165F doll) fit on the 168C silicone body?


(5-1) Please find the information you need from below table:



Reviewer Questions (for those that have bought XT Doll)

6) How is the silicone body durability?
How durable is the body paint? And what about vagina tears? And does it have a gaping vagina when the legs are spread apart (90+ degrees)?


(6-1) For avoiding to damage in use, many dolls have a wide entrance of the vagina. The silicone material has less ductility than TPE, so it's easy to tear. We are working on this, a new vagina structure will be available soon.
The service life will get longer plainly. The gaping shows when the legs open in this stage.
(6-2) About the durability of the paint, we have cost much more than other brands. We use 3 times of makeup-fixing materials than normal usage, it's very expensive. And the 3 layers makeup process makes it more strong.
So you needn't worry about the issue.
(6-3) The coming new vagina structure will protect you from tearing the vagina easily.



The last question could probably be answered by XT Dolls with a photo.

7) How is the "zero reverse thrust" feature?
Overall do you think it is good, bad, or neutral? Does it actually feel better? And does it complicate cleaning?

(7-1) The "zero reverse thrust" feature improves your using feeling markedly. I think the use of experience is as important as the beautiful appearance. The cleaning is the same as the normal one.
(7-2) We are trying to paly as the user for future innovation. You will see more and more innovation in the doll's production. These will help the customers have more use of experience.


These are a lot of questions, but I think it would be helpful if XT Doll can answer at least #1-5, as it will help other buyers as well. The inconsistent information on the forums and website makes it very confusing for potential customers.

Very detailed answer, great!

[jeep2639]

Is the new vagina (that tears less easily) available in the new 168C Chloe body? If the answer is yes, I’m buying tomorrow. Seriously.

[Booty Call Dolls]

Great job!

[blacknblueballs69]

A few more question for XTDolls.

Is there a reason why resellers like Rosemarydoll (RMD) don't show any options or choices for the doll head other than the default? For example I really like the 168cm C-cup body but I would prefer a head other than Chloe, like Nancy or Irina. But at RMD the 168cm doll is automatically configured with the Chloe head and there are no other options to replace it. I'm sure a person could message or call RMD and make the necessary changes but there should be options available when configuring the doll before ordering. It is the same at lovedollsenpai and come to think of it your own site as well.

I'm also curious about the new vagina and when it will be available? Is it a new material? Will the butthole also be updated? Will all dolls get the updated design going forward?

Thanks!

[jeep2639]

A few more question for XTDolls.

Is there a reason why resellers like Rosemarydoll (RMD) don't show any options or choices for the doll head other than the default? For example I really like the 168cm C-cup body but I would prefer a head other than Chloe, like Nancy or Irina. But at RMD the 168cm doll is automatically configured with the Chloe head and there are no other options to replace it. I'm sure a person could message or call RMD and make the necessary changes but there should be options available when configuring the doll before ordering. It is the same at lovedollsenpai and come to think of it your own site as well.

I'm also curious about the new vagina and when it will be available? Is it a new material? Will the butthole also be updated? Will all dolls get the updated design going forward?

Thanks!

Funny that your choices are Nancy and Irina, because those are exactly the ones I’m ordering, except that I’m ordering it on the 163F body. RMD are very easy to communicate with. Just emails them. You get an immediate auto reply acknowledging receipt of your message, and they typically answer within 12 hours. My guess is that you can ask to get other heads on the 168C body and they will accommodate. I initially wanted to get the Fanreal 158B body with the scaled down Maria and Della heads. I love B-Cup… but the XT 168C is 8lb lighter, and the 163F is another 10lb lighter. Given my bad experience with my first 112lb doll, weight is going to be an issue. Now, the 168C body looks just a little better than the 163F, but frankly, those C-cups look bigger than C-cups. Plus, I like the look and location of the 163F F-cups nipples more than the look and location of the 168 C-cups (and you’re hearing it from a man who prefers B or even A cups… I just got the last replies from RMD, and will place the order today. I will start a new thread once I do.

BTW, I also reached out to XT Doll, who have been very responsive too, to ask about the 168C vs. the 163F, and they said that the 163F is very new and advanced, and recommended it more than the 168C. I was thinking about waiting for the new vagina, but decided not too. I will likely get sexually intimate with her 2-3 times a week. I’m guessing the current vagina (especially since I’m choosing the ultra soft one) would hold long enough..l

Again, just reach out to RMD and ask. I’m sure they can accommodate you through a note in the note section.

[blacknblueballs69]

Funny that your choices are Nancy and Irina, because those are exactly the ones I’m ordering

I guess we both have great taste.

I considered putting in an order during the BF sale but eventually decided to hold off as I really want to see the upgraded vagina.

Now, the 168C body looks just a little better than the 163F, but frankly, those C-cups look bigger than C-cups.

I thought the exact same thing, even created a few side by side pics to compare the two.
https://imgbox.com/iq7AEQaD
https://imgbox.com/HhuzZOBe
https://imgbox.com/2YHuKrf2

I also reached out to XT Doll, who have been very responsive too, to ask about the 168C vs. the 163F, and they said that the 163F is very new and advanced, and recommended it more than the 168C

Did they give any details and explain the differences between the two?

Thanks!

[jeep2639]

Man, you are very much like me. I can see we have similar taste even in the dolls you have in your signature block.
I asked XT when to expect the new vagina, but I’m not going to wait (unless they tell me “next week…” im ordering the ultra soft vagina and expect to be “using it” 2-3 times a week—I’d be surprised if it tears too easily. Also, with their “reverse thrust” vagina, if the force required to push into it is a third of what it takes to push into a regular one, there is less silicon resistance, I guess.

Plus, there will always be more innovation from them. They seem to be always innovating. Frankly, I would care more about them releasing a B-cup doll than the new vagina.

They didn’t specify differences between the 168 and the 163. Just said the 163 is newer, more advanced, and in higher demand. So, fingers crossed, order going out today.

[jeep2639]

Just got the following answer from XT Doll about the new vagina:
"The new stronger vagina had been added to the Zero reverse thrust vagina(it will be free offer in this month). If you purchase during the time, the new stronger vagina structure is available for you."
Since I'm ordering the zero reverse thrust (sound more like rocket science to me...), then I do get the new vagina.

On another note, they also said they are working on a 159A and 156B for next year. That might be my next one. But for now--I will be placing the 163F order today! I will open a new thread once the order is placed.

[jeep2639]

I just placed the order, and started a new thread, where I will cover the experience from the moment I ordered: viewtopic.php?t=174208

[Ray_XTdoll]

I just placed the order, and started a new thread, where I will cover the experience from the moment I ordered: viewtopic.php?t=174208

Thanks for your order. We will update your order in TDF. You can see how your doll is made in the manufactory step by step.

[jeep2639]

I just placed the order, and started a new thread, where I will cover the experience from the moment I ordered: viewtopic.php?t=174208

Thanks for your order. We will update your order in TDF. You can see how your doll is made in the manufactory step by step.

Thank you! That would be amazing!