Inflating breasts with a hypodermic needle

danebramage · Post by **danebramage** » Mon Sep 26, 2022 1:16 pm

This is my augmented sm150l, it was done with poly fill, ive done air and poly fill, both have benefits and drawbacks.

LatexLadyLover · Post by **LatexLadyLover** » Tue Sep 27, 2022 7:50 pm

Great question. I just received a brand new WM 172D with gel and one breast is deflated looking. Can this air pumping technique work on gel breast? Where do I go in? Thanks

DaX2037 · Post by **DaX2037** » Tue Sep 27, 2022 8:12 pm

LatexLadyLover wrote: ↑Tue Sep 27, 2022 7:50 pm Great question. I just received a brand new WM 172D with gel and one breast is deflated looking. Can this air pumping technique work on gel breast? Where do I go in? Thanks

Absolutely yes. See my earlier post from Sept 19. I went with the 21 gauge hypodermic needle through the nipple method.

CF · Post by CF » Tue Sep 27, 2022 8:58 pm

danebramage wrote: ↑Mon Sep 26, 2022 1:16 pm This is my augmented sm150l, it was done with poly fill, ive done air and poly fill, both have benefits and drawbacks.

Terrific work! She looks amazing!

Aglooka · Post by **Aglooka** » Wed Sep 28, 2022 3:23 am

DaX2037 wrote: ↑Tue Sep 27, 2022 8:12 pm
LatexLadyLover wrote: ↑Tue Sep 27, 2022 7:50 pm Great question. I just received a brand new WM 172D with gel and one breast is deflated looking. Can this air pumping technique work on gel breast? Where do I go in? Thanks
Absolutely yes. See my earlier post from Sept 19. I went with the 21 gauge hypodermic needle through the nipple method.

THIS !

DaX2037 · Post by **DaX2037** » Wed Oct 05, 2022 7:33 pm

Engineered inflation solution!!!!

Gawdammit!!! why did I have to look at this thread!!! lol

1 Valve to 1/4in NPT https://www.amazon.com/dp/B07G37D25L?ps ... ct_details
1 female to female 1/4in NPT coupler https://www.amazon.com/dp/B074884TPL?p ... t_details
1 (or 2) leur lock to NPT fitting (1/8in or 1/4in)(get appropriate coupling) https://www.amazon.com/dp/B00L0VEAZE?p ... ct_details
Air tubing kit (has more than enough to make a system to inflate 1 to 3 boobs at a time) https://www.amazon.com/dp/B08BLC8PZ2?p ... t_details
your choice of pump. Any standard ball or bike pump will work. If you are daring, you can use a tire inflator. I used this https://www.amazon.com/dp/B0B71MN9RH?p ... ct_details
Don't forget your leur lock hypodermic needles

Alternatively, if you don't have fun doing this kind of stuff, the valve and leur lock npt fitting can be coupled and go directly to your pump

This setup is heavy so a supporting method may be needed.

: Version 1; IMG_20221005_164336309.jpg (2.96 MiB) Viewed 1032 times

: Version 2; IMG_20221005_173721383.jpg (2.75 MiB) Viewed 1032 times

: Version 3 Applied; IMG_20221005_190026193.jpg (3.3 MiB) Viewed 1032 times

: Version 3; IMG_20221005_185626478.jpg (3.1 MiB) Viewed 1032 times

Testing on a fully deflated severed hollow booby

: VID_20221005_173102417.gif (61.25 MiB) Viewed 1032 times

Have fun!!

CF · Post by CF » Thu Oct 06, 2022 12:12 am

danebramage wrote: ↑Mon Sep 26, 2022 1:16 pm This is my augmented sm150l, it was done with poly fill, ive done air and poly fill, both have benefits and drawbacks.

Holy Toledo, her rack got me hard!

You did amazing work on her! What are the benefits of poly fill over air?

seagull · Post by **seagull** » Thu Oct 06, 2022 1:03 am

Very obvious if it leaks

danebramage · Post by **danebramage** » Thu Oct 06, 2022 3:01 am

The polyfill wont leak but it will make the boobs feel more like a solid boob. Air is easy, lightweight, but you have to properly seal the injection site.

Apec23 · Post by **Apec23** » Thu Oct 06, 2022 11:32 am

DaX2037 wrote: ↑Wed Oct 05, 2022 7:33 pm Engineered inflation solution!!!!

Gawdammit!!! why did I have to look at this thread!!! lol

1 Valve to 1/4in NPT https://www.amazon.com/dp/B07G37D25L?ps ... ct_details
1 female to female 1/4in NPT coupler https://www.amazon.com/dp/B074884TPL?p ... t_details
1 (or 2) leur lock to NPT fitting (1/8in or 1/4in)(get appropriate coupling) https://www.amazon.com/dp/B00L0VEAZE?p ... ct_details
Air tubing kit (has more than enough to make a system to inflate 1 to 3 boobs at a time) https://www.amazon.com/dp/B08BLC8PZ2?p ... t_details
your choice of pump. Any standard ball or bike pump will work. If you are daring, you can use a tire inflator. I used this https://www.amazon.com/dp/B0B71MN9RH?p ... ct_details
Don't forget your leur lock hypodermic needles

Alternatively, if you don't have fun doing this kind of stuff, the valve and leur lock npt fitting can be coupled and go directly to your pump

This setup is heavy so a supporting method may be needed.

IMG_20221005_164336309.jpg
IMG_20221005_173721383.jpg
IMG_20221005_190026193.jpg
IMG_20221005_185626478.jpg

Testing on a fully deflated severed hollow booby
VID_20221005_173102417.gif

Have fun!!

I’m probably going to use this write up to modify the s cups I just received from Roayner. The gel filling isn’t as soft as I thought they would be & I might try to see if water would be a better jiggle factor.

I was thinking the other day maybe we should start a dedication inflate/deflate thread wiki for how to do this,

7Z5GZ · Post by **7Z5GZ** » Fri Oct 14, 2022 5:55 pm

Hi, I used a small syringe to reinflate my doll's gel breasts after they began collapsing slightly. It worked great but they are beginning to sag a bit again. Instead of injecting air this time I'd like to try adding gel, since air has something of a "volleyball" feel and the gel might not leak again so easily. Any ideas on what kind of gel is used in the original manufacture, or what would be best for me to try?

Thanks!

DaX2037 · Post by **DaX2037** » Sat Oct 29, 2022 1:52 pm

My final notes on air inflation with a hypodermic needle.

This was a fun experience for me and now, I shall share what I think are the most important things to know.

1. Tools - The simplest and most effective set up is a valve to hypodermic needled. The picture below has the 4 main parts plus proper adapters to connect to a basic household pump (like a basketball pump). These are amazon links for the vital pieces.

: The Tool; IMG_20221029_131956852.jpg (4.83 MiB) Viewed 832 times

2. What is being inflated
2-1. Hollow breasts are simple because you are just adding more air. Easily inflated or deflated as desired.
2-2. Gel breast have some things to consider. They are essentially hollow breasts with a gel filling so you are adding a third element by doing the inflation. They easily accept the inflation, but you may feel the gel separating from the main wall while inflating.

3. Considerations to be made are simply to go slow and try to inflate both breast evenly and one step at a time. Depending on how big you decide to go, you may notice some asymmetries forming. If you notice this and want to go back, using a syringe will allow you to deflate until the undesired asymmetry disappears. Gel breasts are a toss up on inflation. You may end up with one perfectly formed beachball and one that looks like a long chin. If you experience this with gel breast, while you can deflate, you will have to find the air pocket which may be difficult depending on the brand. I DO NOT recommend more than minimal inflation of ultra soft TPE (not that a lot of people have dolls with that option) with gel breasts, just enough to enhance the roundness (maybe 200 to 300 cc's MAX).

This is my first WM150 with gel breasts. As you can see, it generously accepted the inflation on both breasts and I may do more.

: IMG_20221029_131546443_HDR.jpg (3.33 MiB) Viewed 832 times

: IMG_20221029_131558673.jpg (3 MiB) Viewed 832 times

Aglooka · Post by **Aglooka** » Sun Oct 30, 2022 7:37 am

Awesome Dax.

That wm150 have almost the same tits of an yl150 , but with gel ! and still the ass of the wm150 .What a combo ! , mad .

Apec23 · Post by **Apec23** » Mon Oct 31, 2022 7:53 pm

This thread should be pinned, or we should make a dedicated thread. How to/success/failure/faq on this discussion. Wowza on that wm150

fangore23 · Post by **fangore23** » Fri Nov 18, 2022 3:04 pm

I’m probably going to use this write up to modify the s cups I just received from Roayner. The gel filling isn’t as soft as I thought they would be & I might try to see if water would be a better jiggle factor.

I was thinking the other day maybe we should start a dedication inflate/deflate thread wiki for how to do this,
[/quote]

is it possible to fill hollow breast with gel ?