Zelex SLE 164cm (Head 216) - Sinful Comforts
- setevoltas
- Super Moderator
- Posts: 8605
- Joined: Sun Oct 28, 2018 3:03 am
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Careful with "wet look" items, probably safe standing up, but under pressure like sitting down or with legs crossed, that material is notorious for dye transfer.
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
- SinfulComforts
- Contributing Poster
- Posts: 24
- Joined: Sun Feb 18, 2024 12:47 am
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
I've not had sex with a doll before this one, so I can't compare it to other dolls, but it's definitely better than a fleshlight (due to having a full body to grab onto on, and collapse into afterwards)
The rectum is a great tightness (feels tight around two fingers), vagina is expectedly a little looser, but both holes feel pretty good (I like the internal textures)
No issues with depth from either hole (I'm about 5.5-6.0 inches erect).
Sex with this doll is somewhat comparable to a real person, if not for the 'stillness' / lack of body heat I'd say.
Thank you
Yeah I considered following the 'Retayne' washing guide on here, but I opted just for repeated soaks of all the clothing. I did think this bikini was washed thoroughly enough, but I left the strings 'tied' during the soaking, and they did transfer a little dye onto her hips where the knots were (Just gonna wait out the staining for the silicone to clear itself) In future, I will likely try the Retayne or just wash much more thoroughly :Osetevoltas wrote: ↑Sun Mar 24, 2024 8:50 pm Very nice, I like the punk/ alt look.
Careful with "wet look" items, probably safe standing up, but under pressure like sitting down or with legs crossed, that material is notorious for dye transfer.
Which body/head did you order? I hope you are very happy with her, I know I am with mine
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Which body/head did you order? I hope you are very happy with her, I know I am with mine
[/quote]
I went with the 172CM and the S201 head, basically just as the promo pics showed cause I absolutely loved the look of her as she was.
- ondsdoll
- Doll Mentor
- Posts: 1154
- Joined: Thu Aug 17, 2023 10:41 am
- Location: The Netherlands
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Thanks for the info.SinfulComforts wrote: ↑Mon Mar 25, 2024 5:19 pmI've not had sex with a doll before this one, so I can't compare it to other dolls, but it's definitely better than a fleshlight (due to having a full body to grab onto on, and collapse into afterwards)
The rectum is a great tightness (feels tight around two fingers), vagina is expectedly a little looser, but both holes feel pretty good (I like the internal textures)
No issues with depth from either hole (I'm about 5.5-6.0 inches erect).
Sex with this doll is somewhat comparable to a real person, if not for the 'stillness' / lack of body heat I'd say.
Thank you
Yeah I considered following the 'Retayne' washing guide on here, but I opted just for repeated soaks of all the clothing. I did think this bikini was washed thoroughly enough, but I left the strings 'tied' during the soaking, and they did transfer a little dye onto her hips where the knots were (Just gonna wait out the staining for the silicone to clear itself) In future, I will likely try the Retayne or just wash much more thoroughly :Osetevoltas wrote: ↑Sun Mar 24, 2024 8:50 pm Very nice, I like the punk/ alt look.
Careful with "wet look" items, probably safe standing up, but under pressure like sitting down or with legs crossed, that material is notorious for dye transfer.
Which body/head did you order? I hope you are very happy with her, I know I am with mine
I am very interested in SLE dolls visually. I'm hesitant to purchase.
Often hearing that SLE is between TPE and silicone in terms of softness.
I once had a sex doll that was made of fairly hard TPE and the doll I bought after that one was an absolute upgrade in feeling for my penis because that one is much softer.
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
oh and how did you get the braces on the teeth?
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
SinfulComforts wrote: ↑Sun Mar 24, 2024 7:21 am
ALEX [THE PUNKY TOMBOY]
I plan on dressing the doll as many different 'characters', but for my first 'practice' shoot, here is 'Alex'!
Alex is (rightfully) confident in showing off her 'bombshell' figure in this wet-look bikini.
All of her clothing is from SHEIN, except her teeth braces which were hand-made by myself.
The wig is an old purchase, so I do not remember the brand (I can look into it if requested). It's a short pixie style human-hair wig.
1 (3).jpg
(NOTE: The above image was edited to remove neck seam)
1 (4).jpg
1 (1).jpg
1 (2).jpg
1 (5).jpg
1 (6).jpg
Nicely done, sinful. There is something about head 216 and the expression of the head that really lends itself to the punk look!
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Zelex 170C with “Mariana” (GE125), “Zoey” (GE98) and “Ori” (GE16)
>>> Mariana, Zoey & Ori's Thread
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
I really do like that wig on Alex. Could I please ask if you could take a few pics of Alex’s head from straight front, side and back so I can see the wig? TIASinfulComforts wrote: ↑Sun Mar 24, 2024 7:21 am [
The wig is an old purchase, so I do not remember the brand (I can look into it if requested). It's a short pixie style human-hair wig.
Zelex 170C with “Mariana” (GE125), “Zoey” (GE98) and “Ori” (GE16)
>>> Mariana, Zoey & Ori's Thread
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Hanna: viewtopic.php?t=161099
Zhen: viewtopic.php?t=160371
Sam: viewtopic.php?t=160188
Lapis: viewtopic.php?p=2251699#p2251699
Lulu: viewtopic.php?t=141384
Selene: viewtopic.php?t=178008
Emma: viewtopic.php?t=181473
- SinfulComforts
- Contributing Poster
- Posts: 24
- Joined: Sun Feb 18, 2024 12:47 am
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Ah yes, she is very pretty too! I was also tempted by the extra height, but I thought putting my doll in heels would compensate for that (but standing in heels is no simple task it seems...)I went with the 172CM and the S201 head, basically just as the promo pics showed cause I absolutely loved the look of her as she was.
I am curious about how TPE feels in terms of cuddling, and if it holds heat more easily than SLE. I have an electric blanket for my doll, but the heat doesn't stick around for too long when sleepingOften hearing that SLE is between TPE and silicone in terms of softness.
for the video, I really like to see how the doll moves without the slo mo effect. Getting a sense of how the breasts move when lightly (or heavily) shaken up and down and side to side.
Here is a video of some boob movements
The braces are 'earring backs' super glued to an unwound paperclip (with the edges of the paperclip folded on itself to prevent tearing inside the mouth). I then attached the 'braces' to her upper teeth using tiny rubberbands (usually used for holding/tying 'braided hair')oh and how did you get the braces on the teeth?
I still might make a set for the lower teeth too, so I can take pictures of my crafting process then
It's the reason I went for this face! It somewhat reminded me of a punky character I Iike from a video game (Karlee from 'Back 4 Blood')There is something about head 216 and the expression of the head that really lends itself to the punk look!
Not yet, as I plan on making different characters of the same doll. 'Alex' seems to be my 'go to' default girl for now howeverdoes she have more permanent name?
I bought the wig a long time ago, but I believe it was this one (I'm not 100% sure)Could I please ask if you could take a few pics of Alex’s head from straight front, side and back
"Short Cut Wigs,Straight Short Bob Hair Lace Front Wig MSGEM 6 Inch Pixie Cut Wigs 13x6 Lace Front T Part Wigs Pre Plucked with Baby Hair 150% Density"
Unfortunately, the Amazon page has gone for this listing, but there may be something similar/same you can find via the text above.
Thank you! Here are some quick bonus pics I took of Alex this morningShe looks great. She really comes to life in your care.
- SinfulComforts
- Contributing Poster
- Posts: 24
- Joined: Sun Feb 18, 2024 12:47 am
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
I've noticed others have had this issue with the new SLE dolls, and mine is no exception unfortunately. The silicone on one edge of the mouth is starting to tear (likely from me opening and closing the ROS jaw for photography)
I've been very careful with the mouth/jaw, and I've only used the opening for 'oral sex' once so far (albeit carefully and gently, and I with my average sized member).
It appears that the tearing may be the 'silicone paint mix' which forms the lip color, and not the core cost itself, but I'm not sure.
Due to this, I'm not sure if I should use some sil-poxy on there soon, or wait until a more prominent tear occurs... Any advice would be welcomed
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Zelex 170C with “Mariana” (GE125), “Zoey” (GE98) and “Ori” (GE16)
>>> Mariana, Zoey & Ori's Thread
- SinfulComforts
- Contributing Poster
- Posts: 24
- Joined: Sun Feb 18, 2024 12:47 am
- Contact:
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Emily [The Office ‘Workaholic’]
“It’s New Year's Eve, but you’re staying late in the office as usual… with Emily working overtime in the cubical opposite you yet again…
She convinces you to share a drink with her, which leads to another, and another…
Things get a little out of hand… I hope her husband wont find out.”
This is a ‘work in progress’ look, as I dressed her on a whim with some ‘formal office wear’ I purchased from SHEIN.
The shirt and pants ‘almost’ fit (a little too big, specifically in the ‘waist’ for the pants), but the blazer needed safety pins for it to fit adequately. I may take this as an opportunity to practice some basic tailoring however!
When I try again with Emily, she’ll likely be wearing a skirt and tights for the next shoot, which will progress through an entire ‘undressing’ sequence with upskirts etc…
Re: Zelex SLE 164cm (Head 216) - Sinful Comforts
Zelex 170C with “Mariana” (GE125), “Zoey” (GE98) and “Ori” (GE16)
>>> Mariana, Zoey & Ori's Thread