Nice.. Some heads makes a sloppy pop sound, when pulling out
ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
SMdoll 'Tiffany'
TAYU 148D+ Ivy 'Pamela'
- Wheezer
- Doll Elder
- Posts: 2398
- Joined: Sat Dec 22, 2018 1:49 am
- Location: Wheezerville, USA
- Contact:
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Otherwise the auto suction function would be just whistling air, not moving the tuber.
I think that there will be an even more pronounced pop once I get in the head with the auto blow function and replace and test it with a one way air purge valve.
The suction effect can also be impacted by the design of the inserted tool.
One that has been circumcised typically has a head larger than the shaft and would make an air seal up front.
Uncircumcised or girthy shafts might seal further down the shaft or along its entire length.
The seal position and amount of air expelled impacts the final suction.
Also if they added sealing ridges along the internal channel or kept it to realistic looking.
For a real situation it makes no difference, she clamps down and the muscles flex to meet the meat.
But not so on a silicone head. It gets down to how it was designed and the target meat size.
Something to ponder on a bit.
Cheers!
... W ..
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
SMdoll 'Tiffany'
TAYU 148D+ Ivy 'Pamela'
-
- Contributing Poster
- Posts: 21
- Joined: Tue Mar 16, 2021 2:02 pm
- Contact:
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
- Wheezer
- Doll Elder
- Posts: 2398
- Joined: Sat Dec 22, 2018 1:49 am
- Location: Wheezerville, USA
- Contact:
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Then to test if the valve idea actually works in practice. (Will have to do a bit of testing )
I could not find where I placed the backflow valves, so out today to pick one up.
Luckily they are mostly the same size for aquarium airline use.
I want to to avoid the following when I go the store:
Clerk: "Can I help you ?"
Me: "I need a backflow preventer valve for an application"
Clerk: "What are you using it for ?"
Me: "To improve the suction of a sex doll blowjob head."
Clerk: "?????"
Yeah, sometimes don't over share.
Cheers!
...W...
- Wheezer
- Doll Elder
- Posts: 2398
- Joined: Sat Dec 22, 2018 1:49 am
- Location: Wheezerville, USA
- Contact:
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Someone has asked earlier for actual head images and I got sidetracked.
Below should give you some idea of what the LS60 looks like in real life, and how she can look different by altering the mouth, eyes and position.
Cheers!
...W...
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Holy hell that gal is sexy. WOWWheezer wrote: ↑Mon Mar 04, 2024 9:38 pm I am working on one repair and slapped a LS60 ROS on her for some test pictures.
Someone has asked earlier for actual head images and I got sidetracked.
Below should give you some idea of what the LS60 looks like in real life, and how she can look different by altering the mouth, eyes and position.
Cheers!
...W...
(!)(FACE)20240303_231231.jpg
(!)(FACE)20240303_232400.jpg
That LS head is something.
Jael - (YL 148) viewtopic.php?f=212&t=73333
Miriame - (SM 136) viewtopic.php?f=269&t=102115
Beth - (SM 157G) viewtopic.php?f=269&t=149637
Brooke - (Starpery 148F) viewtopic.php?t=175783
***
- Wheezer
- Doll Elder
- Posts: 2398
- Joined: Sat Dec 22, 2018 1:49 am
- Location: Wheezerville, USA
- Contact:
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Yes LS60 makes a wonderful sound when active.
Now as to the suction device, here are my opinions and observations.
These are mine and your mileage may vary.
My suction head is from the same manufacture as the Angel Kiss heads, but different brand name.
Sort of same old stuff, different package. But also applicable to the suction heads here.
First, the oral diameter is smaller than the standard head diameter. I guess that is to make sure there is a tight grip for the suction system.
Nothing that gets in the way of interaction, but something to note.
If you are someone with a wide diameter willie (or just fantasize you do) then it is an item to consider.
When in use the control box does make a bit of a noticeable whirring sounds and and such. Perhaps that is why they added the voice option to cover it up.
If you extended the air tube and moved the unit it might not be too bad, or if you have background sounds it might be masked.
It is not really bad, and might be a turn on if you have a Cylon fetish or dreams of face fucking an animatronic Disney doll.
Sound aside, it does do a nice job of helping move the tuber in and out.
When the control box and air tube is removed, then interaction is significantly different.
Each inward thrust results in the air rushing out and a little "poot" each time.
With each extraction air rushes in so there is a smooth move sensation.
Not bad, but different in kind of an interesting way.
My only suggestion would be that Jinsan (WM / Angle Kiss, etc.) include a THREADED PLUG with the kit.
That way if you are not using the control box, you can seal the port and get a better experience form the head.
And also no penis pushing poots with each thrust.
But that said it is an interesting option that seems to work as intended.
The wiener is tugged nicely and the control box can moan sexy stuff to you in various languages.
I will test it with the backflow valve as soon as I can and give an update on that modification.
Happy face humping!
Cheers!
...W...
Re: ROS Silicone Head - LS#60 - Angelkisslovedoll Official
Jael - (YL 148) viewtopic.php?f=212&t=73333
Miriame - (SM 136) viewtopic.php?f=269&t=102115
Beth - (SM 157G) viewtopic.php?f=269&t=149637
Brooke - (Starpery 148F) viewtopic.php?t=175783
***
-
- Contributing Poster
- Posts: 21
- Joined: Tue Mar 16, 2021 2:02 pm
- Contact: