From The behind- Galatea doll Love hole placement

[nahmot]

Hello Galatea Team.

This post is a love letter, because I believe vendors should be rewarded when they do good.

I took a chance and purchased your model GT-05... and her love hole placement is perfection! I congratulate your engineering team, and beg you to do more of this.

Now, here's the tough-love part. Your marketing of this achievement sucks. It's not just you. Shopping for good LHP in this landscape is hard, mostly because the pictures suck—including the ones in here. By "suck" I don't mean they're bad pictures; I understand that you want to present the doll in a tasteful manner... I get it. But at the same time, if I'm going to spend north of 2K, I need a good sense of the doll's hole placement in three dimensions.

Now, I'm not telling you what to do, and maybe customers like me are too small for consideration, but if you want to capture this cohort of the market, this is what we want to see.

We want to see the doll in a bent-over position with the genitals clearly visible. Like this.

09-IMG_1397.JPG

We want to see how far the hole is recessed (ie. how much meat we have to push through to "fully interface" with the doll.)

IMG_1404.JPG

And (I get that this one is a bit of an ask) the angle of entry as indicated by the pencil.

IMG_1401.JPG

This is why some ask for a view on the doll's back; what they're trying to suss is if the vagina is accessible in both doggy and missionary positions, which is easily answered with a pencil.

The gist of it all is three dimensions.

I know I layed a lot on you, and I don't expect anything to change, but I had to get it out just the same. This is my 6th doll, and she by far has the best LHP I've seen in the upper-middle-tier doll market and deserves some recognition.

Thank you for suffering my rant. And good job on GT-05.

But, your beautiful pictures suck (and, yes, I've seen all of them).

Very well put and seconded by me , this is exactly the type of information all manufacturers need to present in future. this is where we will be interacting with the doll most meaningfully, we need a proper look and a demo of entry angle as you have shown. Imagine buying a car without ever seeing the interior apart from half shots of it

[Galatea Doll]

Hello Galatea Team @Galatea Doll

This post is a love letter, because I believe vendors should be rewarded when they do good.

I took a chance and purchased your model GT-05... and her love hole placement is perfection! I congratulate your engineering team, and beg you to do more of this.

Now, here's the tough-love part. Your marketing of this achievement sucks. It's not just you. Shopping for good LHP in this landscape is hard, mostly because the pictures suck—including the ones in here. By "suck" I don't mean they're bad pictures; I understand that you want to present the doll in a tasteful manner... I get it. But at the same time, if I'm going to spend north of 2K, I need a good sense of the doll's hole placement in three dimensions.

Now, I'm not telling you what to do, and maybe customers like me are too small for consideration, but if you want to capture this cohort of the market, this is what we want to see.

We want to see the doll in a bent-over position with the genitals clearly visible. Like this.

09-IMG_1397.JPG

We want to see how far the hole is recessed (ie. how much meat we have to push through to "fully interface" with the doll.)

IMG_1404.JPG

And (I get that this one is a bit of an ask) the angle of entry as indicated by the pencil.

IMG_1401.JPG

This is why some ask for a view on the doll's back; what they're trying to suss is if the vagina is accessible in both doggy and missionary positions, which is easily answered with a pencil.

The gist of it all is three dimensions.

I know I layed a lot on you, and I don't expect anything to change, but I had to get it out just the same. This is my 6th doll, and she by far has the best LHP I've seen in the upper-middle-tier doll market and deserves some recognition.

Thank you for suffering my rant. And good job on GT-05.

But, your beautiful pictures suck (and, yes, I've seen all of them).

Thank you so much for your kind words and thoughtful feedback! We truly appreciate customers like you who take the time to share their experiences. We're delighted to hear that you're happy with the love hole placement on GT-05—our engineering team puts great effort into designing for both realism and functionality, and they will be thrilled to receive your praise.

We also hear you loud and clear on the marketing side. Striking the right balance between tasteful presentation and informative visuals is always a challenge, but we understand how important clear, detailed images are when making a purchase decision. Your input is valuable, and we’ll certainly take it into consideration as we continue refining how we showcase our products.

Thanks again for your support, and we hope you continue to enjoy your Galatea Doll! If you ever have any questions or further suggestions, feel free to reach out.

[Galatea Doll]

Hello Galatea Team.

This post is a love letter, because I believe vendors should be rewarded when they do good.

I took a chance and purchased your model GT-05... and her love hole placement is perfection! I congratulate your engineering team, and beg you to do more of this.

Now, here's the tough-love part. Your marketing of this achievement sucks. It's not just you. Shopping for good LHP in this landscape is hard, mostly because the pictures suck—including the ones in here. By "suck" I don't mean they're bad pictures; I understand that you want to present the doll in a tasteful manner... I get it. But at the same time, if I'm going to spend north of 2K, I need a good sense of the doll's hole placement in three dimensions.

Now, I'm not telling you what to do, and maybe customers like me are too small for consideration, but if you want to capture this cohort of the market, this is what we want to see.

We want to see the doll in a bent-over position with the genitals clearly visible. Like this.

09-IMG_1397.JPG

We want to see how far the hole is recessed (ie. how much meat we have to push through to "fully interface" with the doll.)

IMG_1404.JPG

And (I get that this one is a bit of an ask) the angle of entry as indicated by the pencil.

IMG_1401.JPG

This is why some ask for a view on the doll's back; what they're trying to suss is if the vagina is accessible in both doggy and missionary positions, which is easily answered with a pencil.

The gist of it all is three dimensions.

I know I layed a lot on you, and I don't expect anything to change, but I had to get it out just the same. This is my 6th doll, and she by far has the best LHP I've seen in the upper-middle-tier doll market and deserves some recognition.

Thank you for suffering my rant. And good job on GT-05.

But, your beautiful pictures suck (and, yes, I've seen all of them).

Very well put and seconded by me , this is exactly the type of information all manufacturers need to present in future. this is where we will be interacting with the doll most meaningfully, we need a proper look and a demo of entry angle as you have shown. Imagine buying a car without ever seeing the interior apart from half shots of it

[phil3stine]

Thank you so much for your kind words and thoughtful feedback! We truly appreciate customers like you who take the time to share their experiences. We're delighted to hear that you're happy with the love hole placement on GT-05—our engineering team puts great effort into designing for both realism and functionality, and they will be thrilled to receive your praise.

We also hear you loud and clear on the marketing side. Striking the right balance between tasteful presentation and informative visuals is always a challenge, but we understand how important clear, detailed images are when making a purchase decision. Your input is valuable, and we’ll certainly take it into consideration as we continue refining how we showcase our products.

Thanks again for your support, and we hope you continue to enjoy your Galatea Doll! If you ever have any questions or further suggestions, feel free to reach out.

Thank you very much!

And just to let you know, I'll be putting that GT-05 (with JS #116 head) on blast after I complete my photoshoot.

03-IMG_1300-small.JPG (912.9 KiB) Viewed 168 times

[Galatea Doll]

Thank you so much for your kind words and thoughtful feedback! We truly appreciate customers like you who take the time to share their experiences. We're delighted to hear that you're happy with the love hole placement on GT-05—our engineering team puts great effort into designing for both realism and functionality, and they will be thrilled to receive your praise.

We also hear you loud and clear on the marketing side. Striking the right balance between tasteful presentation and informative visuals is always a challenge, but we understand how important clear, detailed images are when making a purchase decision. Your input is valuable, and we’ll certainly take it into consideration as we continue refining how we showcase our products.

Thanks again for your support, and we hope you continue to enjoy your Galatea Doll! If you ever have any questions or further suggestions, feel free to reach out.



Thank you very much!

And just to let you know, I'll be putting that GT-05 (with JS #116 head) on blast after I complete my photoshoot.

03-IMG_1300-small.JPG

Lovely

[Booty Call Dolls]

@phil3stine,
Thank you for showing her off!

[Nitro_Doogle]

Hello Galatea Team @Galatea Doll

This post is a love letter, because I believe vendors should be rewarded when they do good.

I took a chance and purchased your model GT-05... and her love hole placement is perfection! I congratulate your engineering team, and beg you to do more of this.

Now, here's the tough-love part. Your marketing of this achievement sucks. It's not just you. Shopping for good LHP in this landscape is hard, mostly because the pictures suck—including the ones in here. By "suck" I don't mean they're bad pictures; I understand that you want to present the doll in a tasteful manner... I get it. But at the same time, if I'm going to spend north of 2K, I need a good sense of the doll's hole placement in three dimensions.

Now, I'm not telling you what to do, and maybe customers like me are too small for consideration, but if you want to capture this cohort of the market, this is what we want to see.

We want to see the doll in a bent-over position with the genitals clearly visible. Like this.

09-IMG_1397.JPG

We want to see how far the hole is recessed (ie. how much meat we have to push through to "fully interface" with the doll.)

IMG_1404.JPG

And (I get that this one is a bit of an ask) the angle of entry as indicated by the pencil.

IMG_1401.JPG

This is why some ask for a view on the doll's back; what they're trying to suss is if the vagina is accessible in both doggy and missionary positions, which is easily answered with a pencil.

The gist of it all is three dimensions.

I know I layed a lot on you, and I don't expect anything to change, but I had to get it out just the same. This is my 6th doll, and she by far has the best LHP I've seen in the upper-middle-tier doll market and deserves some recognition.

Thank you for suffering my rant. And good job on GT-05.

But, your beautiful pictures suck (and, yes, I've seen all of them).

Hi Phil,

I 100 percent agree. These pics look absolutely amazing and yet there are very few pictures like this from most doll manufacturers.

Great work.

T