MEDIC 101- Abrasions
- Booty Call Dolls
- VENDOR
- Posts: 24034
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
MEDIC 101- Abrasions
If you use any heating methods, do so at your own risk.
TDF and we at BCD are not responsible if you botch up the repair.
******Please remember SAFETY FIRST*********
For small abrasions, indigo20 smoother from the repair kit will do just fine.
Pointer- use a bit baby oil to stops a bit the situation that the abrasion is getting stronger.
Although "Smoother" from the repair kit is able to deal with abrasions, it works slow so if you have a large abrasion, you might want to consider a rework station with heat gun.
Please watch these 2 videos:
https://www.youtube.com/watch?v=QHC0Y14eMBY
https://www.youtube.com/watch?v=vYk6NojMAqI
The area (the breasts) is prepared with mineral oil.
The used temperature is a bit too high (above 220°Celsius), you see the smoke and that the TPE becomes liquid very fast.
A temperature around 190-200°Celsius and more distance of the heat gun to the TPE surface is better, the smoothing effect is slowier but more controlled and without that heavy smoke.
There will always be a bit smoke.
********That smoke is unhealthy!!!!**********
It is necessary to have a permanent ventilation with fresh air or smoke extractor or a mask (half-mask) with filter against organic chemicals.
The second video shows at the end that the worker is using a fine fabric sheet to .
brings back the TPE surface structure else it would be smooth and shiny.
You can use a sand paper instead and press it on the hot TPE
Rework stations only with heat gun are available at ebay for about $30 and rework stations with heat gun and temperature controled soldering iron are about $50.
- Mishka1965
- Doll Elder
- Posts: 3389
- Joined: Wed Jan 21, 2015 11:37 pm
- Location: USA California
- Contact:
Re: MEDIC 101- Abrasions
What model heat gun is that?
Mishka
2018-2021 Photographing for JIUSHENG-DOLL,6YE,SinoDoll
2022-2023 Photographer/Reviewer for Zelex, TAYU, MRD and IronTech
Twitter Page: https://twitter.com/Mishka_1965
Instagram Page:https://www.instagram.com/_mishka1965_/
- Anung Un Rama
- Doll Visionary
- Posts: 14846
- Joined: Fri Oct 31, 2014 2:27 am
- Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
- Contact:
Re: MEDIC 101- Abrasions
As stated forced ventilation and extraction is recommended for the fumes as they are toxic, and I recommend practicing techniques on spare TPE first, to master the skill sets, as these girls do this all day every day and are masters at the craft.
Anung
THE UN RAMA'S
Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl
Re: MEDIC 101- Abrasions
Re: MEDIC 101- Abrasions
thanks
Re: MEDIC 101- Abrasions
Can You please expand and explain how to use sandpapper here ...Booty Call Dolls wrote: You can use a sand paper instead and press it on the hot TPE
Thanks
Re: MEDIC 101- Abrasions
hahaha somebody just wrote stuff they have no clue about . i sure dont from description ...
thanks
- Anung Un Rama
- Doll Visionary
- Posts: 14846
- Joined: Fri Oct 31, 2014 2:27 am
- Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
- Contact:
Re: MEDIC 101- Abrasions
So with this second technique, you would use a 600 grain sand paper, over an oiled and semi molten tpe repair area, and press the paper onto the area then remove. This is an alternate form of blending used to simulate skin pores.
I discuss tpe hot work repairs here https://www.dollforum.com/forum/viewtop ... 9#p1279899 and here https://www.dollforum.com/forum/viewtop ... 7#p1281557 but I have not detailed the use of sanpaper, as I use a cotton sheet material of 200 plus thread count soaked in mineral oil, like the Chinese factories do, for blend finishing and smoothing.
Trust this assists.
Anung
THE UN RAMA'S
Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl
Re: MEDIC 101- Abrasions
also for small cuts will try make a aluminium can cut into spatula mounted around a solder iron 170 C to start and se . or if i can find some other thin metal laying around . ahhh i have some thin foil copper ... or maybe use a thin washer shim mounted on solder iron tip holder ...
again thanks for clarifying ...
V
Re: MEDIC 101- Abrasions
-
- Apprentice
- Posts: 13
- Joined: Tue Apr 23, 2019 6:19 pm
- Contact:
Re: MEDIC 101- Abrasions
It does not show anything that would cause it to be deleted by You Tube.
Re: MEDIC 101- Abrasions
-
- Apprentice
- Posts: 11
- Joined: Sun Jul 18, 2021 3:48 pm
- Location: California (northern cali)
- Contact:
Re: MEDIC 101- Abrasions
- Booty Call Dolls
- VENDOR
- Posts: 24034
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
Re: MEDIC 101- Abrasions
You might want to use CWA ( email me at yourdollusa@gmail.com) if you are in the USA
If you do not pre treat the area with baby oil and use standard glue, you will get a hard scab on her skin
-princeoverit. One vendor name kept coming up as being great at helping customers walk through the process, Booty Call Dolls. So I decided I would work with them on this first purchase, and did.
-Just in timeYou could not of found a better person to help you with your first doll. Jeff /Booty call dolls, knows his stuff... One of the few members that is a vendor and a real lover of dolls. He owns quite a few dolls, and really understands the love we all share.