welcome to custom doll

bdizzle18 · Post by **bdizzle18** » Sat Feb 12, 2022 11:19 pm

dolls-castle wrote:
bdizzle18 wrote:I'm looking for something that looks like this:

1. very tall
2. IMPOSSIBLY slender woman
3. with IMPOSSIBLY round breasts (that look like she had plastic surgery --- not the kind that look natural) - side boob required to keep them perky. (Approximately 2500cc's of volume in each breast (smaller than her head) (one could suggest a small breast - this as a large breast and a giant breast option if someone wants a super sofia type thing with 6500cc's of volume) - The top of the torso will need to be slightly wider to accomodate the breasts; but it will also be thinner.
4. 'top hourglass' body (huge breasts tiny hips)
5. slightly longer torso with visible ribs; (the huge breasts must not sag below the ribs)
6. wasp waist with recessed stomach or barely noticable abs as if she is fit and just took off a corset; not sickly
7. Very thin hips - with ass cheeks that stick out impossibly far on the rear; not on the side.
8. Thighs longer than normal; very thin; but still shapely and toned.
9. Calfs that are shapely and toned

I was working on a 3d model but mangled it... I'm not an artist... I'd be better off getting a complete file and modifying it
Hello
Thank you for the info above, we think we understand what a doll you wanted, actually we can start the mud sample from there, but here some detail we would like furtherly:
1. we want estimated Bust/Wait/Hip
2. estimated weight and height of the body
3. can you share your 3D art to us? to see if we can correct it.
Thanks again
Regards
Lucky

*(I'm not ready to purchase yet as I'm not sure what my favorite 'perfect breast size' is quite yet... I'm leaning towards 2000cc's to 2500cc's but until I buy or meet someone with a doll that has those specs I'm not sure. I do know that 900cc's is way too small.) The image however and concept that each breast should be slightly smaller than the head is close to my preference.

1. Estimated in CM B/W/H - 99-38-71 in Inches= 39-15-28 (28M cup bra)
a. The hips should be 12 inches wide from left to right; the additional 16 inches would be the rear cheeks sticking out abnormally far
2. Estimated weight and height; Thats tough as I haven't determined 'my perfect height' but definately taller... 150-175cm and Weight depends on the height so I can't guess that.. but the super thin legs, hips and wasp waist should help make it extra light.
3. The 110mb blender file is located here: https://drive.google.com/file/d/1nCeXiz ... sp=sharing

Warning - the Left breast is incomplete; slightly mis shapen.. the Right breast is almost perfect; the sphere tool was helpful and I havent had time to try to make them match... Also haven't gotten the nipples right and it needs more vertices.... the body mesh is close to what I want but I'm still tooling around in my spare time.

This file is photoshopped from various dolls and women that I was using as a guide to create the 3d file above.

2.5mb version:
https://drive.google.com/file/d/1f4v7su ... sp=sharing

10mb version:
https://drive.google.com/file/d/1RV-88J ... sp=sharing

Post by **dolls-castle** » Tue Feb 15, 2022 12:56 am

bdizzle18 wrote:
dolls-castle wrote:
bdizzle18 wrote:I'm looking for something that looks like this:

1. very tall
2. IMPOSSIBLY slender woman
3. with IMPOSSIBLY round breasts (that look like she had plastic surgery --- not the kind that look natural) - side boob required to keep them perky. (Approximately 2500cc's of volume in each breast (smaller than her head) (one could suggest a small breast - this as a large breast and a giant breast option if someone wants a super sofia type thing with 6500cc's of volume) - The top of the torso will need to be slightly wider to accomodate the breasts; but it will also be thinner.
4. 'top hourglass' body (huge breasts tiny hips)
5. slightly longer torso with visible ribs; (the huge breasts must not sag below the ribs)
6. wasp waist with recessed stomach or barely noticable abs as if she is fit and just took off a corset; not sickly
7. Very thin hips - with ass cheeks that stick out impossibly far on the rear; not on the side.
8. Thighs longer than normal; very thin; but still shapely and toned.
9. Calfs that are shapely and toned

I was working on a 3d model but mangled it... I'm not an artist... I'd be better off getting a complete file and modifying it
Hello
Thank you for the info above, we think we understand what a doll you wanted, actually we can start the mud sample from there, but here some detail we would like furtherly:
1. we want estimated Bust/Wait/Hip
2. estimated weight and height of the body
3. can you share your 3D art to us? to see if we can correct it.
Thanks again
Regards
Lucky
*(I'm not ready to purchase yet as I'm not sure what my favorite 'perfect breast size' is quite yet... I'm leaning towards 2000cc's to 2500cc's but until I buy or meet someone with a doll that has those specs I'm not sure. I do know that 900cc's is way too small.) The image however and concept that each breast should be slightly smaller than the head is close to my preference.

1. Estimated in CM B/W/H - 99-38-71 in Inches= 39-15-28 (28M cup bra)
a. The hips should be 12 inches wide from left to right; the additional 16 inches would be the rear cheeks sticking out abnormally far
2. Estimated weight and height; Thats tough as I haven't determined 'my perfect height' but definately taller... 150-175cm and Weight depends on the height so I can't guess that.. but the super thin legs, hips and wasp waist should help make it extra light.
3. The 110mb blender file is located here: https://drive.google.com/file/d/1nCeXiz ... sp=sharing

Warning - the Left breast is incomplete; slightly mis shapen.. the Right breast is almost perfect; the sphere tool was helpful and I havent had time to try to make them match... Also haven't gotten the nipples right and it needs more vertices.... the body mesh is close to what I want but I'm still tooling around in my spare time.

This file is photoshopped from various dolls and women that I was using as a guide to create the 3d file above.

2.5mb version:
https://drive.google.com/file/d/1f4v7su ... sp=sharing

10mb version:
https://drive.google.com/file/d/1RV-88J ... sp=sharing

Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky

Post by **dolls-castle** » Tue Feb 15, 2022 1:06 am

dolls-castle wrote:Custom example,
This is authortied by our cilent, a nice customer of us,
Mud sample done, a little change based on the model.

Moudls done and initial aerolas shaped

Peonyou101 · Post by **Peonyou101** » Tue Feb 15, 2022 6:26 am

dolls-castle wrote:
bdizzle18 wrote:
dolls-castle wrote:-break down price
-payment plan
-good engineering
-privacy protected

Does your company have anything posted in public on your process and estimated pricing for a custom body mold creation? I did not see anything on your website.
Hello
sorry we didnt post something ablut the estimated pricing here, it will be round $1800-$2200 to custom a body, settled price is up to the height and details, we will post that with a big fat doll here not at our website, we wanted down price for TDP member only, thank you very much for your note.
Regards
Lucky

Lucky, so it would cost $1800-$2200 just for you guys to make a custom mold? and then afterwards I'm guessing we would have to pay for the doll as well? I like the body shape of the WM 170cm M-cup doll but want it alot taller. Can you give me an estimate of how much the doll might cost for a doll like that to be custom made so it can be...

6foot 2inches - 6foot 5inches tall (190cm-195cm)
M-cup boobs 40.2" (102cm)
Waist 21" (54cm)
Hips 38" (97cm)
Weight: about 130lbs

So ya I pretty much want the shape of the doll to be like the WM 170cm M-cup but want it to be 6foot 2inches - 6foot 5inches tall ^^

Post by **dolls-castle** » Tue Feb 15, 2022 8:10 pm

Peonyou101 wrote:
dolls-castle wrote:
bdizzle18 wrote:
dolls-castle wrote:-break down price
-payment plan
-good engineering
-privacy protected

Does your company have anything posted in public on your process and estimated pricing for a custom body mold creation? I did not see anything on your website.
Hello
sorry we didnt post something ablut the estimated pricing here, it will be round $1800-$2200 to custom a body, settled price is up to the height and details, we will post that with a big fat doll here not at our website, we wanted down price for TDP member only, thank you very much for your note.
Regards
Lucky
Lucky, so it would cost $1800-$2200 just for you guys to make a custom mold? and then afterwards I'm guessing we would have to pay for the doll as well? I like the body shape of the WM 170cm M-cup doll but want it alot taller. Can you give me an estimate of how much the doll might cost for a doll like that to be custom made so it can be...

6foot 2inches - 6foot 5inches tall (190cm-195cm)
M-cup boobs 40.2" (102cm)
Waist 21" (54cm)
Hips 38" (97cm)
Weight: about 130lbs

So ya I pretty much want the shape of the doll to be like the WM 170cm M-cup but want it to be 6foot 2inches - 6foot 5inches tall ^^

Hello Dear
Thank you for your inquiry, yup 190 - 195cm is alot taller, it should be 2700$ for custom this order, 2700$ from a mud sample to moulds to a final doll, but the shipping cost is on your side, because we dont know how much exactly cost shipping given that the shipping is changing every day, are you interested? thank you so much
Regards
Lucky

bdizzle18 · Post by **bdizzle18** » Sun Feb 20, 2022 3:15 am

dolls-castle wrote:
bdizzle18 wrote:
dolls-castle wrote:
bdizzle18 wrote:I'm looking for something that looks like this:

1. very tall
2. IMPOSSIBLY slender woman

Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky

A ballpark price would be sufficient.

1. Height (unsure; price and weight will help decide) 170-175cm maybe
2. Weight (as light as possible based off specs; ideally 60-80 lbs)
3. Estimated dimensions in CM B/W/H - 99-38-71 in Inches= 39-15-28 (28M cup bra)
4. Breasts - Hollow or cotton filled. I believe 2000 to 3000 cc breast volume will be close to what; each breast should be able to stand on their own; perfect spheres that do not sag or cover the ribs. each slightly smaller than the head.
5. a waist, hips and legs longer and thinner than anything ever created!
a. The hips should be 12 inches wide from left to right; the additional 16 inches would be the rear cheeks sticking out abnormally far
6. pale TPE skin

7. The 110mb blender file is located here: https://drive.google.com/file/d/1nCeXiz ... sp=sharing

Warning - the Left breast is incomplete; slightly misshapen.. the Right breast is almost perfect and I'm not a fan of the nipples - I prefer them to be small with small areolas...; the sphere tool was helpful and I haven't had time to try to make them match... Also I haven't gotten the nipples right and it needs more vertices.... the body mesh is close to what I want but I'm still tooling around in my spare time.

This file is photoshopped from various dolls and women that I was using as a guide to create the 3d file above.

2.5mb version:
https://drive.google.com/file/d/1f4v7su ... sp=sharing

10mb version:
https://drive.google.com/file/d/1RV-88J ... sp=sharing

I am keeping a spreadsheet to track my doll research; it may be useful as the dolls are sorted top down as the ones I like the most.
https://docs.google.com/spreadsheets/d/ ... sp=sharing

Shipping to zip code in pittsburgh 15066 (not my actual zipcode but close)

Thx.
B

Aglooka · Post by **Aglooka** » Sun Feb 20, 2022 6:56 am

dolls-castle wrote: Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky

Dear Lucky

It had been months since many forum users had requested you a fat doll with huge tits

Finally the J cup 150cm is released and all on her is good, the belly, the ass, but her tits, in the eyes of huge tits lovers, are very small for the body. We did post multiple photos examples for huge breast on many of your threads. A good example is this one

viewtopic.php?f=262&t=143184

If you were to do new and bigger tits on the J Cup, you can count that few of us will purchase her

: 1642841245371982 (1).jpg (303.05 KiB) Viewed 1108 times

: TITS5_1637166489747 (1).jpg (1.24 MiB) Viewed 1107 times

: TITS1_1637166329018 (1).jpg (1.27 MiB) Viewed 1107 times

: TITS1_1637166352438 (1).jpg (1.28 MiB) Viewed 1107 times

: TITS2_1637166370124 (1).jpg (1.22 MiB) Viewed 1107 times

: TITS3_1637166404183 (1).jpg (1.24 MiB) Viewed 1107 times

: TITS4_1637166457348 (1).jpg (1.21 MiB) Viewed 1107 times

: TITS4_1637166438626 (1).jpg (1.23 MiB) Viewed 1107 times

Cant they be re-shaped from the already existing mold?

AlbertWesker01 · Post by **AlbertWesker01** » Mon Feb 21, 2022 12:58 am

Aglooka wrote:
dolls-castle wrote: Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky
Dear Lucky

It had been months since many forum users had requested you a fat doll with huge tits

Finally the J cup 150cm is released and all on her is good, the belly, the ass, but her tits, in the eyes of huge tits lovers, are very small for the body. We did post multiple photos examples for huge breast on many of your threads. A good example is this one

viewtopic.php?f=262&t=143184

If you were to do new and bigger tits on the J Cup, you can count that few of us will purchase her

1642841245371982 (1).jpg

TITS5_1637166489747 (1).jpg
TITS1_1637166329018 (1).jpg
TITS1_1637166352438 (1).jpg
TITS2_1637166370124 (1).jpg
TITS3_1637166404183 (1).jpg
TITS4_1637166457348 (1).jpg

TITS4_1637166438626 (1).jpg
Cant they be re-shaped from the already existing mold?

Honestly i thought the breasts are fine but the belly isnt as round and outer as a bbw would be
if there was gel breasts option would that increase their size?

Aglooka · Post by **Aglooka** » Mon Feb 21, 2022 6:47 am

AlbertWesker01 wrote:
Aglooka wrote:
dolls-castle wrote: Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky
Dear Lucky

It had been months since many forum users had requested you a fat doll with huge tits

Finally the J cup 150cm is released and all on her is good, the belly, the ass, but her tits, in the eyes of huge tits lovers, are very small for the body. We did post multiple photos examples for huge breast on many of your threads. A good example is this one

viewtopic.php?f=262&t=143184

If you were to do new and bigger tits on the J Cup, you can count that few of us will purchase her

1642841245371982 (1).jpg

TITS5_1637166489747 (1).jpg
TITS1_1637166329018 (1).jpg
TITS1_1637166352438 (1).jpg
TITS2_1637166370124 (1).jpg
TITS3_1637166404183 (1).jpg
TITS4_1637166457348 (1).jpg

TITS4_1637166438626 (1).jpg
Cant they be re-shaped from the already existing mold?
Honestly i thought the breasts are fine but the belly isnt as round and outer as a bbw would be
if there was gel breasts option would that increase their size?

I love your love for big bellies.

Breast are fine and proportioned , but not what huge tits lovers would expect, that doll that put us nervous when see it for first time, and can only rest when purchased

A jelly belly too, would be TOP

2min2sunset · Post by **2min2sunset** » Mon Feb 21, 2022 7:36 am

bdizzle18 wrote:
I am keeping a spreadsheet to track my doll research; it may be useful as the dolls are sorted top down as the ones I like the most.
https://docs.google.com/spreadsheets/d/ ... sp=sharing

OMG!!! this spreadsheet is so amazing

Thank you so much for doing it
It is very helpfull

Post by **dolls-castle** » Thu Feb 24, 2022 2:46 am

vagina

Post by **dolls-castle** » Wed Mar 02, 2022 9:18 pm

Aglooka wrote:
dolls-castle wrote: Hello Dear
We are modeying the files, and kindly waitting please, thank you very much
Regards
Lucky
Dear Lucky

It had been months since many forum users had requested you a fat doll with huge tits

Finally the J cup 150cm is released and all on her is good, the belly, the ass, but her tits, in the eyes of huge tits lovers, are very small for the body. We did post multiple photos examples for huge breast on many of your threads. A good example is this one

viewtopic.php?f=262&t=143184

If you were to do new and bigger tits on the J Cup, you can count that few of us will purchase her

The attachment 1642841245371982 (1).jpg is no longer available

The attachment TITS5_1637166489747 (1).jpg is no longer available
The attachment TITS1_1637166329018 (1).jpg is no longer available
The attachment TITS1_1637166352438 (1).jpg is no longer available
The attachment TITS2_1637166370124 (1).jpg is no longer available
The attachment TITS3_1637166404183 (1).jpg is no longer available
The attachment TITS4_1637166457348 (1).jpg is no longer available

The attachment TITS4_1637166438626 (1).jpg is no longer available
Cant they be re-shaped from the already existing mold?

cain587 · Post by **cain587** » Thu Mar 03, 2022 5:08 am

This is amazing with the custom dolls you have made. So many people have offered lovely doll shapes for you guys to make, I just hope they don't overwhelm you with too many request.

Post by **dolls-castle** » Thu Mar 03, 2022 9:03 pm

cain587 wrote:This is amazing with the custom dolls you have made. So many people have offered lovely doll shapes for you guys to make, I just hope they don't overwhelm you with too many request.