Rosemary Doll Cleaning Tool
Re: Rosemary Doll Cleaning Tool
Re: Rosemary Doll Cleaning Tool
I do. On an XTdoll 163F body. It doesn’t have to completely fit inside. I open as much as I can, but frankly, as long as the LH is open, the air will dry her up. To be on the safe side, I put a finger inside to make sure it’s dry. The problem is that when I do that, she arches her back, pulls my finger deeper inside, grabs my other hand and bring it to her breast, and insists on having sex again…
Emily's old body (XT163F + XT-2 head): viewtopic.php?t=174486
Sophie (XT163F + Zelex GE115 head): viewtopic.php?t=178207
Brandi (XT 163F + Zelex GE45-5 head): viewtopic.php?p=2511578
Re: Rosemary Doll Cleaning Tool
It is quite large in diameter. Per instructions you are supposed to hold it the whole time anyways, so in theory you can press from the outside. On the fan unit the center blows in and the outer ring lets air out, so even if you cover half the circle air would still flow. Hope that makes sense.
Maybe I'm the exception but my fan stopped working after only 4 or 5 uses. I don't really miss it though.
Re: Rosemary Doll Cleaning Tool
No you're not, my fan quit the first time I used it, got so hot it melted the solder on the wires. Contacted Rosemary Doll and they promptly shipped a replacement unit which is still working great.TexDoll wrote: ↑Fri May 03, 2024 3:25 pm I also have one. The drying part fits fine in my Starpery Rong vagina but not the anus.
It is quite large in diameter. Per instructions you are supposed to hold it the whole time anyways, so in theory you can press from the outside. On the fan unit the center blows in and the outer ring lets air out, so even if you cover half the circle air would still flow. Hope that makes sense.
Maybe I'm the exception but my fan stopped working after only 4 or 5 uses. I don't really miss it though.
- Pussy69
- Doll Advisor
- Posts: 818
- Joined: Fri Mar 03, 2023 1:29 pm
- Location: North Carolina, United States
- Contact:
Re: Rosemary Doll Cleaning Tool
Mine just fried today I literally saw the steam come out of it. So with that being said we cannot use the blower longer than 1min to be safe. I'm asking for a replacement as well, thankfully mine was free with my doll. I'd be super upset if I paid in full for a wire to blow out like that. Its loud, but at least I don't have to keep getting the dry stick out.joey_sn wrote: ↑Fri May 03, 2024 7:32 pmNo you're not, my fan quit the first time I used it, got so hot it melted the solder on the wires. Contacted Rosemary Doll and they promptly shipped a replacement unit which is still working great.TexDoll wrote: ↑Fri May 03, 2024 3:25 pm I also have one. The drying part fits fine in my Starpery Rong vagina but not the anus.
It is quite large in diameter. Per instructions you are supposed to hold it the whole time anyways, so in theory you can press from the outside. On the fan unit the center blows in and the outer ring lets air out, so even if you cover half the circle air would still flow. Hope that makes sense.
Maybe I'm the exception but my fan stopped working after only 4 or 5 uses. I don't really miss it though.
Doll's Castle 150cm K-cup Review viewtopic.php?p=2415314#p2415314
6Ye 161cm J-cup Review viewtopic.php?p=2442140#p2442140
YL Doll 158cm I-cup Review viewtopic.php?p=2481808#p2481808
Get beautiful dolls with great discounts & affordable promotions here @ https://betterlovedoll.com/sales
Re: Rosemary Doll Cleaning Tool
Emily's old body (XT163F + XT-2 head): viewtopic.php?t=174486
Sophie (XT163F + Zelex GE115 head): viewtopic.php?t=178207
Brandi (XT 163F + Zelex GE45-5 head): viewtopic.php?p=2511578
Re: Rosemary Doll Cleaning Tool
Funny, I used to build aircraft models and know I have my old compressor down there somewhere. I'm also thinking about using a hair dryer with a shop vac reducer attached to better direct the warm air. I've had two of these RD cleaner/dryers fail, one on delivery. I actually got a third one that finally worked, but I gave it away...
SE Doll 167E "Erin" (coming soon)
#3 later this year
- Pussy69
- Doll Advisor
- Posts: 818
- Joined: Fri Mar 03, 2023 1:29 pm
- Location: North Carolina, United States
- Contact:
Re: Rosemary Doll Cleaning Tool
This. I can't believe I didn't think about using my hair dryer that supports blowing cold air. Having a portable blower that can also dry off the doll body is super convenient. Thats why the auto cleaner blew out b/c I was drying all of the lower body after hand washing the butt cheeks. But it short circuit when it got hot.
Doll's Castle 150cm K-cup Review viewtopic.php?p=2415314#p2415314
6Ye 161cm J-cup Review viewtopic.php?p=2442140#p2442140
YL Doll 158cm I-cup Review viewtopic.php?p=2481808#p2481808
Get beautiful dolls with great discounts & affordable promotions here @ https://betterlovedoll.com/sales
Re: Rosemary Doll Cleaning Tool
Wow, using it to dry the entire body quickly is a great idea! I almost wonder if it would warm up the skin quickly on the lower heat setting (silicone doll).Pussy69 wrote: ↑Tue May 07, 2024 7:52 amThis. I can't believe I didn't think about using my hair dryer that supports blowing cold air. Having a portable blower that can also dry off the doll body is super convenient. Thats why the auto cleaner blew out b/c I was drying all of the lower body after hand washing the butt cheeks. But it short circuit when it got hot.
SE Doll 167E "Erin" (coming soon)
#3 later this year
Re: Rosemary Doll Cleaning Tool
Haha! That’s what I was using the airbrush for too! Model planes!…PartThree wrote: ↑Tue May 07, 2024 7:47 amFunny, I used to build aircraft models and know I have my old compressor down there somewhere. I'm also thinking about using a hair dryer with a shop vac reducer attached to better direct the warm air. I've had two of these RD cleaner/dryers fail, one on delivery. I actually got a third one that finally worked, but I gave it away...
Emily's old body (XT163F + XT-2 head): viewtopic.php?t=174486
Sophie (XT163F + Zelex GE115 head): viewtopic.php?t=178207
Brandi (XT 163F + Zelex GE45-5 head): viewtopic.php?p=2511578
- Pussy69
- Doll Advisor
- Posts: 818
- Joined: Fri Mar 03, 2023 1:29 pm
- Location: North Carolina, United States
- Contact:
Re: Rosemary Doll Cleaning Tool
Oh yeah you should be fine silicone is more heat resistant than tpe. TPE owners would certainly need a cool air blower for sure. Man I really feel silly not knowing I had a hair dryer to use. Welp we make mistakes to learn from them I suppose.PartThree wrote: ↑Tue May 07, 2024 8:11 amWow, using it to dry the entire body quickly is a great idea! I almost wonder if it would warm up the skin quickly on the lower heat setting (silicone doll).Pussy69 wrote: ↑Tue May 07, 2024 7:52 amThis. I can't believe I didn't think about using my hair dryer that supports blowing cold air. Having a portable blower that can also dry off the doll body is super convenient. Thats why the auto cleaner blew out b/c I was drying all of the lower body after hand washing the butt cheeks. But it short circuit when it got hot.
Update: So later today Rosemary responded with a tracking of the replacement auto cleaner. This time I'm only using that blower within 20sec for the orifices. If I ever use both orifices during the same sex session then I'll use my hair dryer for everything lol. We cannot let this thing heat up that's just the bottom line of this product.
Doll's Castle 150cm K-cup Review viewtopic.php?p=2415314#p2415314
6Ye 161cm J-cup Review viewtopic.php?p=2442140#p2442140
YL Doll 158cm I-cup Review viewtopic.php?p=2481808#p2481808
Get beautiful dolls with great discounts & affordable promotions here @ https://betterlovedoll.com/sales