Teeth&Tongue set 2.0 is out!
Re: Teeth&Tongue set 2.0 is out!
Can items, especially teeth, be retrofitted into
dolls that have their mouth slightly open?
Can you accept orders for certain items,
or is it necessary to buy entire set?
Thanks much!
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1969
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Thank you for bumping this thread. It's nice to see other Doll's heads fitted with the Teeth&Tongue set.Dollstudio wrote:Tweet: https://twitter.com/DollStudioEU/status ... 4854008832
Thank you as well for promoting my product so well.
The Doll head needs an oral mouth for the teeth inserts. The Teeth&Tongue may look better with heads which don't have teeth. I have eliminated the ones that where present on the #36 head because of this. While a few people have now used the set on different brands of Dolls, I have myself only experimented with the WM #36 head so far.Mongoose wrote:Can items, especially teeth, be retrofitted into
dolls that have their mouth slightly open?
For the moment I prefer to sell entire sets. If you need anything special, PM me and I'll see what I can do.Mongoose wrote:Can you accept orders for certain items,
or is it necessary to buy entire set?
Now I have one good news and one bad news:
- The good news for me is that the entire first batch of sets is now gone.
- The bad news for potential new customers is that I have to produce another batch for a special order which will take me at least two weeks to produce. After that I can resume with the "normal" orders. This means the next sets will only be available in three weeks. Sorry guys.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
Re: Teeth&Tongue set 2.0 is out!
Do you think it would be possible to create a mouthpiece that would simulate a partial smile?
Re: Teeth&Tongue set 2.0 is out!
Here you go in all seriousness i wouldn t try these on TPE as they look like silicone.TTNLBTPD wrote:Von,
Do you think it would be possible to create a mouthpiece that would simulate a partial smile?
Re: Teeth&Tongue set 2.0 is out!
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1969
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
I don't think this is possible. Smiling would require the whole lower face to be modified. Maybe a grin could be achieved but certainly not a nice smile. However, I would be very happy if someone could prove me wrong!TTNLBTPD wrote:Do you think it would be possible to create a mouthpiece that would simulate a partial smile?
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- Mike Tango
- Senior Member
- Posts: 357
- Joined: Sun Sep 06, 2015 9:13 pm
- Location: Canada
- Contact:
Re: Teeth&Tongue set 2.0 is out!
- Mike Tango
- Senior Member
- Posts: 357
- Joined: Sun Sep 06, 2015 9:13 pm
- Location: Canada
- Contact:
Re: Teeth&Tongue set 2.0 is out!
- ILuvFemsNlingerie
- Doll Elder
- Posts: 2563
- Joined: Wed Dec 17, 2008 12:00 am
- Location: Louisiana
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Something that goes into the mouth all the way in and when your done just pull it out like an insert and you could put texture inside for stimulation. This would keep you from having to clean the inside of the head and to avoid moisture or mold.
Just a thought
Re: Teeth&Tongue set 2.0 is out!
Thanks for the reply. I'm not thinking about a whole smile myself. I think a grin is a better term. What I was thinking is an insert such as yours that could lift the cheeks just a bit as to create the look of a grin or small smile.I don't think this is possible. Smiling would require the whole lower face to be modified. Maybe a grin could be achieved but certainly not a nice smile.
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1969
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
I can try to make this. But it is not on my priority list for the moment. I have other stuff in the queue I want to do before.TTNLBTPD wrote:Thanks for the reply. I'm not thinking about a whole smile myself. I think a grin is a better term. What I was thinking is an insert such as yours that could lift the cheeks just a bit as to create the look of a grin or small smile.
I designed my set on the WM#36 head. Not the smallest and not the biggest. I don't own all the heads available on the market (I wish I would ) so I can't tell for the others until someone tries out. Below are two animations a customer sent to me a couple of days ago (a big thank you to him!). Now we know the Teeth&Tongue set work for the YLDoll Linda and Shael heads as well.Mike Tango wrote:Your sets work will each size of head ? (for head of 135cm and higher I am interested to know).
I find it especially suits the Shael head nicely. I think of making vampire teeth and snake tongues for a Halloween set. It would fit the Elf heads perfectly. What do you think?
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
-
- Basic Poster
- Posts: 7
- Joined: Sat Feb 18, 2017 12:06 pm
- Contact:
Re: Teeth&Tongue set 2.0 is out!
I'm a newby and am awaiting a 138cm doll with wm head #59 enhanced with tongue & uvula. Do you expect your creation to work with and/or enhance the oem tongue and uvula?
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1969
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Frankly I don't know. I don't own such a head yet. If the tongue doesn't take too much place I'd say yes but I can guarantee it.notoriousLRG wrote:I'm a newby and am awaiting a 138cm doll with wm head #59 enhanced with tongue & uvula. Do you expect your creation to work with and/or enhance the oem tongue and uvula?
As for enhancing the oem tongue and uvula:
- YES for the appearance (provided it fits) since it gives the possibility to have more facial expressions.
- most definitely NO for the sexual experience because the parts are made of solid resin. Once inserted in the mouth, there is no room for something else if you know what I mean.
However, if you have a fetish for facial cumshots, there are some tongues which can fulfill this fantasy in my set, giving the head this "cum on my face" look.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- Mike Tango
- Senior Member
- Posts: 357
- Joined: Sun Sep 06, 2015 9:13 pm
- Location: Canada
- Contact:
Re: Teeth&Tongue set 2.0 is out!
I ordered my set too !
By the way, Von is a really nice guy.
Thank you Von !
- Fantastic Plastic
- Doll Elder
- Posts: 2358
- Joined: Mon Nov 28, 2016 9:17 pm
- Location: In a harem of beautiful love dolls!
- Contact:
Re: Teeth&Tongue set 2.0 is out!
And yes VonRubber is a super nice guy.