The Doll Forum

Hey All, I recently received my CrownPeaks breast toy and make a quick review for anyone who might still be on the fence about getting one. I will also detail my method for mounting the breast plate onto a doll.

First, I want to give a few shoutouts:

• Jeff from BCD for being an awesome vendor to work with, as always, when I was ordering my YL-158.
  Xavier from CrownPeaks for answering all my questions promptly and for satisfying all my order requests.

Also, the following TDF members for the reviews of their purchases. You guys definitely helped me decide to take the plunge:

• guyman2123: Crownpeaks Breast toy - BETTER than Aichan and Ruby!
  AJ2487: Custom Made Crownpeaks Breasts Toy!!!
  Joe_Normal: Another Crown Peaks Custom Review
  Mcupplease: CP Breastforms - Best New Technology of 2019. Soft as human.

Order Timeline:

• Jan. 5: Reached out to CrownPeaks' Xavier about custom requests. I was hoping to commission the production of a breast plate with straps to facilitate mounting to a doll. He said the due to lack of manpower and back orders, R&D is on hold for now, but thinks it will resume within the next 2-3 months.
  Jan. 7: Purchased a L-Cup with medium skin tone. I was told I was 3rd in queue and the shipment ETA would be around Jan. 17th.
  Jan. 15: L-Cup finished.
  Jan. 16: Shipped.
  Jan. 21: L-Cup received.

Before I placed my order, I brought up the issue that some members were reporting their shipment boxes had arrived in a poor/broken state. Xavier assured me that he and his team has taken the necessary precautions to prevent these future mishaps and sure enough my order was first placed in a thick, black, plastic bag before being placed in a box with bubble wrap. As an extra precaution, they also taped the entire outside of the box. There was no way for box to become broken/opened unless someone went at it with a knife. The shipper's information was completely inconspicuous; only listed as "CP LLC":
Once I received the L-Cup, I gave it a quick wash and went to work prepping my YL-158 for her upgrade. I removed her breast and placed the breast plate about where I thought would be the ideal position for a natural look.

Once I was satisfied with the position, I held them in place with a 40 M-Cup bra. Then I applied a "sil-poxy" silicone adhesive between the plate and the doll around the top border. The product states that the curing time is 12 minutes, but based on experience with it in the past, I left it for about an hour. After the hour, I applied adhesive to the rest of the area under the breast plate.

The adhesive I used was purchased from Amazon: Smooth-On SIL-Poxy Silicone Adhesive - 3 Ounce Tube
I have used this adhesive successfully on many previous modifications.

CAUTION: If you decide to emulate this process, there are a few things you should keep in mind:

• 1. The "surgery room" should be well ventilated. The adhesive gives off a very strong odor while it's curing. I would avoid breathing it in.
  2. Make sure you plan ahead of time before applying any of the adhesive. Things can go really wrong, really quick. You should have the breast plate in its desired position before using any adhesive and only apply just enough so that it doesn't flow from underneath the plate. If this stuff gets on clothing or carpet, it's near impossible to remove. You. Have. Been. Warned.
  3. Once the adhesive is in place, leave it alone. I know you will be tempted to inspect your placement and even cop a feel or two, but it's best to leave it alone and forget about it for at least 2 hours. That way you know it is full cured and secured in place. Leaving it alone also allows for the adhesive odor to dissipate.

Final Verdict:

The L-Cups have turned my already awesome YL-158 into an amazing piece of art. They are so incredible soft and life-like. I have owned the Busty Ai-Chans, the Chi-Chi Fuetas as well as a few others and in my opinion, they do not come close in comparison as far as groping sensation goes. As many other owners have stated in their reviews, photos and videos do not do them any justice; these things are massive. I currently have them held in place with a 40 M-Cup bra, but I ordered a size up for a proper fitting. Hopefully, these before and after pictures will help illustrate their size relative to a doll:
I do not intend on taking any sexual pictures/videos with the breasts, so please do not ask.

I hope you found this review and these pictures helpful. Let me know if you have any questions. I will answer the best I can.

Good luck in your endeavors!

hah! love the idea .. was contemplating doing this procedure... how well would it work on a 100cm doll ..

That looks amazing! Can you post some more after photos, showing her from different angles and in different tops?

Really good work. You will inspire a lot of people with this.

Looks AMAZING!!! Would love to see more of her.

This combo is looking great no comparison to before, please show us more photos maybe without bra in different
angles .

To better get a sense of the change, I made this animated gif.

But we really need more pictures.

Looks great! Great job, review, and details throughout.
I'm guessing nudes to see how they look out of the bra, are going to be considered sexual?
Or would you consider those educational to see the attachment and how they look/hang/sag
more educational(as I would and have done with my ladies check out Holly)?
If nude to see these views, get a better idea, are to sexual.
Would you consider dressing her minus the bra to see how they look?
Straight on, side, and maybe leaning?
I hope and look forward to seeing more from you.
Thank you very much and have a great day.

subcom117 wrote:A great beginning. Please show us more photos of her now and of how you performed this surgery on her.

Sorry Subcom, due to the time sensitivity, I didn't have much time to stop to take pictures. I definitely did not want to take off my gloves in the middle of the "surgery." I tried to be as detailed as possible in my previous post, but if you need me to elaborate further, I'll try.

CF wrote:That looks amazing! Can you post some more after photos, showing her from different angles and in different tops?
Really good work. You will inspire a lot of people with this.

sv wrote:Looks AMAZING!!! Would love to see more of her.

sophiahugeboobs wrote:This combo is looking great no comparison to before, please show us more photos maybe without bra in different
angles .

GreatPair wrote:Looks great! Great job, review, and details throughout.
...Would you consider dressing her minus the bra to see how they look?
Straight on, side, and maybe leaning?
I hope and look forward to seeing more from you.
Thank you very much and have a great day.

Thanks, guys. Hopefully, someone out there found this thread helpful and will purchase a breast plate from CrownPeaks to support future R&D projects. I am actually considering getting one in each size lol

I took a bunch a pictures from different angles and in different outfits. I hope this will satisfy you guys because the breast plate adds an extra 20lb.+ to the already 120lb. YL-158. Moving her takes some serious effort, so I don't intend doing another photoshoot for a while.

I just layered the outfits in order to minimize the need to move her every time I wanted to change a top.

Hopefully, I won't get muted/banned for spamming these photos. If you guys don't hear from me in a while, you know why lol

Enjoy!

Looks like the preview is displayed sideways, but if you open the pictures up in a new tab, they should display in the correct orientation.

Enjoy!

Thanks a lot, these photos really help us.

When you're confident that everything has sealed properly, can you please get some photos of her topless, and perhaps share any photos of where the CrownPeaks has been affixed to her, to illustrate the connection points? A lot of us are hoping to replicate your success.

Again, great work. This is the most exciting new doll design we've seen this year.

Thank you for the photos. Please keep them coming!

Do the Crownpeaks feel as good as they are said to be?

Here's another animated gif to illustrate how your gal looks, for the benefit of the rest of us. She must be a joy to come home to!

CF wrote:Thank you for the photos. Please keep them coming!

Do the Crownpeaks feel as good as they are said to be?

Here's another animated gif to illustrate how your gal looks, for the benefit of the rest of us. She must be a joy to come home to!

Yes! They absolutely do. I'm still amazed at how lifelike they feel and look.

Here's a nude gif for ya! I'm keeping her in a see-through top to keep them supported.

Good Lord, she's beautiful.

Thanks for these. Keep them coming! Can't wait to see some fully nude shots so we understand how they look on her body, and how far they come down on her waist.

Question: Do you think they could be applied to a doll without cutting off the original breasts?

If not, maybe one route might be to buy a small-breasted doll to start with, so the chest wall is somewhat flat to begin with.