Lack of average body
- FullHouse
- Senior Member
- Posts: 484
- Joined: Fri Jul 07, 2017 4:48 am
- Location: South Bavaria
- Contact:
Re: Lack of average body
- Procrasturbate
- Doll Advisor
- Posts: 654
- Joined: Mon Jun 26, 2017 12:52 am
- Contact:
Re: Lack of average body
This old placement of holes is for ease on entry, no matter your size. however if you wanted to do anal in missionary youd have to ball the doll up in an unflattering arch and if you want to do vaginal penetration during doggy, depending on your length. would make it almost impossible. Even if you reached, if your junk isnt in the same angle as the tunnel, youll just get frustrated.
Its almost how blowup dolls with inserts and double holes are designed. pussy where pubic hair goes and anus half way up the butt crack.
- sam treadwell
- Doll Advisor
- Posts: 811
- Joined: Fri Jun 24, 2011 1:59 pm
- Location: Anaheim
- Contact:
Re: Lack of average body
That’s my understanding as well Quater. If you like missionary, as I do, this isn’t really a bad thing. But if you’re a doggie aficionado, it makes it tough. My doll is anatomically correct, and missionary can be challenging as a result.Quater wrote:From what I have gleaned from other threads here on TDF, it seems some MFRs do place the vagina more forward than anatomically correct to make missionary easier (somewhat at the expense of doggy).
- RC3291
- Active Member
- Posts: 120
- Joined: Sat Jul 01, 2017 12:39 pm
- Location: Third stone from the sun
- Contact:
Re: Lack of average body
It not only varies with manufacturers but also models from the same manufacturerFullHouse wrote:What I read was that due to many people claiming about the wrong position it has been moved to be more anatomically correct. Can anyone bring clearness on this subject?
- Mark Spencer
- Senior Member
- Posts: 441
- Joined: Tue Jun 20, 2017 12:54 am
- Location: Vermont
- Contact:
Re: Lack of average body
If they were that close together on a TPE doll, how long before they becaume a 'uni-hole' ?Procrasturbate wrote:this leaves a 4" taint, when it is supposed to be about .5".
I can imagine that area being destroyed upon first entry.
They could use a much firmer material, but that's the opposite direction from
what customers are asking for (softer! softer!)
I'm not sure moving them to a more realistic location would easily work without
a redesign of the hip portion of the skeleton. Even that would involve making
the hips loose, which might eliminate the ability to stand.
There's no shortage of ideas, but making them work practically while keeping
the affordability and aesthetics can be a problem.
I kept locking the keys in the plane. They caught
me on an 80 foot stepladder with a coat hanger."
Steven Wright
- rubherkitty
- Doll Oracle
- Posts: 8966
- Joined: Sat Aug 25, 2012 5:24 pm
- Location: Interstate 44 with 10 long-haired Friends a' Jesus In a chartreuse micra-bus
- Contact:
Re: Lack of average body
Sorry, I'll take the fantasy bodies in my area.
Re: Lack of average body
6ye have gone some way to fixing thissam treadwell wrote:I think that’s pretty much what it is Barbydoll. I’m not trying to push another manufacturers product here, but since I’m largely unfamiliar with WM products, I’m going to use Z-onedoll as an example.Barbydoll wrote:I wonder why they use these tiny hands and feet and the thin arms even for 170 cm dolls.
There's no woman I've ever seen who looks like this.
Maybe a twelve year old EU or USA girl has such hands and feet.
I think the main problem is that with the cheap TPE production method a realistic sized doll (average size of a 25 year girl here is above 170 cm) would have a realistic weight of 65-70 kg which is too much for most customers.
Take a look at the 160cm body in the link below that weighs 34kg (75lbs). Then take a look at the 162cm which is nearly the same height, but weighs 39kg (86lbs). Most here would probably agree that the 162cm has more realistic proportions. But look at the weight difference. And one member that got the 162cm reported an actual weight of much higher than the listed weight.
Hopefully someday, there will be breakthroughs in weight reduction that will become the industry standard, allowing these dolls to become much more pleasurable companions.
But in the meantime, keep your T supplements and your dumbbells close at hand
http://www.z-onedoll.com/process/FrontC ... Id=24.html
We've got every thing you need , including Sex Android's
Come on Boys , Just take a look , Every things Unique
If You want Real Sexy Dolls , Just cum and take a peak
In The Future ,In The Future
So Welcome !!!!!!!!!
WELCOME !!!!!! To The FUTURE !!!!!!!!!!
My Girls and their stories https://www.dollforum.com/forum/viewtop ... 13&t=87890
My first doll Latasha is on a secret mission to find the perfect body !!!!!
Kireina's song https://youtu.be/sxSw20Gmubs
Some one said , Guys have girlfriends , because they have not found their perfect doll
Well I have Her name Is Kireina AND she's a 6ye
I am me , and just me , and always will be me , and I don't deserve to be put in a box nobody does .bob7892
Re: Lack of average body
Knightshift wrote:Procrasturbate wrote:im just glad this company know where the hell a pussy and asshole go .. im tired at looking at dolls like.. have anyone in this company actually seen a woman? *cough* 6ye *cough*
But seriously folks... this is so true! Is it that difficult to mold the "girly bits" in an accurate location? The silicone dolls seem to have this solved for the most part, while the TPE dolls have some of the most realistic and gorgeous faces, lovely hands and feet, but the "taint" is the size of Nebraska?! COME ON!
Ain't nobody got time for Nebraska sized taints!
- DocMoriarty
- Doll Mentor
- Posts: 1134
- Joined: Sat Jul 08, 2017 11:15 am
- Location: Germany, Munich in a heavy doll infested apartment
- Contact:
Re: Lack of average body
Here an example from the YL-Site of the YL 135cm: http://www.yldoll.com/shop/index.php?ro ... duct_id=55
Specials: May 2024 Cat FAB Challenge “Plushies in Motion”, Oktoberfest 2023 Special Report in Petra's Thread
Left to Right: Ronda - Florina Valentina - 2018-11-12 * Petra - Happy Doll 165D - 2023-08-14 * Michelle - Happy Doll 165E/Irontech S27 - 2024-04-23 * Roxi - Teddy Babe Deluxe Diana - 2020-07-20 * Anette - Teddy Babe Deluxe Lisa - 2018-09-04
Re: Lack of average body
FullHouse (the OP) created a poll for her - check it out:FullHouse wrote: [...]
Personally I'm thinking about something like her:
These measurements would be 152cm incl. head / 83-59-84
She's got a nice butt, a handful titties, a normal sized waist and adult looking thighs. Not too firm, rather slightly chubby maybe. The WM 153 a-cup might be a good basis here
Subject: IdeaTpeDoll: Yu Tsujii
-
- Active Member
- Posts: 147
- Joined: Mon Mar 02, 2015 1:35 am
- Contact:
Re: Lack of average body
2 it would be nice to shop for women's clothes instead of little girls. I have a WM 140A and she is only 12 inches from shoulder to shoulder. She is so petite I see her as more of a child and have left her laying on the bed for months at a time and just use the insert.
You guys are on the right track we need to see a more life like realistic model from WM.
I'd like to see somewhere between 5'3" and 5'6" a bust between 30 and 34 inches cup B,C, or D, a waist 22 to 24 and hips 30 to 34. Top and bottom need to be proportional. Shoulder to shoulder she should not be less than 2 inches smaller than an average woman of the same size.
The kind of woman you'd see at the beach in a bikini and have trouble not being obvious when you look at her. You can tell see exercises, or maybe she's a professional dancer, or figure skater. A clothing size 2 would be readily available for most things you'd like her to wear and she would still be a manageable weight.
I like the WM 153A, 156C and the 163C and may have to settle for one of these if I can get confirmed measurements so I have an idea of clothing size.
The first doll manufacturer that has a properly fitted clothing line which minimizes staining for each of it's dolls will have to increase it's production by at least a third and will have to double it's accounting dept. to keep track of all the money coming in.
You would think by now that some clothing manufacturer would have teamed up with a doll manufacturer and provide a clothing line, I seem to remember Barbie had more than one outfit and so did GI Joe.
- SynthetikReality95
- Ex-Member
- Posts: 2673
- Joined: Mon Apr 18, 2016 4:15 pm
Re: Lack of average body
- hangman2020
- Senior Member
- Posts: 469
- Joined: Tue Jul 25, 2017 3:35 pm
- Location: Suffolk, UK
- Contact:
Re: Lack of average body
The 'average' US woman is a size 16
And you are seeing bigger dolls like (158CM 5FT2 B-CUP SEX DOLL)
But it's not to "real" woman size add 4" more to the waist.
the next Gen dolls need to have new ideas like new more realistic skeleton the makers could look at the smaller dolls and take ideas from them
I feel the way to go is 3d printed skeletons and heads and all ball joints need to be solid this is why i feel metal 3d printers will help.
Re: Lack of average body
1. Weight is an issue. 2. The balance of the weight can be an issue. 3. The fluidity of real breasts, especially large naturals is not there. Real breasts flow and jiggle, their shape depends on what direction gravity is pulling or not. 4. Articulation of spine and hips could be improved, this would help the vagina and ahole positions becoming realistic. Real spines can bend and sway in more ways. 5. Foam cores are still too heavy. 6. Legs can be thicker with stronger feet and joints, that would help ability to stand and pose standing. 7. Robotics is coming. Some things from robotics could help even when there is no good AI or brain yet. Joints could have a power assist, or remotely controlled position - that still could be posable by hand and/or locking / unlocking. 8. Skeletons could be made far better, with better / lighter materials just as strong as steel or strong enough to serve the purpose. Full of ideas, and I might have to make my own doll to experiment with them.
love just is - it can manifest from a completely surprising source. Imagination is key.
Love is in every bit of reality - be ready for when our creations can express and flow that love - myself