As long as I remember after I joined that forum in 2016, I always wanted to get myself an Irontech doll. I owned many dolls up to this day, but never had an Irontech one. Why?
Irontech has the sexiest doll sculpts around. Their ladies have full breasts, meaty butts and their body limbs ratio are top notch. All these good things mean though that their weight is on the high side. Many of their gorgeous dolls were well over 90 pounds, which was out of reach for me.
This is why I got excited when they released the SG-T-003 Torso. That torso offers a typical Irontech busty gal, but at a fraction of the weigh for the obvious reasons.
So I convinced myself into ordering that torso angel to benefit from that busty body without breaking my back under the weight.
For those who played with torso here, you will know what I am talking about:
- Torsos can switch positions at lighting speed since you do not need to worry about damaging fingers, nails, elbows, knees, toes, ankles and so on. You flip her around and she will follow. Nothing to break here.
- They are way easier to maintain. I drop the torso in the bath in an inch of water and just flip it around without effort while cleaning it with my hand and soap.
- They are way smaller to store and hide!
- They are way lighter to manipulate. Doing cowgirl with a full-size doll is quite a workout, while doing it with a torso is very easy.
Briefly there are many advantages to torsos if you do not mind the missing limbs. Do not get me wrong here, full dolls are awesome as well, but I did find many advantages to torso when you want simpler and shorter interactions while keeping the maintenance light. So there are days for dolls, and other for torsos.
So I did pull the trigger on the silicon SG-T-003 and I am delighted.
Ordering and shipping
I did pass the order with Emma at Irontech on July 9th, and she was ready to be shipped through UPS on July 26th, which is very reasonable.
I ordered her as follows:
Tan: Tan Skin
Breast: Gel
Butt: Gel
Nipple and labia color: Light Brown
Areola size: 4cm
Vagina hair: #2
Vagina insert: Fixed
Vagina texture: #1
Body makeup: Full body painting.
Head: Luna S17 ROS
Eyes: Brown
Wig: W11
Emma kept the communication flowing and the box got delivered at my doorstep in mint condition. Irontech now use molded foam to keep their dolls from moving around in their boxes, which will dramatically reduce the chance of getting damaged. I also took the option to let them deal with the custom, which is a very nice service if you ask me. Who likes dealing with customs anyway?
Size and weight
I named that little synthetic gal Jenny. Other than missing arms and legs, she shares the same torso size as any other full-size doll. Jenny has full breasts, a yummy butt (more on this later …MY GOD) and nice meaty thighs.
Naked with the head on, she weights exactly 66.8 pounds on my scale, which is not super light by any means. However, the fact that she has no limbs concentrate all the weight to the middle, making her WAY easier to handle.
Silicon
I was pleasantly surprised by the silicon softness. You will also notice that she does not shine on picture since the skins is lightly textured. After powdering her, she transformed into a silky body queen.
Body painting
Jenny has full body painting that was not too aggressive. She has light freckles and veins all around the body that can be better seen on the factory pictures due to light. I think that these skin details should be a bit darker, but I guess you just need to tell the vendor while ordering. You will also notice that I did not keep the original freckles in the face and asked the artist to remove these.
Skeleton
Torsos with skeletons that have stump legs are the best. The skeleton will let you position her differently depending of what you are trying to achieve. Her movements range is the same as a full-size doll. She can twist and arch her back, raise and lower her legs and move her head in all direction. My bet is that she has the standard EVO skeleton with shorter legs and no arms.
One thing that Irontech should take note about here. The joints between the legs and hip should be tighter. After owning her for few weeks now, she can no longer sit by herself since the legs are loose. She will not always keep her position, depending of the joint that is under pressure. So nothing major here, but the legs should be tighter by default.
Head
I was a bit disappointed with the head. I did order the S17 Luna, which is gorgeous, but turns out that the ROS version of that head looks very different due to the jaw structure. The ROS version of the S17 have some kinds of a mouth breather look that I do not like much. I cannot completely close her mouth, and the lips are not as full as the standard one. I did this error twice actually. So as a piece of advice, if you intend to order a ROS head, ask to see a manufacturing picture of that specific ROS head. They usually look very different than the NON ROS ones.
There is absolutely nothing wrong with the head though. It does have full mouth structure with the tongue and everything … but it just does not look as good as I thought it would. Also the face does not deform when penetrated, which is the nightmare with normal TPE heads.
Another thing that is worth mentioning. The circumference of the neck on that torso is bigger than I am used too. Screwing the head in place is a challenge. The M3 bolt is on the short side considering the dept of the head and neck sockets. It can be done, but I must spend more effort than I do with any other dolls. A longer M3 bolt would fix the issue.
Breast
Jenny has full breasts, and they feel AWESOME … not too big .. not too small. I really like the breast sculpts of Irontech. Their designers are titties lover for sure!
I would say that she is a E cup, but I will update the thread as soon as I know more about her clothing size. Every years, our synthetic gal’s breast feels closer and closer to the real thing, and Jenny is not any different. You can motorboat these puppies until you die from thirst.
Butt
Jenny’s ass is by far her best feature. Her butt is bigger than I thought, but in a GOOD way. It is difficult to see on pictures how full and juicy her butt is. A true … little piece of heaven.
For more, she has a gel butt. I don’t know how Irontech did this, but the transition of the gel butt toward the thigh’s silicon is unnoticeable. With many manufacturers, you can say where the gel finishes and the silicon/tpe starts … but not with this one. The transition is perfect, the butt feels better than a real person and it looks RAVISHING. I mean, what could you ask for? If their full-size dolls offer the same butt configuration, this is a very STRONG design advantage from Irontech.
She has the best butt design of all the dolls I owned up to now.
As a bonus, the new boxes with molded foam will fit the butt perfectly. Therefore, I can leave her in the box without the fear of getting a flatten but. So far, after few weeks in her box, she kept her cheeks in perfect shape.
The other night, I was watching a movie with her lying on my chess while I was slowly caressing her back and butt. My mind in the movie, I lost track of time, but I do know that my hands were on her for 2 hours straight.
Vagina and anus
I do not intend to use the anus since I am always afraid of tearing, but it is tighter and textured. However, her vagina feels great and as nothing to envy to her TPE counterpart.
Also, when her legs are opened, the vagina open wide enough for easy maintenance. Some people prefer vagina that will stay close since it gives a better look, but personally, I like when the vagina stays open. It makes the cleaning and the drying WAY easier. My dolls with tight vaginas are hell to maintain, and I do now appreciate easy access, which this torso has.
Sex
As mentioned earlier, like many, I like the advantages of torsos for sex. They are so easy to move around and maintain. Contrarily to a full-size doll, your playtime will not be interrupted by 10 minutes workouts to switch your doll position.
If you can live with the missing limbs, sex with a torso is fast paced, intense, rougher, very different since you will discover new positions and easier in general. I enjoy every minute of it.
Torsos are not meant to be compared to full size doll, but they do offer advantages in specific situations. Jenny will stay around, and I am convinced that with nothing much to break on her, she will remains in mint condition for a while.
Conclusion and constructive criticism
In conclusion, I am very happy with my purchase. Irontech delivered a very high-quality product that will keep me busy for a while.
As for constructive criticism, here is what I do recommend to Irontech:
- Make the leg joints tighter by default. It is an easy fix for you, and it could be a problem for many if not done.
- Give a longer M3 bolt to mitigate the bigger neck / head screwing issue.
- By default, the body painting should be darker. It is quite hard to see these details since they are so subtle.
- On your site, put pictures of your ROS head, so people will not get confused over the look being different than the standard head.
As you seen, all these things are easy fixes. Great work Irontech, you get my two thumbs up!
What a beautiful babe!
You make me want to have a torso (even though until now I had never really asked myself the question), and particularly this model!
