AK3-164H impressions
- RedPandamonium
- Active Member
- Posts: 108
- Joined: Fri Mar 24, 2023 3:04 pm
- Location: Romania
- Contact:
AK3-164H impressions
Now onto the actual doll and why I choose this particular model:
- full silicone because I like the look more and it's easier to maintain/ keep hygienic
- pigmented skin tone so when the paint fades it won't look weird due to the contrast
- thicc assets, while it's not a WM 173H equivalent, it has similar proportions
- good price, didn't want to splurge too much for a first doll in case I wasn't into it
- good LHP
- oral capability with ROS
The vendor did a great job in communicating with me and facilitating every request, and the shipping was also very fast as far as I'm concerned (around 1 week). Right now I'm around 90% sure I'm going to order the Zelex SLE 160J next from them towards the end of the year (unless a doll I like more shows up, though I'm quite set on this model). The AK doll arrived with a few scratches, as you'll be able to tell from the photos, but nothing serious as far as I could see.
The doll does feel very nice to the touch, though it does get sticky if not powdered and it attracts dust/lint like nothing else. She also seems to leak some oil, which I assume is due to the softer silicone blend. I've been showering her constantly, but I don't mind it (groping those curves doesn't seem to get old).
As for how intercourse feels, the canals are comfortable and fairly stimulating, but they're far from being so tight that they choke your member out of existence. Even with my aforementioned issues, I managed to finish a few times with the doll alone (and some Kindroid assistance), though I haven't used her nearly as much as I wanted to yet, since I'm waiting for a better cleaning kit to arrive (default irrigator is...inadequate to say the least).
Overall I'm pleased with the purchase and I can see myself getting plenty of use out of the doll. Let me know if you have any questions and I'll try to answer them. I'll leave some pics below.
Apologies for the photo quality, but I rarely change phones so the camera on this one isn't great.
My LoveNestle Aubrey: viewtopic.php?t=182219
Wishlist: Zelex SLE 160J 206 | XT Doll 160H XT-2 | Piper 150cm Jessica | Elsababe 160L/148L Sakai | LoveNestle Vanessa | HR 158 silicone | Starpery 148F Hedy
Re: AK3-164H impressions
Previous Dolls
WM164D S29
Desi - SM156A X8 -replacement- TBA
Zhuhua - IT165 S6 -replacement- TBA
Wishlist
JSD 160E
AK6 157cm
Sino S161
Sanhui 163
“Imagination is more important than knowledge.” ~ Confucius
- RedPandamonium
- Active Member
- Posts: 108
- Joined: Fri Mar 24, 2023 3:04 pm
- Location: Romania
- Contact:
Re: AK3-164H impressions
Thank you, was looking into more Coeros stuff including stands. I'll likely get a couple later, but I did order her with feet bolts, so she should be reasonably safe for now.Zenrel wrote: ↑Sun Apr 14, 2024 7:01 am She looks very lovely! Good choice for getting cleaning kit for the canals. It's so tight and pretty deep the irrigator can't clean very well and still leave a lot of substance in there. I also recommend a hanging stand (like coeros hydraulic or electric stand) you have hard feet and like to have her standing for long peroid of time, it'll protect her feet.
My LoveNestle Aubrey: viewtopic.php?t=182219
Wishlist: Zelex SLE 160J 206 | XT Doll 160H XT-2 | Piper 150cm Jessica | Elsababe 160L/148L Sakai | LoveNestle Vanessa | HR 158 silicone | Starpery 148F Hedy
- SeaMonkey555
- Contributing Poster
- Posts: 41
- Joined: Mon Apr 17, 2023 11:22 am
- Contact:
Re: AK3-164H impressions
Depending on how handy you are and your living situation you can also consider a home made irrigator. I have an eye hook drilled into my ceiling of my standing shower that my dolls can hang from (must install into a stud or joist), and a pet cleaning shower attachment hose. I super-glued a small funnel to a plastic reusable drinking straw, that I can press against the tip of the hose, to channel the water to the back of the love holes for cleaning. Everything cost less than $50 on Amazon. The hose attachment is also great for cleaning the rest of her. It's convenient and very effective.
Re: AK3-164H impressions
I have been searching a long time for a review of this doll. I only had tpe dolls and a siliconen one like this would be my first.
Can you tell me if its easy to move around with this model?
I hope to see more pictures
- ondsdoll
- Doll Mentor
- Posts: 1154
- Joined: Thu Aug 17, 2023 10:41 am
- Location: The Netherlands
- Contact:
Re: AK3-164H impressions
- RedPandamonium
- Active Member
- Posts: 108
- Joined: Fri Mar 24, 2023 3:04 pm
- Location: Romania
- Contact:
Re: AK3-164H impressions
Thanks for the tips! For now I opted to try out the Coeros cleaning kit before any other experimenting. Glad you're enjoying your Zelex! My 2nd doll is going to be SLE most likely.SeaMonkey555 wrote: ↑Mon Apr 15, 2024 12:37 pm Thanks so much for posting! I was on the fence about getting this doll for a long time, but nobody reviewed her on the forums, so I ended up getting a Zelex 164G. I'm very pleased with what I got, but maybe I'll consider the AK3 for my next purchase.
Depending on how handy you are and your living situation you can also consider a home made irrigator. I have an eye hook drilled into my ceiling of my standing shower that my dolls can hang from (must install into a stud or joist), and a pet cleaning shower attachment hose. I super-glued a small funnel to a plastic reusable drinking straw, that I can press against the tip of the hose, to channel the water to the back of the love holes for cleaning. Everything cost less than $50 on Amazon. The hose attachment is also great for cleaning the rest of her. It's convenient and very effective.
She's probably around 35-40 kg (80+ lbs) with the head, so definitely not easy to move as you like, but manageable. It's really awkward moving dolls honestly, I'm always paranoid I'm damaging something. It's much harder to move than a dumbell, which has even weight distribution and you don't really care if it bumps into something or has any pressure on it.
I'll leave a few more pics from today:
Thank you!
My LoveNestle Aubrey: viewtopic.php?t=182219
Wishlist: Zelex SLE 160J 206 | XT Doll 160H XT-2 | Piper 150cm Jessica | Elsababe 160L/148L Sakai | LoveNestle Vanessa | HR 158 silicone | Starpery 148F Hedy
Re: AK3-164H impressions
- RedPandamonium
- Active Member
- Posts: 108
- Joined: Fri Mar 24, 2023 3:04 pm
- Location: Romania
- Contact:
Re: AK3-164H impressions
Glad it helped!
My LoveNestle Aubrey: viewtopic.php?t=182219
Wishlist: Zelex SLE 160J 206 | XT Doll 160H XT-2 | Piper 150cm Jessica | Elsababe 160L/148L Sakai | LoveNestle Vanessa | HR 158 silicone | Starpery 148F Hedy
- ondsdoll
- Doll Mentor
- Posts: 1154
- Joined: Thu Aug 17, 2023 10:41 am
- Location: The Netherlands
- Contact:
Re: AK3-164H impressions
Because colored clothes could stain
- RedPandamonium
- Active Member
- Posts: 108
- Joined: Fri Mar 24, 2023 3:04 pm
- Location: Romania
- Contact:
Re: AK3-164H impressions
Just one wash, most of the black ones were fine even after days of continuous use, with one exception. A small top left some stains under the arms when held tight, but the stains disappeared in a couple of days.
My LoveNestle Aubrey: viewtopic.php?t=182219
Wishlist: Zelex SLE 160J 206 | XT Doll 160H XT-2 | Piper 150cm Jessica | Elsababe 160L/148L Sakai | LoveNestle Vanessa | HR 158 silicone | Starpery 148F Hedy
- SinsuaLuvr
- Doll Mentor
- Posts: 1717
- Joined: Tue Nov 30, 2004 12:00 am
- Location: Alaska
- Contact:
Re: AK3-164H impressions
Thank you for sharing lovely photos of your gurl and your thoughts. She is very sweet and photogenic -as are most AK gurls.
This model was in my consideration but the height and weight steered me to me AK6 157
Looking forward to you sharing more about your journey….
April - 80cm elfling (silicone-9lbs) ~ 2016 from JM Dolls
Tawney - 132cm {Lexi head} - (silicone-45lbs) ~ 2017 from Private Island Beauties
Sophie - Piper 100cm {Jessica head} - (silicone-28lbs) ~ 2024 from SexDollCanada
Olivia - AK6 157cm {#45 head} - (silicone-68lbs) ~ 2024 from RosemaryDoll
”My Better Half” - 90cm Legs & Hips (TPE - 24lbs) ~ 2024 Seiraku Toys from Onahole
- setevoltas
- Super Moderator
- Posts: 8600
- Joined: Sun Oct 28, 2018 3:03 am
- Contact:
Re: AK3-164H impressions
-
- Active Poster
- Posts: 79
- Joined: Tue May 23, 2023 9:24 pm
- Contact:
Re: AK3-164H impressions
Im pretty sure you're going to have an unforgettable honeymoon.
- cycleingking
- Doll Mentor
- Posts: 1025
- Joined: Mon Mar 21, 2022 12:57 am
- Location: Middle of America engulfed by mistresses
- Contact:
Re: AK3-164H impressions
Once you get yourself a silicone doll you'll appreciate these kind of concerns being a thing of the past
Passionate about ROS, LHP and Silicone
Mistresses